Getting Started

Connecting to Tally

For information on the available WHL files for supported environments, and how to install the appropriate file for your Python distribution, see Package Installation.

For information on the module to import, and how to configure the necessary connection properties in a connection string, see Establishing a Connection.

Other available connection properties can be used to configure other aspects of the connector capabilities.

Python Version Support

The CData Python Connector for Tally can be installed and used in Python 3.10 or newer.

Tally Version Support

The connector leverages the Tally API to enable access to Tally. The connector supports both Tally ERP 9 and Tally Prime.

Package Installation

Dependencies

The Python connectors require that Python 3.10 or newer be installed.

Installation

The CData Python Connector for Tally is available as a WHL file for Windows, Linux, and Mac. Each connector is built using the Python 3.10 Stable ABI (indicated by the abi3 tag in the filename), so a single wheel supports any Python 3.10 or newer installation — there is no need to match your exact Python minor version. Use the "pip install" command with the appropriate WHL file for your platform.

Windows:

pip install cdata_tally_connector-26.0.9655-cp310-abi3-win_amd64.whl

Linux:

pip install cdata_tally_connector-26.0.9655-cp310-abi3-linux_x86_64.whl

macOS:

pip install cdata_tally_connector-26.0.9655-cp310-abi3-macosx_12_0_arm64.whl

The macOS wheel supports arm64 (Apple Silicon) architectures only on macOS 12 and newer.

Regardless of the environment, certain distributions might require that the "pip3 install" command be used instead, to differentiate from a Python 2 distribution that might exist already. After installation, confirm whether the connector is successfully installed by running the "pip list" command. If "cdata_tally_connector" is present in the list output by the command, then the installation was successful.

Upgrading

When upgrading, "pip install" does not automatically clean up old JRE files. To avoid leftover files that could cause JVM errors, uninstall the previous version before installing the new one.

Licensing

After the installation is complete, a separate step is needed to activate a license for the connector. Among the CData assets in the distribution's site packages, there is an install-license tool that activates this license. From within the distribution's site-packages folder, after navigating to the "cdata/installlic_tally" folder, simply use a command like the below to activate the license. Omitting the <key> argument activates a trial license:

Windows:
```
./install-license.exe <key>
```
Linux / Mac:
```
./install-license.sh <key>
```

Sometimes, file access issues may cause pip to install the connector in a fallback file path that is not the python distribution's main or primary site-packages location. This can make it difficult to find where the connector was installed, and from there, the license activator. In that event, this python script below will print out the full file path of the connector's native file. This file will be stored in the mentioned cdata folder, from which the installlic_tally folder is trivial to find:

import os
import cdata.tally
path = os.path.abspath(cdata.tally.__file__)
print(path)

Uninstallation

If the connector needs to be uninstalled for any reason, do so by running the pip uninstall command, as in the example below:

pip uninstall cdata-tally-connector

Establishing a Connection

The objects available within our connector are accessible from the "cdata.tally" module. To use the module's objects directly:

Import the module as follows:
```
import cdata.tally as mod
```
To establish a connection string, call the connect() method from the connector object using an appropriate connection string, such as:
```
mod.connect("Url='http://localhost:9000'")
```

Connecting to Tally

Set the following connection properties to connect to Tally Instance:

URL (Set this to the URL for Tally instance. For example: http://localhost:9000).

Configuring JNI

Java Native Interface (JNI) is a standard programming interface for writing Java native methods and embedding the Java virtual machine into native applications.

The connector leverages the JNI for improved performance on Mac and Linux.

Configure the Config INI File

The Linux and Mac editions of the Tally python connector are configured with an ini file. This file is used to set several parameters, including JNI behavior. This file is to be located in:

{path_to_distribution_site-packages}/cdata/config.ini

Ensure that any configuration properties you set in the ini file fall under the following section name (adjust the 311 number if you are using an different python version from 3.11):

For Linux:
```
[tally.cpython-311-x86_64-linux-gnu.so]
```
For Mac:
```
[tally.cpython-311-darwin.so]
```

Configure the JNI connector's behavior by editing the properties in the connector's config.ini file. The connector can be configured as follows:

LOGFILE: Set this the same way as the CDATA_LOGFILE envrionment variable below.
JAVA_HOME: Configure the path to the JVM library location used to launch the JVM.
CLASS_PATH: Use a colon-separated list to configure the paths to the third-party jar libraries.

Configure Environment Variables

Additionally, set the following environment variables:

CDATA_JAVA_HOME: Configure the path to the JVM library location used to launch the JVM.
CDATA_JVM_OPTIONS: Place JVM options here.
CDATA_LOGFILE: Set this in the following scheme: <SCHEME>://<TAG>[|<LEVEL>]
- SCHEME: The options are STDOUT, FILE.
  - STDOUT: Both the native wrapper and odbc core log into stdout. The Logfile and Verbosity properties can override the behavior of ODBC core.
  - FILE: The native wrapper logs into <FILENAME> while the odbc core logs into <FILENAME>.driver.log. The Logfile and Verbosity properties can override the behavior of ODBC core.
- TAG
  - For STDOUT, set this to 1. For FILE, set this to the filename.
- LEVEL
  - Set to one of: FATAL | ERROR | WARNING | INFO | DEBUG

The following are some examples of this syntax:

STDOUT://1|DEBUG
FILE:///tmp/my_py.log|DEBUG

Custom Logger

The Python connector supports a custom logging mechanism for redirecting log output to any destination, such as a cloud storage service or logging framework. Use setCustomLoggerFactory() to register a factory function that creates a logger instance for each connection.

The factory function receives the context string from the Logfile connection property (the portion after CUSTOM://) and must return an object with a writeLog(verbosity, message) method.

To enable custom logging:

Call setCustomLoggerFactory() with your factory function before opening connections.
Set Logfile to CUSTOM:// followed by a context string to identify the connection.
Set Verbosity to the desired log level.

The following example demonstrates a custom logger factory that creates a separate logger instance per connection:

import cdata.tally as mod
import time

class MyLogger:
    def __init__(self, loggerId):
        self.loggerId = loggerId
    def writeLog(self, verbosity, message):
        print("[MyLogger " + self.loggerId + "] " + message)

def createLogger(context):
    return MyLogger(context[len("MyLoggerId="):])

mod.setCustomLoggerFactory(createLogger)

conn1 = mod.connect("...;Logfile=CUSTOM://MyLoggerId=1;Verbosity=2;")
# do something with conn1
time.sleep(1)  # Wait for logs to flush from conn1

conn2 = mod.connect("...;Logfile=CUSTOM://MyLoggerId=2;Verbosity=2;")
# do something with conn2
time.sleep(1)  # Wait for logs to flush from conn2

Changelog

General Changes


Date	Version	Source	Category	Type	Description
2026-05-27	26.0.9643	General	Connection	Removed	Removed the deprecated ReplaceInvalidTypesWithNull connection property. Use the ReplaceInvalidValuesWithNull property instead.
2026-05-22	26.0.9638	Python		Removed	Remove support for Intel x64 architecture on macOS
2026-05-07	26.0.9623	General	Data Model	Added	Added the ColumnCapabilities column to the sys_tablecolumns system table. This column is a bit mask denoting the column's write capabilities.
2026-05-07	26.0.9623	Python		Changed	Updated embedded JRE to jre-17.0.19+10 (Linux x64 / MacOs x64).
2026-04-15	26.0.9601	General	Query Exec	Changed	String comparisons using GREATER, LESS, and CONTAINS operators are now case-insensitive by default.
2026-04-08	26.0.9594	Tally	Security	Changed	TLS 1.3 is now supported by default for HTTP connections.
2026-04-01	26.0.9587	Tally		Removed	Removed the BatchSize connection property.
2026-01-13	25.0.9509	General		Added	Added support for the REGEXP_REPLACE() string function.
2025-12-21	25.0.9486	Python		Added	Added support for custom loggers in Python connectors on Linux and macOS.
2025-12-05	25.0.9470	General		Added	Added support for the INSERT INTO SELECT statement, with driver-side execution for providers that do not support the operation natively.
2025-10-30	25.0.9434	Python		Changed	Updated embedded JRE to jre-17.0.17+10 (Linux x64 / MacOs x64).
2025-10-06	25.0.9410	General		Added	Support for parsing datetime formats using ".S" and ",S" for milliseconds and nanoseconds.
2025-09-12	25.0.9386	General		Added	Added the IsInsertable, IsUpdateable, and IsDeleteable columns to the sys_tables table.
2025-09-10	25.0.9384	General		Changed	All columns in statically defined Views are now reported as read-only.
2025-09-03	25.0.9377	General		Changed	Corrected the behavior when IN criteria with NULL values are used in the projection part. It now returns NULL instead of 0. For example, "NULL IN (1,2)" returns "NULL".
2025-09-01	25.0.9375	General		Added	Added support for using the CAST function with infinity values. This function can cast "inf" and "-inf" to DOUBLE, FLOAT, or REAL.
2025-08-21	25.0.9364	General		Changed	Report behavior change: Fixed inconsistent string value comparisons in non-table queries. For example, "SELECT 'A' = 'a'" previously returned false, but it now returns true.
2025-08-13	25.0.9356	General		Changed	Changed the maximum number of pages held in memory from 15 to 5 for the page providers to decrease heap usage.
2025-07-07	25.0.9319	Python		Removed	Removed the 32-bit version of Windows Python.
2025-07-02	25.0.9314	Python		Removed	Removed support for Python 3.9.
2025-06-25	25.0.9307	General		Removed	Removed the "ADLS Gen 1" value from the ConnectionType property.
2025-06-25	25.0.9307	Python		Added	Added support for Python 3.13 in Windows, Linux, and Mac editions.
2025-06-25	25.0.9307	Python		Removed	Removed support for Python 3.8 as it is no longer supported.
2025-06-20	25.0.9302	General		Added	Created the following functions: TEXT_ENCODE: encodes a string into a different charset (UTF8 → UTF7 and returns a binary array as the result). TEXT_DECODE: takes a binary array and decodes it back into a string when provided the charset. BASE64_ENCODE: takes a binary array and encodes it as a base64 string (varchar). BASE64_DECODE: takes a base 64-encoded string and decodes it into a binary array.
2025-06-18	25.0.9300	General		Changed	The internal code for exception handling has been refactored. Exception messages returned during certain error conditions may now have different wording or formatting.
2025-05-27	25.0.9278	General		Removed	Removed the "Proprietary" enum option from ProxyAuthscheme.
2025-05-12	25.0.9263	Python		Changed	Updated embedded JRE to jre-17.0.15+6 (Linux x64 / MacOS x64) and jre-17.0.15+6 (MacOS aarch64).
2025-02-15	24.0.9177	General		Added	Added support for converting unsigned integer types to the nearest signed data type that has enough precision to hold the unsigned value.This is done for JDBC only because it does not have support for unsigned data types.
2024-11-27	24.0.9097	General		Added	Added ThreadId to LogModule output. Logfile lines now include the Thread ID associated with the action being performed.
2024-06-05	24.0.8922	Python		Added	Added support for Python 3.12.
2024-05-09	24.0.8895	General		Changed	The ROUND function previously did not accept negative precision values. That feature has now been restored.
2024-03-15	23.0.8840	General		Added	Created a new SQL function called STRING_COMPARE that provides java's String.compare() ability to SQL queries. Returns a number representative of the compared value of two strings
2023-11-29	23.0.8733	General		Changed	The ROUND function doesn't accept the negative precision values anymore.
2023-11-29	23.0.8733	General		Changed	The returning types of the FDMonth, FDQuarter, FDWeek, LDMonth, LDQuarter, LDWeek functions are changed from Timestamp to Date. The return type of the ABS function will be consistent with the parameter value type.
2023-11-28	23.0.8732	General		Added	Added the HMACSHA256 formatter to allow for secrets to be decoded if it is in base64 format
2023-08-29	23.0.8641	Python		Added	Added support for SQLAlchemy 2.0.
2023-06-20	23.0.8571	General		Added	Added the new sys_lastresultinfo system table.
2023-05-19	23.0.8539	Python		Added	Added support for Python 3.11 on Windows, Linux and Mac.
2023-05-16	23.0.8536	Python		Removed	Removed support for Python 3.7 on Windows and Linux
2023-04-25	23.0.8515	General		Removed	Removed support for the SELECT INTO CSV statement. The core code doesn't support it anymore.
2022-12-14	22.0.8383	General		Changed	Added the Default column to the sys_procedureparameters table.
2022-11-15	22.0.8354	Python		Changed	Updated embedded JRE to jre8u345-b01(Linux x64 / MacOS x64) and jre-17.0.5+8(MacOS aarch64).
2022-09-30	22.0.8308	General		Changed	Added the IsPath column to the sys_procedureparameters table.
2022-09-30	22.0.8308	Tally		Added	Added the FileData output parameter and Encoding input parameter to print the response on the CreateSchema stored procedure. Added the FileStream parameter to support outputstream on the CreateSchema stored procedure.
2022-09-21	22.0.8299	Tally		Added	Added the Content input parameter to add input streams on the ImportData stored procedure. Added the FileData output parameter and Encoding input parameter to print the response in the ExportReport stored procedure. Added the FileStream parameter to support output streams on the ExportReport stored procedure.
2022-05-18	22.0.8173	Python		Added	Added support for Python 3.10 on Windows, Linux, and Mac Added support for Python 3.9 on Mac Added support for Mac M1
2022-05-18	22.0.8173	Python		Removed	Removed support for Python 3.6 on Windows and Linux
2021-09-02	21.0.7915	General		Added	Added support for the STRING_SPLIT table-valued function in the CROSS APPLY clause.
2021-08-07	21.0.7889	General		Changed	Added the KeySeq column to the sys_foreignkeys table.
2021-08-06	21.0.7888	General		Changed	Added the new sys_primarykeys system table.
2021-07-23	21.0.7874	General		Changed	Updated the Literal Function Names for relative date/datetime functions. Previously, relative date/datetime functions resolved to a different value when used in the projection as opposed to the predicate. For example: SELECT LAST_MONTH() AS lm, Col FROM Table WHERE Col > LAST_MONTH(). Formerly, the two LAST_MONTH() methods would resolve to different datetimes. Now, they will match. As a replacement for the previous behavior, the relative date/datetime functions in the criteria may have an 'L' appended to them. For example: WHERE col > L_LAST_MONTH(). This will continue to resolve to the same values that were previously calculated in the criteria. Note that the "L_" prefix will only work in the predicate - it not available for the projection.
2021-04-23	21.0.7783	General		Changed	Updated how display sizes are determined for varchar primary key and foreign key columns so they will match the reported length of the column.
2021-04-16	21.0.7776	General		Changed	Reduced the length to 255 for varchar primary key and foreign key columns.
2021-04-16	21.0.7776	General		Changed	Updated implicit and metadata caching to improve performance and support for multiple connections. Old metadata caches are not compatible - you need to generate new metadata caches if you are currently using CacheMetadata.
2021-04-16	21.0.7776	General		Changed	Updated index naming convention to avoid duplicates.

Using the Connector

This section provides a walk-through for writing Tally data access code in Python script.

For more information on the available data source entities and how to query them with SQL, see Data Model. For the SQL syntax, see SQL Compliance.

Connecting from Code

For information on how to deploy the connector and configure the connection to Tally, see Package Installation and Establishing a Connection.

For information on how to connect with the tally.connector module and its related classes, see Connecting.

Executing SQL

The connection's cursor object is used to directly execute SQL queries. For information on how to execute SELECT statements and process the returned result sets, see Querying Data.

Executing Stored Procedures

You can call stored procedures by using the EXECUTE statement. For further information, see Calling Stored Procedures.

Connecting

Connecting with the cdata.tally Module:

The connector's module is used directly to establish a connection with the data source. It does this by using a connection string as its argument. For example:

import cdata.tally as mod
conn = mod.connect("Url='http://localhost:9000'")

Once the connection is created, you can use it to execute subsequent SQL queries.

Querying Data

After connecting as described in Connecting, you can use the open connection to execute SQL statements.

Executing Queries

To execute SQL statements that return data, use the execute() method. Once a query is executed, the result set is fetched from the cursor. This result set can then be iterated over to process the records individually.

For example:

cur = conn.execute("SELECT Name, Address FROM Company")
rs = cur.fetchall()
for row in rs:
	print(row)

Parameterized Queries

Various Python collections, such as arrays and tuples, can act as additional arguments for the execute() method. This enables you to parameterize the queries executed and help to prevent SQL Injection.

For example:

cmd = "SELECT Name, Address FROM Company WHERE CompanyNumber = ?"
params = ["1000"]
cur = conn.execute(cmd, params)
rs = cur.fetchall()
for row in rs:
	print(row)

Calling Stored Procedures

You can execute stored procedures using either the execute() or callproc() method of the connection.

Calling Stored Procedures Using Execute()

When you call stored procedures by issuing EXECUTE commands, the stored procedure arguments are parameterized. For example:

cmd = "EXECUTE CreateSchema TableName = ?"
params = ["Company"]
conn.execute(cmd, params)

Calling Stored Procedures Using Callproc()

When you call stored procedured by issuing the callproc() method, the stored procedure arguments are a procedure name and a list of parameters. For example:

cur = conn.cursor()
params = ["Company"]
cur.callproc("CreateSchema", params)

Using from Tools

The connector is integrated with other tools and packages within Python.

Python Integration Guides

The following sections show how to create and use connections with the connector in common packages in Python:

From SQLAlchemy
From Pandas
From Matplotlib
From Petl

Complete List of Tally Integration Quickstarts

For information on connecting from other applications, see Tally integration guides.

From SQLAlchemy

The CData Python Connector for Tally includes a Dialect class that enables integration with SQLAlchemy. Bear in mind that several aspects of connector functionality are not currently supported in SQLAlchemy 2.0 or above. If necessary, downgrade SQLAlchemy to version 1.4 or 1.3 before using this connector.

The following sections detail various aspects of this integration:

Connecting From SQLAlchemy

To construct a URL with which SQLAlchemy loads and uses the appropriate connector automatically, see Connecting

Reflecting Metadata With SQLAlchemy

To learn how to model Tally tables with mapped classes, see Reflecting Metadata.

Querying Data From SQLAlchemy

To learn how to use mapped classes to query the associated tables, see Querying Data.

Connecting

Connecting With a Dialect URL

Establishing a connection using SQLAlchemy requires a specific URL format.

from sqlalchemy import create_engine
engine = create_engine("tally:///?Url='http://localhost:9000'")

For SQLAlchemy 2.0, the dialect name is tally_2. To establish a connection, use the following URL format:

from sqlalchemy import create_engine
engine = create_engine("tally_2:///?Url='http://localhost:9000'")

Reflecting Metadata

SQLAlchemy can act as an Object-relational Map (ORM). This enables you to treat records of a database table as instantiable records. To leverage this functionality, you must reflect the underlying metadata in one of the following ways.

Note: The following examples employ SQLAlchemy 1.4.

Modeling Data Using a Mapping Class

Use "sqlalchemy.ext.declarative.declarative_base" to declare a mapping class for the table you wish to model in the ORM. A known table in the data model is modeled either partially or completely, as shown in the following example:

from sqlalchemy.ext.declarative import declarative_base
Base = declarative_base()
class Company(Base):
	__tablename__ = "Company"
	Id = Column(String, primary_key=True)
	Name = Column(String)
	Address = Column(String)

Automatically Reflecting Metadata

Rather than mapping tables manually, SQLAlchemy can discover the metadata for one or more tables automatically. To accomplish this across the entire data model, use automap_base:

from sqlalchemy import MetaData
from sqlalchemy.ext.automap import automap_base
meta = MetaData()
abase = automap_base(metadata=meta)
abase.prepare(autoload_with=engine)
Company = abase.classes.Company

You can also reflect a single table with an inspector. When reflecting this way, providing a list of specific columns to map is optional:

from sqlalchemy import MetaData, Table
from sqlalchemy import inspect
meta = MetaData()
insp = inspect(engine)
Company_table = Table("Company", meta)
insp.reflect_table(Company_table, ["Id","Address"])

Querying Data

After you use the steps in Connecting to connect, and use one of the methods in Reflecting Metadata to reflect some of the metadata, you can use a session object to query data.

Querying Data Using the Query Method

If the mapping class has been prepared, use it with a session object to query the data source. After binding the engine to the session, provide the mapping class to the session's query method.

For example:

engine = create_engine("tally:///?Url='http://localhost:9000'")
factory = sessionmaker(bind=engine)
session = factory()
for instance in session.query(Company).filter_by(CompanyNumber="1000"):
	print("Id: ", instance.Id)
	print("Name: ", instance.Name)
	print("Address: ", instance.Address)
	print("---------")

Querying Data Using the Execute Method

The session object can also run the query with the execute() method alongside the appropriate Table object. Assuming you have an active session, the following is just as viable:

Company_table = Company.metadata.tables["Company"]
for instance in session.execute(Company_table.select().where(Company_table.c.CompanyNumber == "1000")):
	print("Id: ", instance.Id)
	print("FullName: ", instance.Name)
	print("City: ", instance.BillingCity)
	print("---------")

Executing JOINs

Implicit Joining

If mapped classes of related Tally objects have a singular foreign key relationship, the classes are implicitly joined. After importing the necessary objects, a relationship is established between your two mapped classes, as in the example below:

from sqlalchemy.ext.declarative import declarative_base
from sqlalchemy import Column, String, Integer, DateTime, ForeignKey
from sqlalchemy.orm import sessionmaker, relationship

Base = declarative_base()
class Contact(Base):
	__tablename__ = "Contact"
	Id = Column(Integer, primary_key=True)
	Name = Column(String)
	Email = Column(String)
	BirthDate = Column(DateTime)
	AccountId = Column(String, ForeignKey("Account.Id"))
	Account_Link = relationship("Account", back_populates="Contact_Link")

class Account(Base):
	__tablename__ = "Account"
	Id = Column(String, primary_key=True)
	Name = Column(String)
	BillingCity = Column(String)
	NumberOfEmployees = Column(Integer)
	Contact_Link = relationship("Contact", order_by=Contact.Id, back_populates="Account_Link")

Once the relationship is established, the tables are queried simultaneously using the session's query() method. For example:

rs = session.query(Account, Contact).filter(Account.Id == Contact.AccountId)
for Ac, Ct in rs:
  print("AccountId: ", Ac.Id)
  print("AccountName: ", Ac.Name)
  print("ContactId: ", Ct.Id)
  print("ContactName: ", Ct.Name)

Other Join Forms

In situations where mapped classes have either no foreign keys or multiple foreign keys, you may need different forms of the JOIN query to accommodate them. Using the earlier classes as examples, the following JOIN queries are possible as well:

Explicit condition (necessary if there are no foreign keys in your mapped classes):

rs = session.query(Account, Contact).join(Contact, Account.Id == Contact.AccountId)
for Ac, Ct in rs:

Left-to-right relationship:

rs = session.query(Account, Contact).join(Account.Contact_Link)
for Ac, Ct in rs:

Left-to-right relationship with explicit target:

rs = session.query(Account, Contact).join(Contact, Account.Contact_Link)
for Ac, Ct in rs:

String form of a left-to-right relationship:

rs = session.query(Account, Contact).join("Contact_Link")
for Ac, Ct in rs:

Other SQL Clauses

SQLAlchemy ORM also exposes support for other clauses in SQL, such as ORDER BY, GROUP BY, LIMIT, and OFFSET. All of these are supported by this connector:

ORDER BY

The following example sorts by a specified column using the session object's query() method:

rs = session.query(Company).order_by(Company.STCrAdjPercent)
for instance in rs:
	print("Id: ", instance.Id)
	print("Name: ", instance.Name)
	print("Address: ", instance.Address)
	print("---------")

You can also use the session object's execute() method perform an ORDER BY. For example:

rs = session.execute(Company_table.select().order_by(Company_table.c.STCrAdjPercent))
for instance in rs:

GROUP BY

The following example uses the session object's query() method to group records with a specified column:

rs = session.query(func.count(Company.Id).label("CustomCount"), Company.Name).group_by(Company.Name)
for instance in rs:
	print("Count: ", instance.CustomCount)
	print("Name: ", instance.Name)
	print("---------")

You can also use the session object's execute() method to perform a GROUP BY:

rs = session.execute(Company_table.select().with_only_columns([func.count(Company_table.c.Id).label("CustomCount"), Company_table.c.Name]).group_by(Company_table.c.Name))
for instance in rs:

LIMIT and OFFSET

The following example uses the session object's query() method to skip the first 100 records and fetch the following 25:

rs = session.query(Company).limit(25).offset(100)
for instance in rs:
	print("Id: ", instance.Id)
	print("Name: ", instance.Name)
	print("Address: ", instance.Address)
	print("---------")

You can also use the session object's execute() method to set a LIMIT or OFFSET:

rs = session.execute(Company_table.select().limit(25).offset(100))
for instance in rs:

Aggregate Functions

Certain aggregate functions can also be used within SQLAlchemy by using the func module.

To import this module, execute:

from sqlalchemy.sql import func

Once func is imported, the following aggregate functions are available:

COUNT

The following example counts the number of records in a set of groups using the session object's query() method.

rs = session.query(func.count(Company.Id).label("CustomCount"), Company.Name).group_by(Company.Name)
for instance in rs:
	print("Count: ", instance.CustomCount)
	print("Name: ", instance.Name)
	print("---------")

You can also execute COUNT using the session object's execute() method:

rs = session.execute(Company_table.select().with_only_columns([func.count(Company_table.c.Id).label("CustomCount"), Company_table.c.Name])group_by(Company_table.c.Name))
for instance in rs:

SUM

This example calculates the cumulative amount of a numeric column in a set of groups.

rs = session.query(func.sum(Company.STCrAdjPercent).label("CustomSum"), Company.Name).group_by(Company.Name)
for instance in rs:
	print("Sum: ", instance.CustomSum)
	print("Name: ", instance.Name)
	print("---------")

You can also invoke SUM using the session object's execute() method.

rs = session.execute(Company_table.select().with_only_columns([func.sum(Company_table.c.STCrAdjPercent).label("CustomSum"), Company_table.c.Name]).group_by(Company_table.c.Name))
for instance in rs:

AVG

This example uses the session object's query() method to calculate the average amount of a numeric column in a set of groups:

rs = session.query(func.avg(Company.STCrAdjPercent).label("CustomAvg"), Company.Name).group_by(Company.Name)
for instance in rs:
	print("Avg: ", instance.CustomAvg)
	print("Name: ", instance.Name)
	print("---------")

You can also use the session object's execute() method to invoke AVG:

rs = session.execute(Company_table.select().with_only_columns([func.avg(Company_table.c.STCrAdjPercent).label("CustomAvg"), Company_table.c.Name]).group_by(Company_table.c.Name))
for instance in rs:

MAX and MIN

This example finds the maximum value and minimum value of a numeric column in a set of groups.

rs = session.query(func.max(Company.STCrAdjPercent).label("CustomMax"), func.min(Company.STCrAdjPercent).label("CustomMin"), Company.Name).group_by(Company.Name)
for instance in rs:
	print("Max: ", instance.CustomMax)
	print("Min: ", instance.CustomMin)
	print("Name: ", instance.Name)
	print("---------")

You can also use the session object's execute() method to invoke MAX and MIN:

rs = session.execute(Company_table.select().with_only_columns([func.max(Company_table.c.STCrAdjPercent).label("CustomMax"), func.min(Company_table.c.STCrAdjPercent).label("CustomMin"), Company_table.c.Name]).group_by(Company_table.c.Name))
for instance in rs:

From Pandas

When combined with the connector, Pandas can be used to generate data frames that contain your Tally data. Once created, a data frame can be passed to various other Python packages.

Connecting

Pandas relies on an SQLAlchemy engine to execute queries. Before you can use Pandas you must import it:

import pandas as pd
from sqlalchemy import create_engine
engine = create_engine("tally:///?Url='http://localhost:9000'")

Querying Data

In Pandas, SELECT queries are provided in a call to the read_sql() method, alongside a relevant connection object. Pandas executes the query on that connection, and returns the results in the form of a data frame, which can be used for a variety of purposes.

df = pd.read_sql("""
	SELECT
	   Name,
	   Address,
     $exNumericCol;
	FROM Company;""", engine)
print(df)

From Matplotlib

Matplotlib contains a number of tools that can graphically model Tally data after being fed a data frame From Pandas.

Using PyPlot

Before any Matplotlib tool, such as pyplot, can be used, it must be imported:

from matplotlib import pyplot as plt

Once a Pandas data frame is obtained, it can be used to create a plot visualizing Tally data. For example, the following plot generates and displays a bar graph relating Name and STCrAdjPercent values:

df.plot(kind="bar", x="Name", y=["STCrAdjPercent"])
plt.show()

From Petl

The connector can be used to create ETL applications and pipelines for CSV data in Python using Petl.

Install Required Modules

Install the Petl modules using the pip utility.

pip install petl

Connecting

After you import the modules, including the CData Python Connector for Tally, you can use the connector's connect function to create a connection using a valid Tally connection string. If you prefer not to use a direct connection, you can use a SQLAlchemy engine.

import petl as etl
import cdata.tally as mod
cnxn = mod.connect("Url='http://localhost:9000'")

Extract, Transform, and Load the Tally Data

Create a SQL query string and store the query results in a DataFrame.

sql = "SELECT	Name, Address FROM Company "
table1 = etl.fromdb(cnxn,sql)

Loading Data

With the query results stored in a DataFrame, you can load your data into any supported Petl destination. The following example loads the data into a CSV file.

etl.tocsv(table1,'output.csv')

Schema Discovery

The extension supports schema discovery by using SQL queries to available System Tables.

Using SQL

The following sections describe the discovery of metadata through several System Tables:

Tables and Views
Columns
Procedures

Tables and Views

The connector possesses system tables that are used to discover the tables and views available in the data model. Of these system tables, "sys_tables" and "sys_views" are used to fetch information about the available tables and views respectively:

Tables

import cdata.tally as mod
conn = mod.connect("Url='http://localhost:9000'")
cur = conn.cursor()
cmd = "SELECT * FROM sys_tables"
cur.execute(cmd)
rs = cur.fetchall()
for row in rs:
	print(row)

Views

import cdata.tally as mod
conn = mod.connect("Url='http://localhost:9000'")
cur = conn.cursor()
cmd = "SELECT * FROM sys_views"
cur.execute(cmd, params)
rs = cur.fetchall()
for row in rs:
	print(row)

Columns

The available columns for any given table are fetched from a system table called "sys_tablecolumns". A specific table name is provided in the WHERE criteria to restrict the table from which the column information is fetched:

import cdata.tally as mod
conn = mod.connect("Url='http://localhost:9000'")
cur = conn.cursor()
cmd = "SELECT * FROM sys_tablecolumns WHERE TableName = 'Company'"
cur.execute(cmd)
rs = cur.fetchall()
for row in rs:
	print(row)

Procedures

A system table called "sys_procedures" is queried to obtain the available stored procedures that are executed:

import cdata.tally as mod
conn = mod.connect("Url='http://localhost:9000'")
cur = conn.cursor()
cmd = "SELECT * FROM sys_procedures"
cur.execute(cmd)
rs = cur.fetchall()
for row in rs:
	print(row)

Parameters

The input parameters of any stored procedure are similarly obtained from the "sys_procedureparameters" system table:

import cdata.tally as mod
conn = mod.connect("Url='http://localhost:9000'")
cur = conn.cursor()
cmd = "SELECT * FROM sys_procedureparameters WHERE ProcedureName = 'CreateSchema'"
cur.execute(cmd)
rs = cur.fetchall()
for row in rs:
	print(row)

Advanced Features

This section details a selection of advanced features of the Tally connector.

User Defined Views

The connector supports the use of user defined views, virtual tables whose contents are decided by a pre-configured user defined query. These views are useful when you cannot directly control queries being issued to the drivers. For an overview of creating and configuring custom views, see User Defined Views .

SSL Configuration

Use SSL Configuration to adjust how connector handles TLS/SSL certificate negotiations. You can choose from various certificate formats;. For further information, see the SSLServerCert property under "Connection String Options" .

Firewall and Proxy

Configure the connector for compliance with Firewall and Proxy, including Windows proxies and HTTP proxies. You can also set up tunnel connections.

Caching Data

Caching Data enables faster access to data and reduces the number of API calls, improving performance. The connector supports a simple caching model where multiple connections can also share the cache over time. When configuring the cache connection, you can specify automatic or explicit data caching.

Query Processing

The connector offloads as much of the SELECT statement processing as possible to Tally and then processes the rest of the query in memory (client-side).

For further information, see Query Processing.

Logging

For an overview of configuration settings that can be used to refine CData logging, see Logging. Only two connection properties are required for basic logging, but there are numerous features that support more refined logging, which enables you to use the LogModules connection property to specify subsets of information to be logged.

Exception Handling

For an overview of how exceptions are reported and the components of an exception, see Exception Handling.

User Defined Views

The CData Python Connector for Tally supports the use of user defined views: user-defined virtual tables whose contents are decided by a preconfigured query. User defined views are useful in situations where you cannot directly control the query being issued to the driver; for example, when using the driver from a tool.

Use a user defined view to define predicates that are always applied. If you specify additional predicates in the query to the view, they are combined with the query already defined as part of the view.

There are two ways to create user defined views:

Create a JSON-formatted configuration file defining the views you want.
DDL statements.

Defining Views Using a Configuration File

User defined views are defined in a JSON-formatted configuration file called UserDefinedViews.json. The connector automatically detects the views specified in this file.

You can also have multiple view definitions and control them using the UserDefinedViews connection property. When you use this property, only the specified views are seen by the connector.

This user defined view configuration file is formatted so that each root element defines the name of a view, and includes a child element, called query, which contains the custom SQL query for the view.

For example:

{
	"MyView": {
		"query": "SELECT * FROM Company WHERE MyColumn = 'value'"
	},
	"MyView2": {
		"query": "SELECT * FROM MyTable WHERE Id IN (1,2,3)"
	}
}

Use the UserDefinedViews connection property to specify the location of your JSON configuration file. For example:

"UserDefinedViews", "C:\\Users\\yourusername\\Desktop\\tmp\\UserDefinedViews.json"

Defining Views Using DDL Statements

The connector is also capable of creating and altering the schema via DDL Statements such as CREATE LOCAL VIEW, ALTER LOCAL VIEW, and DROP LOCAL VIEW.

Create a View

To create a new view using DDL statements, provide the view name and query as follows:

CREATE LOCAL VIEW [MyViewName] AS SELECT * FROM Customers LIMIT 20;

If no JSON file exists, the above code creates one. The view is then created in the JSON configuration file and is now discoverable. The JSON file location is specified by the UserDefinedViews connection property.

Alter a View

To alter an existing view, provide the name of an existing view alongside the new query you would like to use instead:

ALTER LOCAL VIEW [MyViewName] AS SELECT * FROM Customers WHERE TimeModified > '3/1/2020';

The view is then updated in the JSON configuration file.

Drop a View

To drop an existing view, provide the name of an existing schema alongside the new query you would like to use instead.

DROP LOCAL VIEW [MyViewName]

This removes the view from the JSON configuration file. It can no longer be queried.

Schema for User Defined Views

In order to avoid a view's name clashing with an actual entity in the data model, user defined views are exposed in the UserViews schema by default. To change the name of the schema used for UserViews, reset the UserViewsSchemaName property.

Working with User Defined Views

For example, a SQL statement with a user defined view called UserViews.RCustomers only lists customers in Raleigh:

SELECT * FROM Customers WHERE City = 'Raleigh';

An example of a query to the driver:

SELECT * FROM UserViews.RCustomers WHERE Status = 'Active';

Resulting in the effective query to the source:

SELECT * FROM Customers WHERE City = 'Raleigh' AND Status = 'Active';

That is a very simple example of a query to a user defined view that is effectively a combination of the view query and the view definition. It is possible to compose these queries in much more complex patterns. All SQL operations are allowed in both queries and are combined when appropriate.

SSL Configuration

Customizing the SSL Configuration

To enable TLS, set the URL connection property to the URL of the Tally instance prepended with https://. For example, http://(hostname or server ip):9000.

With this configuration, the connector attempts to negotiate TLS with the server. The server certificate is validated against the default system trusted certificate store. You can override how the certificate gets validated using the SSLServerCert connection property.

To specify another certificate, see the SSLServerCert connection property.

Firewall and Proxy

Connecting Through a Firewall or Proxy

HTTP Proxies

Note: The connector uses the system proxy settings by default, without further configuration needed. If you want to connect to other proxies, set ProxyAutoDetect to False and read further.

To authenticate to an HTTP proxy, set the following:

ProxyServer: the hostname or IP address of the proxy server that you want to route HTTP traffic through.
ProxyPort: the TCP port that the proxy server is running on.
ProxyAuthScheme: the authentication method the connector uses when authenticating to the proxy server.
ProxyUser: the username of a user account registered with the proxy server.
ProxyPassword: the password associated with the ProxyUser.

Other Proxies

Set the following properties:

To use a proxy-based firewall, set FirewallType, FirewallServer, and FirewallPort.
To tunnel the connection, set FirewallType to TUNNEL.
To authenticate, specify FirewallUser and FirewallPassword.
To authenticate to a SOCKS proxy, additionally set FirewallType to SOCKS5.

Caching Data

Caching data provides several benefits, including faster access to data and reducing the number of API calls, which improve performance. The connector supports a simple caching model where multiple connections can also share the cache over time. You can enable and configure caching features by setting the necessary connection properties.

Configuring the Cache Connection

Configuring the Caching Database

This section describes the properties for caching data to the persistent store of your choice.

CacheLocation

The CacheLocation property species the path to a file-system-based database. When caching is enabled, a file-system-based database is used by default. If CacheLocation is not specified, this database is stored at the path in Location. If neither of these connection properties are specified, the connector uses a platform-dependent default location.

CacheConnection

The CacheConnection property specifies a database driver and the connection string to the caching database.

CacheDriver and CacheProvider

Both the CacheDriver and CacheProvider properties are supported. Each specifies a database driver and the connection string to the caching database. CacheDriver is designed for Linux and MacOS; CacheProvider is Windows-based.

Automatically Caching Data

Automatically caching data is useful when you do not want to rebuild the cache for each query. When you query data for the first time, the connector automatically initializes and builds a cache in the background. When AutoCache = true, the connector uses the cache for subsequent query executions, resulting in faster response times.

Configuring Automatic Caching

Caching the Company Table

The following example caches the Company table in the file specified by the CacheLocation property of the connection string.

SELECT Name, Address FROM Company WHERE CompanyNumber = '1000'

Common Use Case

A common use for automatically caching data is to improve driver performance when making repeated requests to a live data source, such as building a report or creating a visualization. With auto caching enabled, repeated requests to the same data may be executed in a short period of time, but within an allowable tolerance (CacheTolerance) of what is considered "live" data.

Explicitly Caching Data

With explicit caching (AutoCache = false), you decide exactly what data is cached and when to query the cache instead of the live data. Explicit caching gives you full control over the cache contents by using CACHE Statements. This section describes some strategies to use the caching features offered by the connector.

Creating the Cache

To load data in the cache, issue the following statement.

CACHE SELECT * FROM tableName WHERE ...

Once the statement is issued, any matching data in tableName is loaded into the corresponding table.

Updating the Cache

This section describes two ways to update the cache.

Updating with the SELECT Statement

The following example shows a statement that can update modified rows and add missing rows in the cached table. However, this statement does not delete extra rows that are already in the cache. This statement only merges the new rows or updates the existing rows.

CACHE SELECT * FROM Company WHERE CompanyNumber = '1000'

Updating with the TRUNCATE Statement

The following example shows a statement that can update modified rows and add missing rows in the cached table. This statement can also delete rows in the cache table that are not present in the live data source.

  CACHE WITH TRUNCATE SELECT * FROM Company WHERE CompanyNumber = '1000'

Query the Data in Online or Offline Mode

This section describes how to query the data in online or offline mode.

Online: Select Cached Tables

You can use the tableName#CACHE syntax to explicitly execute queries to the cache while still online, as shown in the following example.

SELECT * FROM Company#CACHE

Offline: Select Cached Tables

With Offline = true, SELECT statements always execute against the local cache database, regardless of whether you explicitly specify the cached table or not. Modification of the cache is disabled in Offline mode to prevent accidentally updating only the cached data. Executing a DELETE/UPDATE/INSERT statement while in Offline mode results in an exception.

The following example selects from the local cache but not the live data source because Offline = true.

SELECT * FROM Company WHERE CompanyNumber='1000' ORDER BY Address ASC

Delete Data from the Cache

You can delete data from the cache by building a direct connection to the database. Note that the connector does not support manually deleting data from the cache.

Common Use Case

A common use for caching is to have an application always query the cached data and only update the cache at set intervals, such as once every day or every two hours. There are two ways in which this can be implemented:

AutoCache = false and Offline = false. All queries issued by the application explicitly reference the tableName#CACHE table. When the cache needs to be updated, the application executes a tableName#CACHE ... statement to bring the cached data up to date.
Offline = true. Caching is transparent to the application. All queries are executed against the table as normal, so most application code does not need to be aware that caching is done. To update the cached data, simply create a separate connection with Offline = false and execute a tableName#CACHE ... statement.

Data Type Mapping

The connector maps types from the data source to the corresponding data type available in the chosen cache database. The following table shows the mappings between the data types configured in the schema and the data types in the database. Some schema types have synonyms which are all listed in the Schema column.

Data Type Mapping

Note: String columns can map to different data types depending on their length.


Schema	.NET	JDBC	SQL Server	Derby	MySQL	Oracle	SQLite	Access
int, integer, int32	Int32	int	int	INTEGER	INT	NUMBER	integer	LONG
smallint, short, int16	Int16	short	smallint	SMALLINT	SMALLINT	NUMBER	integer	SHORT
double, float, real	Double	double	float	DOUBLE	DOUBLE	NUMBER	double	DOUBLE
date	DateTime	java.sql.Date	date	DATE	DATE	DATE	date	DATETIME
datetime, timestamp	DateTime	java.sql.Date	datetime	TIMESTAMP	DATETIME	TIMESTAMP	datetime	DATETIME
time, timespan	TimeSpan	java.sql.Time	time	TIME	TIME	TIMESTAMP	datetime	DATETIME
string, varchar	String	java.lang.String	If length > 4000: nvarchar(max), Otherwise: nvarchar(length)	If length > 32672: LONG VARCHAR, Otherwise VARCHAR(length)	If length > 255: LONGTEXT, Otherwise: VARCHAR(length)	If length > 4000: CLOB, Otherwise: VARCHAR2(length)	nvarchar(length)	If length > 255: LONGTEXT, Otherwise: VARCHAR(length)
long, int64, bigint	Int64	long	bigint	BIGINT	BIGINT	NUMBER	bigint	LONG
boolean, bool	Boolean	boolean	tinyint	SMALLINT	BIT	NUMBER	tinyint	BIT
decimal, numeric	Decimal	java.math.BigDecimal	decimal	DECIMAL	DECIMAL	DECIMAL	decimal	CURRENCY
uuid	Guid	java.util.UUID	nvarchar(length)	VARCHAR(length)	VARCHAR(length)	VARCHAR2(length)	nvarchar(length)	VARCHAR(length)
binary, varbinary, longvarbinary	byte[]	byte[]	binary(1000) or varbinary(max) after SQL Server 2000, image otherwise	BLOB	LONGBLOB	BLOB	BLOB	LONGBINARY

Query Processing

CData has a client-side SQL engine built into the connector library. This enables support for the full capabilities that SQL-92 offers, including filters, aggregations, functions, etc.

For sources that do not support SQL-92, the connector offloads as much of SQL statement processing as possible to Tally and then processes the rest of the query in memory (client-side). This results in optimal performance.

For data sources with limited query capabilities, the connector handles transformations of the SQL query to make it simpler for the connector. The goal is to make smart decisions based on the query capabilities of the data source to push down as much of the computation as possible. The Tally Query Evaluation component examines SQL queries and returns information indicating what parts of the query the connector is not capable of executing natively.

The Tally Query Slicer component is used in more specific cases to separate a single query into multiple independent queries. The client-side Query Engine makes decisions about simplifying queries, breaking queries into multiple queries, and pushing down or computing aggregations on the client-side while minimizing the size of the result set.

There's a significant trade-off in evaluating queries, even partially, client-side. There are always queries that are impossible to execute efficiently in this model, and some can be particularly expensive to compute in this manner. CData always pushes down as much of the query as is feasible for the data source to generate the most efficient query possible and provide the most flexible query capabilities.

More Information

For a full discussion of how CData handles query processing, see CData Architecture: Query Execution.

Logging

Capturing connector logging can be very helpful when diagnosing error messages or other unexpected behavior.

Basic Logging

To begin capturing connector logging, set these properties:

Logfile: A filepath that designates the name and location of the log file.
Verbosity: A numerical value (1-5) that determines the amount of detail in the log. See the page in the Connection Properties section for an explanation of the five levels.
MaxLogFileSize: When the limit is hit, a new log is created in the same folder with the date and time appended to the end. The default limit is 100 MB. Values lower than 100 kB will use 100 kB as the value instead.
MaxLogFileCount: A string specifying the maximum file count of log files. When the limit is hit, a new log is created in the same folder with the date and time appended to the end and the oldest log file will be deleted. Minimum supported value is 2. A value of 0 or a negative value indicates no limit on the count.

Once these properties are set, the connector populates the log file as it carries out various tasks, such as when authentication is performed or queries are executed. If the specified file doesn't already exist, it is created.

Log Verbosity

The verbosity level determines the amount of detail that the connector reports to the Logfile. Supported Verbosity levels range from 1 to 5.

The following list describes each level:


1	Setting Verbosity to 1 logs the query, the number of rows returned by it, the start of execution and the time taken, and any errors.
2	Setting Verbosity to 2 logs everything included in Verbosity 1, cache queries, and additional information about the request.
3	Setting Verbosity to 3 also logs HTTP headers, as well as the body of the request and the response.
4	Setting Verbosity to 4 also logs transport-level communication with the data source. This includes SSL negotiation.
5	Setting Verbosity to 5 also logs communication with the data source and additional details that may be helpful in troubleshooting problems. This includes interface commands.

For normal operations, Verbosity should not be set to greater than 1. At higher verbosities you can log substantial amounts of data, which can delay execution times.

To refine the logged content further by showing/hiding specific categories of information, see LogModules.

Sensitive Data

Verbosity levels of 3 and higher may capture information that you do not want shared outside of your organization. The following lists information of concern for each level:

Verbosity 3: The full body of the request and the response, which includes all the data returned by the connector
Verbosity 4: SSL certificates
Verbosity 5: Any extra transfer data not included at Verbosity 3, such as non human-readable binary transfer data

Note: Although we mask sensitive values, such as passwords, in the connection string and any request in the log, it is always best practice to review the logs for any sensitive information before sharing outside your organization.

Advanced Logging

You may want to refine the exact information that is recorded to the log file. This can be accomplished using the LogModules property. This property allows you to filter the logging using a semicolon-separated list of logging modules.

Example property value:

LogModules=INFO;EXEC;SSL;SQL;META;

Note that the logfile filtering triggered by the Verbosity connection property takes precedence over the filtering imposed by this connection property. This means that operations of a higher verbosity level than the level specified in the Verbosity connection property are not printed in the logfile, even if they belong to one of the modules specified in this connection property.

The available modules and submodules are:


Module Name	Module Description	Submodules
INFO	General Information. Includes the connection string, product version (build number), and initial connection messages.	Connec – Information related to creating or destroying connections. Messag – Generic label for messages pertaining to connections, the connection string, and product version. These messages are typically specific to the connector, rather than being received and passed along directly from the service.
EXEC	Query Execution. Includes execution messages for user-written SQL queries, parsed SQL queries, and normalized SQL queries. Success/failure messages for queries and query pages appear here as well.	Messag – Messages pertaining to query execution. These messages are typically specific to the connector, rather than being received and passed along directly from the service. Normlz – Query normalization steps. Query normalization is when the product takes the user-submitted query and rewrites the query to get the same results with optimal performance. Origin – This label applies to any messages recording a user's original query (the exact, unaltered, non-normalized query executed by the user). Page – Messages related to query paging. Parsed – Query parsing steps. Parsing is the process of converting the user-submitted query into a standardized format for easier processing.
HTTP	HTTP protocol messages. Includes HTTP requests/responses (including POST messages), as well as Kerberos related messages.	KERB – HTTP requests related to Kerberos. Messag – Messages pertaining to HTTP protocols. These messages are typically specific to the connector, rather than being received and passed along directly from the service. Unpack – This label applies to messages about zipped data being returned from the service API and unpacked by the product. Res – Messages containing HTTP responses. Req – Messages containing HTTP requests.
WSDL	Messages pertaining to the generation of WSDL/XSD files.	—
SSL	SSL certificate messages.	Certif – Messages pertaining to SSL certificates.
AUTH	Authentication related failure/success messages.	Messag – Messages pertaining to authentication. These messages are typically specific to the connector, rather than being received and passed along directly from the service. OAuth – Messages related to OAuth authentication. Krbros – Kerberos-related authentication messages.
SQL	Includes SQL transactions, SQL bulk transfer messages, and SQL result set messages.	Bulk – Messages pertaining to bulk query execution. Cache – Messages related to reading row data from and writing row data to the product's cache for better performance. Messag – Messages pertaining to SQL transactions. These messages are typically specific to the connector, rather than being received and passed along directly from the service. ResSet – Query resultsets. Transc – Messages related to handling transactions, including information about the number of jobs executed and backup table handling.
META	Metadata cache and schema messages.	Cache – Messages related to reading from and modifying column and table definitions in the product's cache for better performance. Schema – Messages related to retrieving metadata from or modifying the service schema. MemSto – Messages related to writing to or reading from in-memory metadata cache. Storag – Messages relating to storing metadata on disk or in an external data store, rather than in memory.
FUNC	Information related to executing SQL functions.	Errmsg – Error messages related to executing SQL functions.
TCP	Incoming and outgoing raw bytes on TCP transport layer messages.	Send – Raw data sent via the TCP protocol. Receiv – Raw data received via the TCP protocol.
FTP	Messages pertaining to the File Transfer Protocol.	Info – Status messages related to communication in the FTP protocol. Client – Messages related to actions taken by the FTP client (the product) during FTP communication. Server – Messages related to actions taken by the FTP server during FTP communication.
SFTP	Messages pertaining to the Secure File Transfer Protocol.	Info – Status messages related to communication in the SFTP protocol. To_Server – Messages related to actions taken by the SFTP client (the product) during SFTP communication. From_Server – Messages related to actions taken by the SFTP server during SFTP communication.
POP	Messages pertaining to data transferred via the Post Office Protocol.	Client – Messages related to actions taken by the POP client (the product) during POP communication. Server – Messages related to actions taken by the POP server during POP communication. Status – Status messages related to communication in the POP protocol.
SMTP	Messages pertaining to data transferred via the Simple Mail Transfer Protocol.	Client – Messages related to actions taken by the SMTP client (the product) during SMTP communication. Server – Messages related to actions taken by the SMTP server during SMTP communication. Status – Status messages related to communication in the SMTP protocol.
CORE	Messages relating to various internal product operations not covered by other modules.	—
DEMN	Messages related to SQL remoting.	—
CLJB	Messages about bulk data uploads (cloud job).	Commit – Submissions for bulk data uploads.
SRCE	Miscellaneous messages produced by the product that don't belong in any other module.	—
TRANCE	Advanced messages concerning low-level product operations.	—

Exception Handling

Exceptions can be surfaced from either the API or the CData Python Connector for Tally. Each exception will have an error code, an error message, and a SQL state.

Error Codes

The error code classifies the type of error.


0	NONE	Used for unclassified errors and internally handled errors. This code also covers data source-specific errors that do not fit in any specific category.
65537	TCP_UNKNOWN_HOST	Unable to resolve a hostname (DNS failure).
65538	TCP_CONNECTION_REFUSED	Could not connect to the remote port.
65539	TCP_AUTH_FAILED	Login failed when using a binary authentication protocol. Use this for auth errors when the protocol is not HTTP (LDAP, SASL, Kerberos, ...).
65540	TCP_TIMEOUT	Did not receive a response after sending a request to the server.
65541	TCP_PROTOCOL	For wire protocol drivers. Either the server sent a bad packet that we are unable to process, or we cannot construct a packet to send.
131073	TLS_SERVER_UNTRUSTED	Could not verify SSL server certificate.
131074	TLS_CLIENT_UNTRUSTED	Server did not accept the client certificate we sent.
196609	OAUTH_DECRYPT_FAILED	OAuthEncryptKey did not decrypt the OAuthSettings file.
196610	OAUTH_MISSING_CLIENT_INFO	OAuthClientId / OAuthClientSecret / OAuthJWTCert is missing.
196611	OAUTH_MISSING_PROP	General OAuth property missing. OAUTH_MISSING_CLIENT_INFO is used for missing client ID/secret and JWT cert.
196612	OAUTH_NO_ACCESS_TOKEN	Unable to retrieve access token. Only use this when getting a token in GetOAuthAccessToken / RefreshOAuthAccessToken.
196613	OAUTH_TOKEN_EXPIRED	The access token expired. Normally used with a RefreshOAuth/OAuthException behavior.
196614	OAUTH_INVALID_PROP	OAuth property has an invalid value. OAUTH_MISSING_CLIENT_INFO / OAUTH_MISSING_PROP is used if the value is not set.
262145	HTTP_REQUEST_TIMEOUT	Did not receive a response from the HTTP server.
262146	HTTP_CLIENT_ERROR	Generic HTTP 4xx error. Only use for 4xx errors not covered by other codes.
262147	HTTP_AUTH_FAILED	HTTP 401 error.
262148	HTTP_LIMIT_EXCEEDED	HTTP 429 error.
262149	HTTP_SERVER_ERROR	HTTP 5xx error.
262150	HTTP_NOT_FOUND_ERROR	HTTP 404 error.
327681	CORE_TIMEOUT	General timeout. Not related to a specific network request.
327682	CORE_OP_NOT_ALLOWED	Operation blocked by provider permissions.
327683	CORE_CONNECTION_CONFIG	Connection configuration is not valid.
327684	CORE_SERIALIZE	Failed to encode data into a specific format (XML, JSON, CSV, ...).
327685	CORE_DESERIALIZE	Failed to decode data from a specific format (XML, JSON, CSV, ...).
393217	SQL_SYNTAX_ERROR	Unable to parse a SQL query.
393218	SQL_MISSING_COLUMNS	Query did not include required columns.
393219	SQL_MISSING_PARAMS	Stored procedure call did not include required parameters.
393220	SQL_QUERY_NOT_SUPPORTED	A part of the query is not allowed in the current context.
458753	SSH_SERVER_UNTRUSTED	Could not verify SSH server.
524289	STORAGE_LIST_EXCEPTION	Issue listing storage resources.
524290	STORAGE_RESOURCE_NOT_FOUND	Issue finding storage resources.
524291	STORAGE_ROOT_RESOURCE_NOT_FOUND	The root resource (bucket/share/drive) was not found; cannot create it in flat file drivers.
524292	STORAGE_RESOURCE_NOT_A_DIRECTORY	Storage resource is not a directory.
524293	STORAGE_RESOURCE_NOT_A_FILE	Storage resource is not a file.
524294	STORAGE_PERMISSIONS_DENIED	Storage permissions denied.

SQL State

The SQL state is used when throwing generic provider errors to the wrapper and indicates the success or failure of a call.

Some of the common SQL states are listed below:


07007	REQUIRED_CLAUSE	Class Code 07: Dynamic SQL Error.
08001	OPEN_CONNECTION	Class Code 08: Connection Exception. The connection was unable to be established to the application server or other server.
08004	REJECT_CONNECTION	The application server rejected establishment of the connection.
42501	PRIVILEGE_IDENTIFIED_OBJECT	Class Code 42: Syntax Error or Access Rule Violation. The authorization ID does not have the privilege to perform the specified operation on the identified object.
42506	AUTH_FAILED	Owner authorization failure occurred.
42601	SQL_SYNTAX	A character, token, or clause is invalid or missing.

Error Message

The error message provides more detailed reasoning about why the error occurred. It provides an explanation of the issue, and may include steps on how to resolve it.

SQL Compliance

SELECT Statements

See SELECT Statements for a syntax reference and examples.

See Data Model for information on the capabilities of the Tally API.

CACHE Statements

CACHE statements allow granular control over the connector's caching functionality. For a syntax reference and examples, see CACHE Statements.

For more information on the caching feature, see Caching Data.

EXECUTE Statements

Use EXECUTE or EXEC statements to execute stored procedures. See EXECUTE Statements for a syntax reference and examples.

Names and Quoting

Table and column names are considered identifier names; as such, they are restricted to the following characters: [A-Z, a-z, 0-9, _:@].
To use a table or column name with characters not listed above, the name must be quoted using square brackets ([name]) in any SQL statement.
Parameter names can optionally start with the @ symbol (e.g., @p1 or @CustomerName) and cannot be quoted.
Strings must be quoted using single quotes (e.g., 'John Doe').

SQL Functions

The connector provides functions that are similar to those that are available with most standard databases. These functions are implemented in the CData provider engine and thus are available across all data sources with the same consistent API. Three categories of functions are available: string, date, and math.

The connector interprets all SQL function inputs as either strings or column identifiers, so you need to escape all literals as strings, with single quotes. For example, contrast the SQL Server syntax and connector syntax for the DATENAME function:

SQL Server:
```
SELECT DATENAME(yy,GETDATE())
```
connector:
```
SELECT DATENAME('yy',GETDATE())
```

String Functions

These functions perform string manipulations and return a string value. See STRING Functions for more details.

Date Functions

These functions perform date and date time manipulations. See DATE Functions for more details.

Math Functions

These functions provide mathematical operations. See MATH Functions for more details.

STRING Functions

ASCII(character_expression)

Returns the ASCII code value of the left-most character of the character expression.

character_expression: The character expression.

                      SELECT ASCII('0');
                      --  Result: 48

BASE64_ENCODE(input_binary)

Returns the Base64-encoded string form of a binary input.

input_binary: The binary value to encode.

                        SELECT BASE64_ENCODE(BinaryData);
                    -- Result: 'QmFzZTY0RW5jb2RlZA=='

BASE64_DECODE(input_string)

Returns the binary result of decoding a Base64-encoded string.

input_string: The Base64-encoded string.

                        SELECT BASE64_DECODE('QmFzZTY0RW5jb2RlZA==');
                    -- Result: (binary output)

CHAR(integer_expression)

Converts the integer ASCII code to the corresponding character.

integer_expression: The integer from 0 through 255.

                      SELECT CHAR(48);
                      -- Result: '0'

CHARINDEX(expressionToFind ,expressionToSearch [,start_location ])

Returns the starting position of the specified expression in the character string.

expressionToFind: The character expression to find.
expressionToSearch: The character expression, typically a column, to search.
start_location: An optional character position to start searching for expressionToFind in expressionToSearch.

                      SELECT CHARINDEX('456', '0123456');
                      -- Result: 4

                      SELECT CHARINDEX('456', '0123456', 5);
                      -- Result: -1

CHAR_LENGTH(character_expression),

Returns the number of UTF-8 characters present in the expression.

character_expression: The set of characters to be evaluated for length.

				 SELECT CHAR_LENGTH('sample text') FROM Account LIMIT 1
				 -- Result: 11

CONCAT(string_value1, string_value2, ..., string_valueN)

Returns the string that is the concatenation of two or more string values.

string_value1: The first string to be concatenated.
string_value2: The second string to be concatenated.
string_valueN: (optional) Any additional strings to be concatenated.

                      SELECT CONCAT('Hello, ', 'world!');
                      -- Result: 'Hello, world!'

CONTAINS(expressionToSearch, expressionToFind)

Returns 1 if expressionToFind is found within expressionToSearch; otherwise, 0.

expressionToSearch: The character expression, typically a column, to search.
expressionToFind: The character expression to find.

                      SELECT CONTAINS('0123456', '456');
                      -- Result: 1

                      SELECT CONTAINS('0123456', 'Not a number');
                      -- Result: 0

ENDSWITH(character_expression, character_suffix)

Returns 1 if character_expression ends with character_suffix; otherwise, 0.

character_expression: The character expression.
character_suffix: The character suffix to search for.

                      SELECT ENDSWITH('0123456', '456');
                      -- Result: 1

                      SELECT ENDSWITH('0123456', '012');
                      -- Result: 0

FILESIZE(uri)

Returns the number of bytes present in the file at the specified file path.

uri: The path of the file from which to read the size.

				SELECT FILESIZE('C:/Users/User1/Desktop/myfile.txt');
				-- Result: 23684

FORMAT(value [, parseFormat], format )

Returns the value formatted with the specified format.

value: The string to format.
format: The string specifying the output syntax of the date or numeric format.
parseFormat: The string specifying the input syntax of the date value. Not applicable to numeric types.

                      SELECT FORMAT(12.34, '#');
                      -- Result: 12

                      SELECT FORMAT(12.34, '#.###');
                      -- Result: 12.34

                      SELECT FORMAT(1234, '0.000E0');
                      -- Result: 1.234E3
                      
                      SELECT FORMAT('2019/01/01', 'yyyy-MM-dd');
                      -- Result: 2019-01-01
                      
                      SELECT FORMAT('20190101', 'yyyyMMdd', 'yyyy-MM-dd');
                      -- Result: '2019-01-01'

HASHBYTES(algorithm, value)

Returns the hash of the input value as a byte array using the given algorithm. The supported algorithms are MD5, SHA1, SHA2_256, SHA2_512, SHA3_224, SHA3_256, SHA3_384, and SHA3_512.

algorithm: The algorithm to use for hashing. Must be one of MD5, SHA1, SHA2_256, SHA2_512, SHA3_224, SHA3_256, SHA3_384, or SHA3_512.
value: The value to hash. Must be either a string or byte array.

                      SELECT HASHBYTES('MD5', 'Test');
                      -- Result (byte array): 0x0CBC6611F5540BD0809A388DC95A615B

INDEXOF(expressionToSearch, expressionToFind [,start_location ])

Returns the starting position of the specified expression in the character string.

expressionToSearch: The character expression, typically a column, to search.
expressionToFind: The character expression to find.
start_location: An optional character position to start searching for expressionToFind in expressionToSearch.

                      SELECT INDEXOF('0123456', '456');
                      -- Result: 4

                      SELECT INDEXOF('0123456', '456', 5);
                      -- Result: -1

ISALPHABETIC(character_expression)

Returns 1 if the character expression consists only of alphabetic characters; otherwise, 0.

character_expression: The string expression to evaluate.

                      SELECT ISALPHABETIC('Hello');
                      -- Result: 1

                      SELECT ISALPHABETIC('Hello123');
                      -- Result: 0

                      SELECT ISALPHABETIC('Hello!');
                      -- Result: 0

ISALPHANUMERIC(character_expression)

Returns 1 if the character expression consists only of alphabetic and numeric characters; otherwise, 0.

character_expression: The string expression to evaluate.

                      SELECT ISALPHANUMERIC('Hello123');
                      -- Result: 1

                      SELECT ISALPHANUMERIC('123');
                      -- Result: 1

                      SELECT ISALPHANUMERIC('Hello.123');
                      -- Result: 0

ISNUMERIC(character_expression)

Returns 1 if the character expression consists only of numeric digits and up to one decimal point; otherwise, 0.

character_expression: The string expression to evaluate.

                      SELECT ISNUMERIC('123');
                      -- Result: 1

                      SELECT ISNUMERIC('123.45');
                      -- Result: 1

                      SELECT ISNUMERIC('123.45.67');
                      -- Result: 0

                      SELECT ISNUMERIC('12a3');
                      -- Result: 0

JSON_EXTRACT(json, jsonpath)

Selects any value in a JSON array or object. The path to the array is specified in the jsonpath argument. Return value is numeric or null.

json: The JSON document to extract.
jsonpath: The XPath used to select the nodes. The JSONPath must be a string constant. The values of the nodes selected will be returned in a token-separated list.

                      SELECT JSON_EXTRACT('{"test": {"data": 1}}', '$.test');
                      -- Result: '{"data":1}'

                      SELECT JSON_EXTRACT('{"test": {"data": 1}}', '$.test.data');
                      -- Result: 1

                      SELECT JSON_EXTRACT('{"test": {"data": [1, 2, 3]}}', '$.test.data[1]');
                      -- Result: 2

LEFT ( character_expression , integer_expression )

Returns the specified number of characters counting from the left of the specified string.

character_expression: The character expression.
integer_expression: The positive integer that specifies how many characters will be returned counting from the left of character_expression.

                      SELECT LEFT('1234567890', 3);
                      -- Result: '123'

LEN(string_expression)

Returns the number of characters of the specified string expression.

string_expression: The string expression.

                      SELECT LEN('12345');
                      -- Result: 5

LOCATE(substring,string)

Returns an integer representing how many characters into the string the substring appears.

substring: The substring to find inside larger string.
string: The larger string that is searched for the substring.
start locations: An optional integer that sets the character position (offset) from which to start searching.

				SELECT LOCATE('sample','XXXXXsampleXXXXX');
				-- Result: 6

                SELECT LOCATE('sample', 'XXXXXsampleXXXXX', 7)
                -- Result: 0

LOWER ( character_expression )

Returns the character expression with the uppercase character data converted to lowercase.

character_expression: The character expression.

                      SELECT LOWER('MIXED case');
                      -- Result: 'mixed case'

LTRIM(character_expression)

Returns the character expression with leading blanks removed.

character_expression: The character expression.

                      SELECT LTRIM('     trimmed');
                      -- Result: 'trimmed'

MASK(string_expression, mask_character [, start_index [, end_index ]])

Replaces the characters between start_index and end_index with the mask_character within the string.

string_expression: The string expression to be searched.
mask_character: The character to mask with.
start_index: The optional number of characters to leave unmasked at beginning of string. Defaults to 0.
end_index: The optional number of characters to leave unmasked at end of string. Defaults to 0.

                        SELECT MASK('1234567890','*',);
                        -- Result: '**********'
                        SELECT MASK('1234567890','*', 4);
                        -- Result: '1234******'
                        SELECT MASK('1234567890','*', 4, 2);
                        -- Result: '1234****90'

NCHAR(integer_expression)

Returns the Unicode character with the specified integer code as defined by the Unicode standard.

integer_expression: The integer from 0 through 65535 (0 through xFFFF).

OCTET_LENGTH(character_expression),

Returns the number of bytes present in the expression.

character_expression: The set of characters to be be evaluated.

				 SELECT OCTET_LENGTH('text') FROM Account LIMIT 1
				 -- Result: 4

PATINDEX(pattern, expression)

Returns the starting position of the first occurrence of the pattern in the expression. Returns 0 if the pattern is not found.

pattern: The character expression that contains the sequence to be found. The wild-card character % can be used only at the start or end of the expression.
expression: The expression, typically a column, to search for the pattern.

                      SELECT PATINDEX('123%', '1234567890');
                      -- Result: 1

                      SELECT PATINDEX('%890', '1234567890');
                      -- Result: 8

                      SELECT PATINDEX('%456%', '1234567890');
                      -- Result: 4

POSITION(expressionToFind IN expressionToSearch)

Returns the starting position of the specified expression in the character string.

expressionToFind: The character expression to find.
expressionToSearch: The character expression, typically a column, to search.

                      SELECT POSITION('456' IN '123456');
                      -- Result: 4

                      SELECT POSITION('x' IN '123456');
                      -- Result: 0

QUOTENAME(character_string [, quote_character])

Returns a valid SQL Server-delimited identifier by adding the necessary delimiters to the specified Unicode string.

character_string: The string of Unicode character data. The string is limited to 128 characters. Inputs greater than 128 characters return null.
quote_character: An optional single character to be used as the delimiter. These include:
- a single quotation mark (')
- a left or right bracket ([])
- a double quotation mark (")
- a left or right parenthesis ( () )
- a greater or less than sign (><)
- a left or right brace ({})
- a backtick (`)
If quote_character is not specified brackets are used. If an unacceptable character is supplied, it returns NULL.

                      SELECT QUOTENAME('table_name');
                      -- Result: '[table_name]'

                      SELECT QUOTENAME('table_name', '"');
                      -- Result: '"table_name"'

                      SELECT QUOTENAME('table_name', '[');
                      -- Result: '[table_name]'

REGEXP_REPLACE(expr, pattern [, replacement [, position [, occurrence [, match_type]]]])

Replaces occurrences of a regular expression pattern in the input string with a specified value and returns the resulting string.

expr: The string expression to be searched.
pattern: The regular expression pattern to match.
replacement: (optional) The string to replace each matched occurrence of pattern with. Supports backreferences \1 through \9 and escape sequences \n, \r, \t, and \\. By default, this argument is an empty string, meaning matched portions are removed from the output string.
position: (optional) The 1-based starting position used when searching for regular expression matches in expr. The default is 1. All characters prior to the starting position are included in the output string unaltered. Skipped characters are ignored when calculating regular expression matches, even if they match pattern.
occurrence: (optional) Specifies whether all occurrences of pattern,, or only a specific occurrence of pattern are replaced. The default is 0, which means all occurrences of pattern are replaced with replacement. Set to 1 to only replace the first instance of the pattern; 2 to replace the second; etc.
match_type: (optional) Modifiers used to customize matching behavior. Supported values are: 'c' (case-sensitive, default), 'i' (case-insensitive), 'm' (multiline), 'n' (dot matches newline), 'x' (extended mode). These can be freely combined by including the letters back to back. For example, 'im' applies the functionality of both 'i' and 'm'. The regular expression syntax used is that of the Extended mode ('x') ignores whitespace and allows inline comments. If the pattern needs to match a literal space, it must be explicitly escaped.

                      SELECT REGEXP_REPLACE('abc123def456', '\d+', 'NUM');
                      -- Result: 'abcNUMdefNUM'

                      SELECT REGEXP_REPLACE('Hello\nHELLO\nhello', '^hello', 'X', 1, 0, 'im');
                      -- Result: 'X\nX\nX'

REPLACE(string_expression, string_pattern, string_replacement)

Replaces all occurrences of a string with another string.

string_expression: The string expression to be searched. This can be a character or binary data type.
string_pattern: The substring to be found. Cannot be an empty string.
string_replacement: The replacement string.

                      SELECT REPLACE('1234567890', '456', '|');
                      -- Result: '123|7890'

                      SELECT REPLACE('123123123', '123', '.');
                      -- Result: '...'

                      SELECT REPLACE('1234567890', 'a', 'b');
                      -- Result: '1234567890'

REPLICATE ( string_expression ,integer_expression )

Repeats the string value the specified number of times.

string_expression: The string to replicate.
integer_expression: The repeat count.

                      SELECT REPLACE('x', 5);
                      -- Result: 'xxxxx'

REVERSE ( string_expression )

Returns the reverse order of the string expression.

string_expression: The string.

                      SELECT REVERSE('1234567890');
                      -- Result: '0987654321'

RIGHT ( character_expression , integer_expression )

Returns the right part of the string with the specified number of characters.

character_expression: The character expression.
integer_expression: The positive integer that specifies how many characters of the character expression will be returned.

                      SELECT RIGHT('1234567890', 3);
                      -- Result: '890'

RTRIM(character_expression)

Returns the character expression after it removes trailing blanks.

character_expression: The character expression.

                      SELECT RTRIM('trimmed     ');
                      -- Result: 'trimmed'

SOUNDEX(character_expression)

Returns the four-character Soundex code, based on how the string sounds when spoken.

character_expression: The alphanumeric expression of character data.

                      SELECT SOUNDEX('smith');
                      -- Result: 'S530'

SPACE(repeatcount)

Returns the string that consists of repeated spaces.

repeatcount: The number of spaces.

                      SELECT SPACE(5);
                      -- Result: '     '

SPLIT(string, delimiter, offset)

Returns a section of the string between to delimiters.

string: The string to split.
delimiter: The character to split the string with.
offset: The number of the split to return. Positive numbers are treated as offsets from the left, and negative numbers are treated as offsets from the right.

                      SELECT SPLIT('a/b/c/d', '/', 1);
                      -- Result: 'a'
                      SELECT SPLIT('a/b/c/d', '/', -2);
                      -- Result: 'c'

STARTSWITH(character_expression, character_prefix)

Returns 1 if character_expression starts with character_prefix; otherwise, 0.

character_expression: The character expression.
character_prefix: The character prefix to search for.

                      SELECT STARTSWITH('0123456', '012');
                      -- Result: 1

                      SELECT STARTSWITH('0123456', '456');
                      -- Result: 0

STR ( float_expression [ , integer_length [ , integer_decimal ] ] )

Returns the character data converted from the numeric data. For example, STR(123.45, 6, 1) returns 123.5.

float_expression: The float expression.
length: The optional total length to return. This includes decimal point, sign, digits, and spaces. The default is 10.
decimal: The optional number of places to the right of the decimal point. The decimal must be less than or equal to 16.

                      SELECT STR('123.456');
                      -- Result: '123'

                      SELECT STR('123.456', 2);
                      -- Result: '**'

                      SELECT STR('123.456', 10, 2);
                      -- Result: '123.46'

STUFF(character_expression , integer_start , integer_length , replaceWith_expression)

Inserts a string into another string. It deletes the specified length of characters in the first string at the start position and then inserts the second string into the first string at the start position.

character_expression: The string expression.
start: The integer value that specifies the location to start deletion and insertion. If start or length is negative, null is returned. If start is longer than the string to be modified, character_expression, null is returned.
length: The integer that specifies the number of characters to delete. If length is longer than character_expression, deletion occurs up to the last character in replaceWith_expression.
replaceWith_expression: The expression of character data that will replace length characters of character_expression beginning at the start value.

                      SELECT STUFF('1234567890', 3, 2, 'xx');
                      -- Result: '12xx567890'

SUBSTRING(string_value FROM start FOR length)

Returns the part of the string with the specified length; starts at the specified index.

string_value: The character string.
start: The positive integer that specifies the start index of characters to return.
length: Optional. The positive integer that specifies how many characters will be returned.

                      SELECT SUBSTRING('1234567890' FROM 3 FOR 2);
                      -- Result: '34'

                      SELECT SUBSTRING('1234567890' FROM 3);
                      -- Result: '34567890'

You can also drop the FROM and FOR clauses:

                    SELECT SUBSTRING('1234567890', 3, 2)
                    --Result: '34'
                    SELECT SUBSTRING('1234567890', 3)
                    --Result: '34567890'

TEXT_ENCODE(input_string, charset)

Returns binary output by encoding a string using the specified character set.

input_string: The plain text string.
charset: The character set to use, such as 'UTF-8', 'ISO-8859-1'.

                    SELECT TEXT_ENCODE('Café', 'UTF-8');
                    -- Result: (binary output)

TEXT_DECODE(input_binary, charset)

Returns a string decoded from binary data using the specified character set.

input_binary: The binary value to decode.
charset: The character set used for decoding.

                    SELECT TEXT_DECODE(BinaryData, 'UTF-8');
                    -- Result: 'Café'

TOSTRING(string_value1)

Converts the value of this instance to its equivalent string representation.

string_value1: The string to be converted.

                      SELECT TOSTRING(123);
                      -- Result: '123'

                      SELECT TOSTRING(123.456);
                      -- Result: '123.456'

                      SELECT TOSTRING(null);
                      -- Result: ''

TRIM(trimspec trimchar FROM string_value)

Returns the character expression with leading and/or trailing blanks removed.

trimspec: Optional. If included must be one of the keywords BOTH, LEADING or TRAILING.
trimchar: Optional. If included should be a one-character string value.
string_value: The string value to trim.

                      SELECT TRIM('     trimmed     ');
                      -- Result: 'trimmed'

                      SELECT TRIM(LEADING FROM '     trimmed     ');
                      -- Result: 'trimmed     '

                      SELECT TRIM('-' FROM '-----trimmed-----');
                      -- Result: 'trimmed'

                      SELECT TRIM(BOTH '-' FROM '-----trimmed-----');
                      -- Result: 'trimmed'

                      SELECT TRIM(TRAILING '-' FROM '-----trimmed-----');
                      -- Result: '-----trimmed'

UNICODE(ncharacter_expression)

Returns the integer value defined by the Unicode standard of the first character of the input expression.

ncharacter_expression: The Unicode character expression.

UPPER ( character_expression )

Returns the character expression with lowercase character data converted to uppercase.

character_expression: The character expression.

                      SELECT UPPER('MIXED case');
                      -- Result: 'MIXED CASE'

XML_EXTRACT(xml, xpath [, separator])

Extracts an XML document using the specified XPath to flatten the XML. A comma is used to separate the outputs by default, but this can be changed by specifying the third parameter.

xml: The XML document to extract.
xpath: The XPath used to select the nodes. The nodes selected will be returned in a token-separated list.
separator: The optional token used to separate the items in the flattened response. If this is not specified, the separator will be a comma.

                      SELECT XML_EXTRACT('<vowels><ch>a</ch><ch>e</ch><ch>i</ch><ch>o</ch><ch>u</ch></vowels>', '/vowels/ch');
                      -- Result: 'a,e,i,o,u'

                      SELECT XML_EXTRACT('<vowels><ch>a</ch><ch>e</ch><ch>i</ch><ch>o</ch><ch>u</ch></vowels>', '/vowels/ch', ';');
                      -- Result: 'a;e;i;o;u'

MATH Functions

ABS ( numeric_expression )

Returns the absolute (positive) value of the specified numeric expression.

numeric_expression: The expression of an indeterminate numeric data type except for the bit data type.

                      SELECT ABS(15);
                      -- Result: 15

                      SELECT ABS(-15);
                      -- Result: 15

ACOS ( float_expression )

Returns the arc cosine, the angle in radians whose cosine is the specified float expression.

float_expression: The float expression that specifies the cosine of the angle to be returned. Values outside the range from -1 to 1 return null.

                      SELECT ACOS(0.5);
                      -- Result: 1.0471975511966

ASIN ( float_expression )

Returns the arc sine, the angle in radians whose sine is the specified float expression.

float_expression: The float expression that specifies the sine of the angle to be returned. Values outside the range from -1 to 1 return null.

                      SELECT ASIN(0.5);
                      -- Result: 0.523598775598299

ATAN ( float_expression )

Returns the arc tangent, the angle in radians whose tangent is the specified float expression.

float_expression: The float expression that specifies the tangent of the angle to be returned.

                      SELECT ATAN(10);
                      -- Result: 1.47112767430373

ATN2 ( float_expression1 , float_expression2 )

Returns the angle in radians between the positive x-axis and the ray from the origin to the point (y, x) where x and y are the values of the two specified float expressions.

float_expression1: The float expression that is the y-coordinate.
float_expression2: The float expression that is the x-coordinate.

                      SELECT ATN2(1, 1);
                      -- Result: 0.785398163397448

CEILING ( numeric_expression ) or CEIL( numeric_expression )

Returns the smallest integer greater than or equal to the specified numeric expression.

numeric_expression: The expression of an indeterminate numeric data type except for the bit data type.

                      SELECT CEILING(1.3);
                      -- Result: 2

                      SELECT CEILING(1.5);
                      -- Result: 2

                      SELECT CEILING(1.7);
                      -- Result: 2

COS ( float_expression )

Returns the trigonometric cosine of the specified angle in radians in the specified expression.

float_expression: The float expression of the specified angle in radians.

                      SELECT COS(1);
                      -- Result: 0.54030230586814

COT ( float_expression )

Returns the trigonometric cotangent of the angle in radians specified by float_expression.

float_expression: The float expression of the angle in radians.

                      SELECT COT(1);
                      -- Result: 0.642092615934331

DEGREES ( numeric_expression )

Returns the angle in degrees for the angle specified in radians.

numeric_expression: The angle in radians, an expression of an indeterminate numeric data type except for the bit data type.

                      SELECT DEGREES(3.1415926);
                      -- Result: 179.999996929531

EXP ( float_expression )

Returns the exponential value of the specified float expression. For example, EXP(LOG(20)) is 20.

float_expression: The float expression.

                      SELECT EXP(2);
                      -- Result: 7.38905609893065

EXPR ( expression )

Evaluates the expression.

expression: The expression. Operators allowed are +, -, *, /, ==, !=, >, <, >=, and <=.

                      SELECT EXPR('1 + 2 * 3');
                      -- Result: 7

                      SELECT EXPR('1 + 2 * 3 == 7');
                      -- Result: true

FLOOR ( numeric_expression )

Returns the largest integer less than or equal to the numeric expression.

numeric_expression: The expression of an indeterminate numeric data type except for the bit data type.

                      SELECT FLOOR(1.3);
                      -- Result: 1

                      SELECT FLOOR(1.5);
                      -- Result: 1

                      SELECT FLOOR(1.7);
                      -- Result: 1

GREATEST(int1,int2,....)

Returns the greatest of the supplied integers.

				SELECT GREATEST(3,5,8,10,1)
				-- Result: 10

HEX(value)

Returns a the equivalent hex for the input value.

value: A string or numerical value to be converted into hex.

				SELECT HEX(866849198);
				-- Result: 33AB11AE
				
				SELECT HEX('Sample Text');
				-- Result: 53616D706C652054657874

JSON_AVG(json, jsonpath)

Computes the average value of a JSON array within a JSON object. The path to the array is specified in the jsonpath argument. Return value is numeric or null.

json: The JSON document to compute.
jsonpath: The JSONPath used to select the nodes. [x], [2..], [..8], or [1..12] are accepted. [x] selects all nodes.

                      SELECT JSON_AVG('[1,2,3,4,5]', '$[x]');
                      -- Result: 3

                      SELECT JSON_AVG('{"test": {"data": [1,2,3,4,5]}}', '$.test.data[x]');
                      -- Result: 3

                      SELECT JSON_AVG('{"test": {"data": [1,2,3,4,5]}}', '$.test.data[3..]');
                      -- Result: 4.5

JSON_COUNT(json, jsonpath)

Returns the number of elements in a JSON array within a JSON object. The path to the array is specified in the jsonpath argument. Return value is numeric or null.

json: The JSON document to compute.
jsonpath: The JSONPath used to select the nodes. [x], [2..], [..8], or [1..12] are accepted. [x] selects all nodes.

                      SELECT JSON_COUNT('[1,2,3,4,5]', '$[x]');
                      -- Result: 5

                      SELECT JSON_COUNT('{"test": {"data": [1,2,3,4,5]}}', '$.test.data[x]');
                      -- Result: 5

                      SELECT JSON_COUNT('{"test": {"data": [1,2,3,4,5]}}', '$.test.data[3..]');
                      -- Result: 2

JSON_MAX(json, jsonpath)

Gets the maximum value in a JSON array within a JSON object. The path to the array is specified in the jsonpath argument. Return value is numeric or null.

json: The JSON document to compute.
jsonpath: The JSONPath used to select the nodes. [x], [2..], [..8], or [1..12] are accepted. [x] selects all nodes.

                      SELECT JSON_MAX('[1,2,3,4,5]', '$[x]');
                      -- Result: 5

                      SELECT JSON_MAX('{"test": {"data": [1,2,3,4,5]}}', '$.test.data[x]');
                      -- Result: 5

                      SELECT JSON_MAX('{"test": {"data": [1,2,3,4,5]}}', '$.test.data[..3]');
                      -- Result: 4

JSON_MIN(json, jsonpath)

Gets the minimum value in a JSON array within a JSON object. The path to the array is specified in the jsonpath argument. Return value is numeric or null.

json: The JSON document to compute.
jsonpath: The JSONPath used to select the nodes. [x], [2..], [..8], or [1..12] are accepted. [x] selects all nodes.

                      SELECT JSON_MIN('[1,2,3,4,5]', '$[x]');
                      -- Result: 1

                      SELECT JSON_MIN('{"test": {"data": [1,2,3,4,5]}}', '$.test.data[x]');
                      -- Result: 1

                      SELECT JSON_MIN('{"test": {"data": [1,2,3,4,5]}}', '$.test.data[3..]');
                      -- Result: 4

JSON_SUM(json, jsonpath)

Computes the summary value in JSON according to the JSONPath expression. Return value is numeric or null.

json: The JSON document to compute.
jsonpath: The JSONPath used to select the nodes. [x], [2..], [..8], or [1..12] are accepted. [x] selects all nodes.

                      SELECT JSON_SUM('[1,2,3,4,5]', '$[x]');
                      -- Result: 15

                      SELECT JSON_SUM('{"test": {"data": [1,2,3,4,5]}}', '$.test.data[x]');
                      -- Result: 15

                      SELECT JSON_SUM('{"test": {"data": [1,2,3,4,5]}}', '$.test.data[3..]');
                      -- Result: 9

LEAST(int1,int2,....)

Returns the least of the supplied integers.

				SELECT LEAST(3,5,8,10,1)
				-- Result: 1

LOG ( float_expression [, base ] )

Returns the natural logarithm of the specified float expression.

float_expression: The float expression.
base: The optional integer argument that sets the base for the logarithm.

                      SELECT LOG(7.3890560);
                      -- Result: 1.99999998661119

LOG10 ( float_expression )

Returns the base-10 logarithm of the specified float expression.

float_expression: The expression of type float.

                      SELECT LOG10(10000);
                      -- Result: 4

MOD(dividend,divisor)

Returns the integer value associated with the remainder when dividing the dividend by the divisor.

dividend: The number to take the modulus of.
divisor: The number to divide the dividend by when determining the modulus.

				SELECT MOD(10,3);
				-- Result: 1

NEGATE(real_number)

Returns the opposite to the real number input.

real_number: The real number to find the opposite of.

				SELECT NEGATE(10);
				-- Result: -10
				
				SELECT NEGATE(-12.4)
				--Result: 12.4

PI ( )

Returns the constant value of pi.

                  SELECT PI()
                  -- Result: 3.14159265358979

POWER ( float_expression , y )

Returns the value of the specified expression raised to the specified power.

float_expression: The float expression.
y: The power to raise float_expression to.

                      SELECT POWER(2, 10);
                      -- Result: 1024

                      SELECT POWER(2, -2);
                      -- Result: 0.25

RADIANS ( float_expression )

Returns the angle in radians of the angle in degrees.

float_expression: The degrees of the angle as a float expression.

                      SELECT RADIANS(180);
                      -- Result: 3.14159265358979

RAND ( [ integer_seed ] )

Returns a pseudorandom float value from 0 through 1, exclusive.

seed: The optional integer expression that specifies the seed value. If seed is not specified, a seed value at random will be assigned.

                      SELECT RAND();
                      -- This result may be different, since the seed is randomized
                      -- Result: 0.873159630165044

                      SELECT RAND(1);
                      -- This result will always be the same, since the seed is constant
                      -- Result: 0.248668584157093

ROUND ( numeric_expression [ ,integer_length] [ ,function ] )

Returns the numeric value rounded to the specified length or precision.

numeric_expression: The expression of a numeric data type.
length: The optional precision to round the numeric expression to. When this is omitted, the default behavior will be to round to the nearest whole number.
function: The optional type of operation to perform. When the function parameter is omitted or has a value of 0 (default), numeric_expression is rounded. When a value other than 0 is specified, numeric_expression is truncated.

                      SELECT ROUND(1.3, 0);
                      -- Result: 1

                      SELECT ROUND(1.55, 1);
                      -- Result: 1.6

                      SELECT ROUND(1.7, 0, 0);
                      -- Result: 2

                      SELECT ROUND(1.7, 0, 1);
                      -- Result: 1
                      
                      SELECT ROUND (1.24);
                      -- Result: 1.0

SIGN ( numeric_expression )

Returns the positive sign (1), 0, or negative sign (-1) of the specified expression.

numeric_expression: The expression of an indeterminate data type except for the bit data type.

                      SELECT SIGN(0);
                      -- Result: 0

                      SELECT SIGN(10);
                      -- Result: 1

                      SELECT SIGN(-10);
                      -- Result: -1

SIN ( float_expression )

Returns the trigonometric sine of the angle in radians.

float_expression: The float expression specifying the angle in radians.

                     SELECT SIN(1);
                     -- Result: 0.841470984807897

SQRT ( float_expression )

Returns the square root of the specified float value.

float_expression: The expression of type float.

                      SELECT SQRT(100);
                      -- Result: 10

SQUARE ( float_expression )

Returns the square of the specified float value.

float_expression: The expression of type float.

                      SELECT SQUARE(10);
                      -- Result: 100

                      SELECT SQUARE(-10);
                      -- Result: 100

TAN ( float_expression )

Returns the tangent of the input expression.

float_expression: The expression of type float.

                      SELECT TAN(1);
                      -- Result: 1.5574077246549

TRUNC(decimal_number,precision)

Returns the supplied decimal number truncated to have the supplied decimal precision.

decimal_number: The decimal value to truncate.
precision: The number of decimal places to truncate the decimal number to.

				SELECT TRUNC(10.3423,2);
				-- Result: 10.34

_ROW_NUMBER_()

Returns a row index as an additional column.

				SELECT ColumnName, _ROW_NUMBER_() FROM TableName
				-- Result: ColumnData, 0
				ColumnData2, 1
				ColumnData3, 2

DATE Functions

CURRENT_DATE()

Returns the current date value.

                  SELECT CURRENT_DATE();
                  -- Result: 2018-02-01

CURRENT_TIMESTAMP()

Returns the current time stamp of the database system as a datetime value. This value is equal to GETDATE and SYSDATETIME, and is always in the local timezone.

                  SELECT CURRENT_TIMESTAMP();
                  -- Result: 2018-02-01 03:04:05

DATEADD (datepart , integer_number , date [, dateformat])

Returns the datetime value that results from adding the specified number (a signed integer) to the specified date part of the date.

datepart: The part of the date to add the specified number to. The valid values and abbreviations are
- year (yy, yyyy)
- quarter (qq, q)
- month (mm, m)
- week (wk, ww)
- weekday (dw)
- dayofyear (dy, y)
- day (dd, d)
- hour (hh)
- minute (mi, n)
- second (ss, s)
- millisecond (ms)
number: The number to be added.
date: The expression of the datetime data type.
dateformat: The optional output date format.

                  SELECT DATEADD('d', 5, '2018-02-01');
                  -- Result: 2018-02-06

                  SELECT DATEADD('hh', 5, '2018-02-01 00:00:00');
                  -- Result: 2018-02-01 05:00:00

DATEDIFF ( datepart , startdate , enddate )

Returns the difference (a signed integer) of the specified time interval between the specified start date and end date.

datepart: The part of the date that is the time interval of the difference between the start date and end date. The valid values and abbreviations are:
- Year (year, yyyy, yy)
- Quarter (quarter, qq, q)
- Month (month, mm, m)
- Week (week, wk, ww)
- Weekday (weekday, dw)
- Dayofyear (dayofyear, dy, y)
- Day (day, dd, d)
- Hour (hour, hh)
- Minute (minute, mi, n)
- Second (second, ss, s)
- Millisecond (millisecond, ms)
startdate: The datetime expression of the start date.
enddate: The datetime expression of the end date.

                  SELECT DATEDIFF('d', '2018-02-01', '2018-02-10');
                  -- Result: 9

                  SELECT DATEDIFF('hh', '2018-02-01 00:00:00', '2018-02-01 12:00:00');
                  -- Result: 12

DATE_FORMAT(date,format)

Returns the date or timestamp in the format specified. This function mirrors the MySQL DATE_FORMAT function.

date: A date or timestamp string.
format: The specifier string of the desired output format. The list of supported format specifiers comes from the MySQL DATE_FORMAT function (see link to MySQL documentation above).

					SELECT DATE_FORMAT('9/4/2021 3:11:53 AM','%h')
					-- Result: 03

DATEFROMPARTS(integer_year, integer_month, integer_day)

Returns the datetime value for the specified year, month, and day.

year: The integer expression specifying the year.
month: The integer expression specifying the month.
day: The integer expression specifying the day.

                    SELECT DATEFROMPARTS(2018, 2, 1);
                    -- Result: 2018-02-01

DATENAME(datepart , date)

Returns the character string that represents the specified date part of the specified date.

datepart: The part of the date to return. The valid values and abbreviations are year (yy, yyyy), quarter (qq, q), month (mm, m), dayofyear (dy, y), day (dd, d), week (wk, ww), weekday (dw), hour (hh), minute (mi, n), second (ss, s), millisecond (ms), microsecond (mcs), and nanosecond (ns).
date: The datetime expression.

                     SELECT DATENAME('yy', '2018-02-01');
                     -- Result: '2018'

                     SELECT DATENAME('dw', '2018-02-01');
                     -- Result: 'Thursday'

DATEPART(datepart, date [,integer_datefirst])

Returns a character string that represents the specified date part of the specified date.

datepart: The part of the date to return. The valid values and abbreviations are year (yy, yyyy), quarter (qq, q), month (mm, m), dayofyear (dy, y), day (dd, d), week (wk, ww), weekday (dw), hour (hh), minute (mi, n), second (ss, s), millisecond (ms), microsecond (mcs), nanosecond (ns), ISODOW, ISO_WEEK (isoweek, isowk,isoww), and ISOYEAR.
date: The datetime string.
datefirst: The optional integer representing the first day of the week. The default is 7, Sunday.

                    SELECT DATEPART('yy', '2018-02-01');
                    -- Result: 2018

                    SELECT DATEPART('dw', '2018-02-01');
                    -- Result: 5

DATETIMEFROMPARTS(integer_year, integer_month, integer_day, integer_hour, integer_minute, integer_seconds, integer_milliseconds)

Returns the datetime value for the specified date parts.

year: The integer expression specifying the year.
month: The integer expression specifying the month.
day: The integer expression specifying the day.
hour: The integer expression specifying the hour.
minute: The integer expression specifying the minute.
seconds: The integer expression specifying the seconds.
milliseconds: The integer expression specifying the milliseconds.

                    SELECT DATETIMEFROMPARTS(2018, 2, 1, 1, 2, 3, 456);
                    -- Result: 2018-02-01 01:02:03.456

DATETIME2FROMPARTS(integer_year, integer_month, integer_day, integer_hour, integer_minute, integer_seconds, integer_fractions, integer_precision)

Returns the datetime value for the specified date parts.

year: The integer expression specifying the year.
month: The integer expression specifying the month.
day: The integer expression specifying the day.
hour: The integer expression specifying the hour.
minute: The integer expression specifying the minute.
seconds: The integer expression specifying the seconds.
fractions: The integer expression specifying the fractions of the second.
precision: The integer expression specifying the precision of the fraction.

				    SELECT DATETIME2FROMPARTS(2018, 2, 1, 1, 2, 3, 456, 3);
                    -- Result: 2018-02-01 01:02:03.456

DATE_TRUNC(date, datepart)

Truncates the date to the precision of the given date part. Modeled after the Oracle TRUNC function.

date: The datetime string that specifies the date.
datepart: Refer to the Oracle documentation for valid datepart syntax.

				    SELECT DATE_TRUNC('05-04-2005', 'YY');
                    -- Result: '1/1/2005'
					
                    SELECT DATE_TRUNC('05-04-2005', 'MM');
                    -- Result: '5/1/2005'

DATE_TRUNC2(datepart, date, [weekday])

Truncates the date to the precision of the given date part. Modeled after the PostgreSQL date_trunc function.

datepart: One of 'millennium', 'century', 'decade', 'year', 'quarter', 'month', 'week', 'day', 'hour', 'minute' or 'second'.
date: The datetime string that specifies the date.
weekday: The optional day of the week to use as the first day for 'week'. One of 'sunday', 'monday', etc.

                    SELECT DATE_TRUNC2('year', '2020-02-04');
                    -- Result: '2020-01-01'

                    SELECT DATE_TRUNC2('week', '2020-02-04', 'monday');
                    -- Result: '2020-02-02', which is the previous Monday

DAY(date)

Returns the integer that specifies the day component of the specified date.

date: The datetime string that specifies the date.

                    SELECT DAY('2018-02-01');
                    -- Result: 1

DAYNAME(date)

Returns the name of the day of the week of the specified date.

date: The datetime string that specifies the date.

                    SELECT DAYNAME('8/18/2021');
                    -- Result: Wednesday

DAYOFMONTH(date)

Returns the day of the month of the given date part.

date: The datetime string that specifies the date.

				  SELECT DAYOFMONTH('04/15/2000');
				  -- Result: 15

DAYOFWEEK(date)

Returns the day of the week of the given date part.

date: The datetime string that specifies the date.

				  SELECT DAYOFWEEK('04/15/2000');
				  -- Result: 7

DAYOFYEAR(date)

Returns the day of the year of the given date part.

date: The datetime string that specifies the date.

				  SELECT DAYOFYEAR('04/15/2000');
				  -- Result: 106

EOMONTH(date [, integer_month_to_add ]) or LAST_DAY(date)

Returns the last day of the month that contains the specified date with an optional offset.

date: The datetime expression specifying the date for which to return the last day of the month.
integer_month_to_add: The optional integer expression specifying the number of months to add to the date before calculating the end of the month.

                  SELECT EOMONTH('2018-02-01');
                  -- Result: 2018-02-28
                  
                  SELECT LAST_DAY('2018-02-01');
                  -- Result: 2018-02-28

                  SELECT EOMONTH('2018-02-01', 2);
                  -- Result: 2018-04-30

EXTRACT(date_part FROM date_column_name)

Returns the last day of the month that contains the specified date with an optional offset.

date_part: One of the following date components: YEAR, MONTH, DAY, HOUR, MINUTE, SECOND.
date_column_name: The name of a date column in a table.

                  SELECT EXTRACT(YEAR FROM DateColumn)
                  -- Result: 2021

FDWEEK(date)

Returns the first day of the week of the given date part.

date: The datetime string that specifies the date.
weeks to add: An optional integer expression specifying the number of months to add to the date before calculating the first day of the week.

				  SELECT FDWEEK('02-08-2018');
				  -- Result: 2/4/2018

          SELECT FDWEEK('02-08-2018', 1)
          --Result: 02/11/2018

FDMONTH(date)

Returns the first day of the month of the given date part.

date: The datetime string that specifies the date.
month to add: An optional integer expression specifying the number of months to add to the date before calculating the first day of the month.

				  SELECT FDMONTH('02-08-2018');
				  -- Result: 2/1/2018

          SELECT FDMONTH('02-08-2018', 1) 
          --Result: 03/01/2018

FDQUARTER(date)

Returns the first day of the quarter of the given date part.

date: The datetime string that specifies the date.
quarters to add: An optional integer expression specifying the number of months to add to the date before calculating the first day of the quarter.

				  SELECT FDQUARTER('05-08-2018');
				  -- Result: 4/1/2018

          SELECT FDQUARTER('05-08-2018',1)
          --Result: 07/01/2018

FILEMODIFIEDTIME(uri)

Returns the time stamp associated with the Date Modified of the relevant file.

uri: An absolute path pointing to a file on the local file system.

				 SELECT FILEMODIFIEDTIME('C:/Documents/myfile.txt');
				 -- Result: 6/25/2019 10:06:58 AM

FROM_DAYS(datevalue)

Returns a date derived from the number of days after 1582-10-15 (based upon the Gregorian calendar). This will be equivalent to the MYSQL FROM_DAYS function.

datevalue: A integer value representing the number of days since 1582-10-15.

				SELECT FROM_DAYS(736000);
				-- Result: 2/6/2015

FROM_UNIXTIME(time, issecond)

Returns a representation of the unix_timestamp argument as a value in YYYY-MM-DD HH:MM:SS expressed in the current time zone.

time: The time stamp value from epoch time. Milliseconds are accepted.
issecond: Indicates the time stamp value is milliseconds to epoch time.

                      SELECT FROM_UNIXTIME(1540495231, 1);
                      -- Result: 2018-10-25 19:20:31

                      SELECT FROM_UNIXTIME(1540495357385, 0);
                      -- Result: 2018-10-25 19:22:37

GETDATE()

Returns the current time stamp of the database system as a datetime value. This value is equal to CURRENT_TIMESTAMP and SYSDATETIME, and is always in the local timezone.

                  SELECT GETDATE();
                  -- Result: 2018-02-01 03:04:05

GETUTCDATE()

Returns the current time stamp of the database system formatted as a UTC datetime value. This value is equal to SYSUTCDATETIME.

In addition, GETUTCDATE can take an optional second parameter, a date and time that are converted to UTC.

                  SELECT GETUTCDATE();
                  -- For example, if the local timezone is Eastern European Time (GMT+2)
                  -- Result: 2018-02-01 05:04:05

                  SELECT GETUTCDATE('2020/08/31 13:56:00')
                  --Result: '2020-08-31 17:56:00'

HOUR(date)

Returns the hour component from the provided datetime.

date: The datetime string that specifies the date.

				SELECT HOUR('02-02-2020 11:30:00');
				-- Result: 11

ISDATE(date, [date_format])

Returns 1 if the value is a valid date, time, or datetime value; otherwise, 0.

date: The datetime string.
date_format: The optional datetime format.

                      SELECT ISDATE('2018-02-01', 'yyyy-MM-dd');
                      -- Result: 1

                      SELECT ISDATE('Not a date');
                      -- Result: 0

LAST_WEEK()

Returns a time stamp equivalent to exactly one week before the current date.

				SELECT LAST_WEEK();	//Assume the date is 3/17/2020	
			 -- Result: 3/10/2020 00:00:00

LAST_MONTH()

Returns a time stamp equivalent to exactly one month before the current date.

	
				SELECT LAST_MONTH(); //Assume the date is 3/17/2020
				-- Result: 2/17/2020 00:00:00

LAST_YEAR()

Returns a time stamp equivalent to exactly one year before the current date.

				SELECT LAST_YEAR();	//Assume the date is 3/17/2020	
				-- Result: 3/10/2019 00:00:00

LDWEEK(date)

Returns the last day of the provided week.

date: The datetime string.
weeks to add: An optional integer expression specifying the number of months to add to the date before calculating the last day of the week.

				SELECT LDWEEK('02-02-2020');
				-- Result: 2/8/2020

LDMONTH(date)

Returns the last day of the provided month.

date: The datetime string.
months to add: An optional integer expression specifying the number of months to add to the date before calculating the last day of the month.

				SELECT LDMONTH('02-02-2020');
				-- Result: 2/29/2020

        SELECT LDMONTH('02-08-2020', 1)
        --Result: 03/31/2020

LDQUARTER(date)

Returns the last day of the provided quarter.

date: The datetime string.
quarters to add: An optional integer expression specifying the number of months to add to the date before calculating the last day of the quarter.

				SELECT LDQUARTER('02-02-2020');
				-- Result: 3/31/2020

        SELECT LDQUARTER('02-02-2020',1)
        --Result: 06/30/2020

MAKEDATE(year, days)

Returns a date value from a year and a number of days.

year: The year
days: The number of days into the year. Value must be greater than 0.

          SELECT MAKEDATE(2020, 1);
          -- Result: 2020-01-01

MINUTE(date)

Returns the minute component from the provided datetime.

date: The datetime string that specifies the date.

				SELECT MINUTE('02-02-2020 11:15:00');
				-- Result: 15

MONTH(date)

Returns the month component from the provided datetime.

date: The datetime string that specifies the date.

				SELECT MONTH('02-02-2020');
				-- Result: 2

QUARTER(date)

Returns the quarter associated with the provided datetime.

date: The datetime string that specifies the date.

				SELECT QUARTER('02-02-2020');
				-- Result: 1

SECOND(date)

Returns the second component from the provided datetime.

date: The datetime string that specifies the date.

				SELECT SECOND('02-02-2020 11:15:23');
				-- Result: 23

SMALLDATETIMEFROMPARTS(integer_year, integer_month, integer_day, integer_hour, integer_minute)

Returns the datetime value for the specified date and time.

year: The integer expression specifying the year.
month: The integer expression specifying the month.
day: The integer expression specifying the day.
hour: The integer expression specifying the hour.
minute: The integer expression specifying the minute.

                      SELECT SMALLDATETIMEFROMPARTS(2018, 2, 1, 1, 2);
                      -- Result: 2018-02-01 01:02:00

STRTODATE(string,format)

Parses the provided string value and returns the corresponding datetime.

string: The string value to be converted to datetime format.
format: A format string which describes how to interpret the first string input. A few special formats are available as well, including UNIX, UNIXMILIS, TICKS, and FILETICKS.

				SELECT STRTODATE('03*04*2020','dd*MM*yyyy');
				-- Result: 4/3/2020

SYSDATETIME()

Returns the current time stamp as a datetime value of the database system. It is equal to GETDATE and CURRENT_TIMESTAMP, and is always in the local timezone.

                  SELECT SYSDATETIME();
                  -- Result: 2018-02-01 03:04:05

SYSUTCDATETIME()

Returns the current system date and time as a UTC datetime value. It is equal to GETUTCDATE.

                  SELECT SYSUTCDATETIME();
                  -- For example, if the local timezone is Eastern European Time (GMT+2)
                  -- Result: 2018-02-01 05:04:05

TIMEFROMPARTS(integer_hour, integer_minute, integer_seconds, integer_fractions, integer_precision)

Returns the time value for the specified time and with the specified precision.

hour: The integer expression specifying the hour.
minute: The integer expression specifying the minute.
seconds: The integer expression specifying the seconds.
fractions: The integer expression specifying the fractions of the second.
precision : The integer expression specifying the precision of the fraction.

                      SELECT TIMEFROMPARTS(1, 2, 3, 456, 3);
                      -- Result: 01:02:03.456

TO_DAYS(date)

Returns the number of days since 0000-00-01. This will only return a value for dates on or after 1582-10-15 (based upon the Gregorian calendar). This will be equivalent to the MYSQL TO_DAYS function.

date: The datetime string that specifies the date.

				SELECT TO_DAYS('02-06-2015');
				-- Result: 736000

WEEK(date)

Returns the week (of the year) associated with the provided datetime.

date: The datetime string that specifies the date.

				SELECT WEEK('02-17-2020 11:15:23');
				-- Result: 8

YEAR(date)

Returns the integer that specifies the year of the specified date.

date: The datetime string.

                      SELECT YEAR('2018-02-01');
                      -- Result: 2018

Date Literal Functions

The following date literal functions can be used to filter date fields using relative intervals. Note that while the <, >, and = operators are supported for these functions, <= and >= are not.

L_TODAY()

The current day.

  SELECT * FROM MyTable WHERE MyDateField = L_TODAY()

L_YESTERDAY()

The previous day.

  SELECT * FROM MyTable WHERE MyDateField = L_YESTERDAY()

L_TOMORROW()

The following day.

  SELECT * FROM MyTable WHERE MyDateField = L_TOMORROW()

L_LAST_WEEK()

Every day in the preceding week.

  SELECT * FROM MyTable WHERE MyDateField = L_LAST_WEEK()

L_THIS_WEEK()

Every day in the current week.

  SELECT * FROM MyTable WHERE MyDateField = L_THIS_WEEK()

L_NEXT_WEEK()

Every day in the following week.

  SELECT * FROM MyTable WHERE MyDateField = L_NEXT_WEEK()

Also available:

L_LAST/L_THIS/L_NEXT MONTH
L_LAST/L_THIS/L_NEXT QUARTER
L_LAST/L_THIS/L_NEXT YEAR

L_LAST_N_DAYS(n)

The previous n days, excluding the current day.

  SELECT * FROM MyTable WHERE MyDateField = L_LAST_N_DAYS(3)

L_NEXT_N_DAYS(n)

The following n days, including the current day.

  SELECT * FROM MyTable WHERE MyDateField = L_NEXT_N_DAYS(3)

Also available:

L_LAST/L_NEXT_90_DAYS

L_LAST_N_WEEKS(n)

Every day in every week, starting n weeks before current week, and ending in the previous week.

  SELECT * FROM MyTable WHERE MyDateField = L_LAST_N_WEEKS(3)

L_NEXT_N_WEEKS(n)

Every day in every week, starting the following week, and ending n weeks in the future.

  SELECT * FROM MyTable WHERE MyDateField = L_NEXT_N_WEEKS(3)

Also available:

L_LAST/L_NEXT_N_MONTHS(n)
L_LAST/L_NEXT_N_QUARTERS(n)
L_LAST/L_NEXT_N_YEARS(n)

SELECT Statements

A SELECT statement can consist of the following basic clauses.

SELECT
INTO
FROM
JOIN
WHERE
GROUP BY
HAVING
UNION
ORDER BY
LIMIT

SELECT Syntax

The following syntax diagram outlines the syntax supported by the SQL engine of the connector:

SELECT {
  [ TOP <numeric_literal> | DISTINCT ]
  { 
    * 
    | { 
        <expression> [ [ AS ] <column_reference> ] 
        | { <table_name> | <correlation_name> } .* 
      } [ , ... ] 
  }
  { 
    FROM <table_reference> [ [ AS ] <identifier> ] 
  } [ , ... ]
  [ [  
      INNER | { { LEFT | RIGHT | FULL } [ OUTER ] } 
    ] JOIN <table_reference> [ ON <search_condition> ] [ [ AS ] <identifier> ] 
  ] [ ... ] 
  [ WHERE <search_condition> ]
  [ GROUP BY <column_reference> [ , ... ]
  [ HAVING <search_condition> ]
  [ UNION [ ALL ] <select_statement> ]
  [ 
    ORDER BY 
    <column_reference> [ ASC | DESC ] [ NULLS FIRST | NULLS LAST ]
  ]
  [ 
    LIMIT <expression>
    [ 
      { OFFSET | , }
      <expression> 
    ]
  ] 
}

<expression> ::=
  | <column_reference>
  | @ <parameter> 
  | ?
  | COUNT( * | { [ DISTINCT ] <expression> } )
  | { AVG | MAX | MIN | SUM | COUNT } ( <expression> ) 
  | NULLIF ( <expression> , <expression> ) 
  | COALESCE ( <expression> , ... ) 
  | CASE <expression>
      WHEN { <expression> | <search_condition> } THEN { <expression> | NULL } [ ... ]
    [ ELSE { <expression> | NULL } ]
    END 
  | {RANK() | DENSE_RANK()} OVER ([PARTITION BY <column_reference>] {ORDER BY <column_reference>})
  | <literal>
  | <sql_function> 

<search_condition> ::= 
  {
    <expression> { = | > | < | >= | <= | <> | != | LIKE | NOT LIKE | IN | NOT IN | IS NULL | IS NOT NULL | AND | OR | CONTAINS | BETWEEN | IS DISTINCT FROM | IS NOT DISTINCT FROM } [ <expression> ]
  } [ { AND | OR } ... ]

Examples

Return all columns:
```
SELECT * FROM Company
```

Rename a column:

SELECT [Address] AS MY_Address FROM Company

Cast a column's data as a different data type:

SELECT CAST(STCrAdjPercent AS VARCHAR) AS Str_STCrAdjPercent FROM Company

Search data:

SELECT * FROM Company WHERE CompanyNumber = '1000'

Return the number of items matching the query criteria:
```
SELECT COUNT(*) AS MyCount FROM Company 
```
Return the number of unique items matching the query criteria:
```
SELECT COUNT(DISTINCT Address) FROM Company 
```
Return the unique items matching the query criteria:
```
SELECT DISTINCT Address FROM Company 
```

Sort a result set in ascending order:

SELECT Name, Address FROM Company  ORDER BY Address ASC

Restrict a result set to the specified number of rows:
```
SELECT Name, Address FROM Company LIMIT 10 
```
Parameterize a query to pass in inputs at execution time. This enables you to create prepared statements and mitigate SQL injection attacks.
```
SELECT * FROM Company WHERE CompanyNumber = @param
```

See Explicitly Caching Data for information on using the SELECT statement in offline mode.

Pseudo Columns

Some input-only fields are available in SELECT statements. These fields, called pseudo columns, do not appear as regular columns in the results, yet may be specified as part of the WHERE clause. You can use pseudo columns to access additional features from Tally.

    SELECT * FROM Company WHERE Query = '@Pseudo'

Aggregate Functions

For SELECT examples using aggregate functions, see Aggregate Functions.

JOIN Queries

See JOIN Queries for SELECT query examples using JOINs.

Date Literal Functions

Date Literal Functions contains SELECT examples with date literal functions.

Window Functions

See Window Functions for SELECT examples containing window functions.

Table-Valued Functions

See Table-Valued Functions for SELECT examples with table-valued functions.

Aggregate Functions

COUNT

Returns the number of rows matching the query criteria.

SELECT COUNT(*) FROM Company WHERE CompanyNumber = '1000'

COUNT(DISTINCT)

Returns the number of distinct, non-null field values matching the query criteria.

SELECT COUNT(DISTINCT Name) AS DistinctValues FROM Company WHERE CompanyNumber = '1000'

AVG

Returns the average of the column values.

SELECT Address, AVG(STCrAdjPercent) FROM Company WHERE CompanyNumber = '1000'  GROUP BY Address

MIN

Returns the minimum column value.

SELECT MIN(STCrAdjPercent), Address FROM Company WHERE CompanyNumber = '1000' GROUP BY Address

MAX

Returns the maximum column value.

SELECT Address, MAX(STCrAdjPercent) FROM Company WHERE CompanyNumber = '1000' GROUP BY Address

SUM

Returns the total sum of the column values.

SELECT SUM(STCrAdjPercent) FROM Company WHERE CompanyNumber = '1000'

JOIN Queries

The CData Python Connector for Tally supports standard SQL joins like the following examples.

Inner Join

An inner join selects only rows from both tables that match the join condition:

SELECT c.Name, e.MailingName, e.Address, e.EMailID FROM Company c INNER JOIN Employees e ON c.Guid = e.Guid

Left Join

A left join selects all rows in the FROM table and only matching rows in the JOIN table:

 SELECT c.Name, e.MailingName, e.Address, e.EMailID FROM Company c LEFT JOIN Employees e ON c.Guid = e.Guid

Window Functions

Window functions allow you to create computed fields from a group of rows (a window) that return a result for each row, as opposed to one computed result for a set of rows, as is the case with aggregate functions. The connector supports the following window function syntax.

Note: Window function support is an experimental feature of the connector. This functionality extends beyond the connector's core scope of being SQL-92 compliant. As such, performance with window functions may not be optimal.

Window Function Clauses

OVER

The OVER clause defines the window over which window functions are performed.

SELECT A, B, <window function> OVER (<window frame>) FROM TableName

The <window function> refers to any supported window function clause, and the <window frame> refers to one or more clauses that specify the logic by which the window is defined.

PARTITION BY

The PARTITION BY clause subdivides a window into sub-windows called partitions. For each unique value in the column specified in the PARTITION BY clause, every record with that value collectively forms an individual partition.

SELECT A, B, <window function> OVER (PARTITION BY A ORDER BY B) From Company

The <window function> refers to any supported window function clause.

Window Functions

The connector supports math, ranking, and analytic window functions.

Math

These window functions perform mathematical operations on the records within the window.

COUNT()

Calculates the number of records in each partition. The calculated column is of the data type "int".

In each partition, every record will display the total number of records in that partition.

SELECT Name, Role, Earnings, COUNT() OVER (PARTITION BY Role) FROM Employees

COUNT_BIG()

Calculates the number of records in each partition. The calculated column is of the data type "bigint".

In each partition, every record will display the total number of records in that partition.

SELECT Name, Role, Earnings, COUNT_BIG() OVER (PARTITION BY Role) FROM Employees

MIN(numeric_column)

Calculates the minimum value of a numerical column per partition.

In each partition, every record will display the minimum value of numeric_column across the records in that partition.

SELECT Name, Role, Earnings, MIN(Earnings) OVER (PARTITION BY Role) FROM Employees

MAX(numeric_column)

Calculates the maximum value of a numerical column per partition.

In each partition, every record will display the maximum value of numeric_column across the records in that partition.

SELECT Name, Role, Earnings, MAX(Earnings) OVER (PARTITION BY Role) FROM Employees

SUM(numeric_column)

Calculates the sum of a numerical column per partition.

In each partition, every record will display the sum of numeric_column across the records in that partition.

SELECT Name, Role, Earnings, SUM(Earnings) OVER (PARTITION BY Role) FROM Employees

AVG(numeric_column)

Calculates the average value of a numerical column per partition.

In each partition, every record will display the average value of numeric_column across the records in that partition.

SELECT Name, Role, Earnings, AVG(Earnings) OVER (PARTITION BY Role) FROM Employees

MEDIAN(numeric_column)

Calculates the median value of a numerical column per partition.

In each partition, every record will display the median value of numeric_column across the records in that partition.

SELECT Name, Role, Earnings, MEDIAN(Earnings) OVER (PARTITION BY Role) FROM Employees

STDEV(numeric_column)

Calculates the standard deviation of a numerical column per partition.

In each partition, every record will display the standard deviation of numeric_column across the records in that partition.

SELECT Name, Role, Earnings, STDEV(Earnings) OVER (PARTITION BY Role) FROM Employees

STDEVP(numeric_column)

Calculates the population standard deviation of a numerical column per partition.

In each partition, every record will display the population standard deviation of numeric_column across the records in that partition.

SELECT Name, Role, Earnings, STDEVP(Earnings) OVER (PARTITION BY Role) FROM Employees

VAR(numeric_column)

Calculates the statistical standard variance of a numerical column per partition.

In each partition, every record will display the statistical standard variance of numeric_column across the records in that partition.

SELECT Name, Role, Earnings, VAR(Earnings) OVER (PARTITION BY Role) FROM Employees

VARP(numeric_column)

Calculates the variance population of a numerical column per partition.

In each partition, every record will display the variance population of numeric_column across the records in that partition.

SELECT Name, Role, Earnings, VARP(Earnings) OVER (PARTITION BY Role) FROM Employees

Ranking

These window functions rank records that fall within the window and its partitions.

RANK()

Assigns a rank number to each record in a window based on the value of the column specified in the required ORDER BY clause.

If two or more records have an equal value in the in ranked column, they all receive the same rank number and the rank count increments internally, skipping ahead one rank number for each record with a duplicate value in the ORDER BY column.

SELECT Name, Address, RANK() OVER (ORDER BY Address) AS Rank FROM Company

If you add a PARTITION BY clause, a separate set of ranks is calculated for each partition.

SELECT Name, Address, RANK() OVER (PARTITION BY Name ORDER BY Address) AS Rank FROM Company

DENSE_RANK()

Operates like the RANK() function, but it doesn't increment the internal rank counter for each record with a duplicate value in the ranked column.

This means that, while records with identical values in the ORDER BY column still share a rank number, the function never skips a rank number.

SELECT Name, Address, DENSE_RANK() OVER (PARTITION BY Name ORDER BY Address) AS Rank FROM Company

If you add a PARTITION BY clause, a separate set of ranks is calculated for each partition.

SELECT Name, Address, DENSE_RANK() OVER (PARTITION BY Name ORDER BY Address) AS Rank FROM Company

ROW_NUMBER()

Calculates a row number for each record. An ORDER BY clause in the OVER clause is required.

SELECT Name, Role, Earnings, ROW_NUMBER() OVER (ORDER BY Role) FROM Employees

If you define multiple partitions with PARTITION BY, a new set of row numbers are calculated for each partition.

SELECT Name, Role, Earnings, ROW_NUMBER() OVER (PARTITION BY Role ORDER BY Earnings) FROM Employees

NTILE()

Distributes rows of an ordered partition into a specified number of approximately equal groups, or buckets. It assigns each group a bucket number starting from one. For each row in a group, the NTILE() function assigns a bucket number representing the group to which the row belongs.

The syntax of NTILE() is:

NTILE(buckets) OVER (
    [PARTITION BY partition_expression, ... ]
    ORDER BY sort_expression [ASC | DESC], ...
)

The following are paramaters that NTILE() supports:

buckets: The number of buckets into which the rows are divided. The buckets can be an expression or subquery that evaluates to a positive integer. It cannot be a window function.
PARTITION BY: distributes rows of a result set into partitions to which the NTILE() function is applied.
ORDER BY is clause that specifies the logical order of rows in each partition to which the NTILE() is applied.

If the number of rows is not divisible by the buckets, the NTILE() function returns groups of two sizes with the difference by one. The larger groups always precede the smaller group in the order set by ORDER BY in the OVER() clause.

If the total of rows is divisible by the number of buckets, the function divides the rows evenly among buckets. The following statement creates a new table named ntile_demo that stores 10 integers:

CREATE TABLE sales.ntile_demo (
	v INT NOT NULL
);
	
INSERT INTO sales.ntile_demo(v) 
VALUES(1),(2),(3),(4),(5),(6),(7),(8),(9),(10);	
	
SELECT * FROM sales.ntile_demo;

This statement uses the NTILE() function to divide ten rows into three groups:

SELECT 
	v, 
	NTILE (3) OVER (
		ORDER BY v
	) buckets
FROM 
	sales.ntile_demo;

Analytical

These window functions perform analytical operations on the records within the window.

PERCENT_RANK()

Calculates the relative rank SQL Percentile of each row. It returns values greater than zero, but the maximum value is one. It does not count any NULL values. This function is nondeterministic.

The syntax of PERCENT_RANK() is:

PERCENT_RANK() OVER (
      [PARTITION BY partition_expression, ... ]
      ORDER BY sort_expression [ASC | DESC], ...
  )

This syntax uses the following parameters.

PARTITION BY: By default, SQL Server treats the whole data set as a single set. You can specify the PARTITION BY clause to divide data into multiple sets. The Percent_Rank function performs the analytical calculations on each set. This parameter is optional.
ORDER BY: Sorts the data in either ascending or descending order. This parameter is required.

Table-Valued Functions

Table-valued functions are functions that return a table (rowset).

Note: Table-valued function support is an experimental feature of the connector. This functionality extends beyond the connector's core scope of being SQL-92 compliant. As such, performance with these functions may not be optimal.

Table-Valued Function Clauses

CROSS APPLY

The CROSS APPLY operator is used to perform a subquery on each row of a table or resultset produced by a preceding table expression.

<table_expression_1> CROSS APPLY <table_expression_2>

The second table expression can reference results from the first table expression to create derived columns or an altered recordset via a table-valued function.

Each resulting record is an instance of the record it's splitting, with all the same column values, except for the column(s) containing the value split by the function.

WITH

The WITH clause is used alongside certain table-valued functions to match against constructs within the structure being split (keys, element names, attribute names, etc.) and/or to specify metadata for the columns generated from the function.

SELECT A.ColumnName, X.DerivedColumnName FROM TableName A CROSS APPLY <table-valued function> WITH (DerivedColumnName varchar(255)) AS X

Table-Valued Functions

STRING_SPLIT(input_text,delimiter)

Takes each record in the recordset of the preceding table expression, splits the column containing delimiters (input_text) into substrings separated by the delimiter, and returns one record per substring.

input_text: A column whose value you want to parse.
delimiter: The character used to split the value of the column specified in input_text.

Suppose there is a column called "SplitColumn" with the following content:

One-Two-Three

To unpack this value across multiple records:

SELECT A.ID, X.Value FROM [TableWithDelimitedStringField] A CROSS APPLY STRING_SPLIT(A.SplitColumn,'-') WITH (Value VARCHAR(255)) AS X

-- Results:
-----------
|ID|Value|
|1|One|
|1|Two|
|1|Three|

JSONTABLE(json_content,[jsonpath])

For each record in the recordset of the preceding table expression, returns one record for each instance of a key in a JSON array (json_content) that matches the key(s) specified in the WITH clause, at the scope specified by the "jsonpath" input.

json_content: A JSON "table" (array of objects). The contents can nest, but this must be a single JSON array, not any other JSON structure, at the root level.
- The values of every instance of the key(s) provided in the WITH clause are retrievable only for substructures which are immediate children of the root-level JSON array.
jsonpath: An optional JSONPath query defining the scope, within the json_content array, that you want to pull content from. The JSON key(s) identified in the WITH clause must exist at the scope defined in this parameter. This defaults to the JSON root ($).

Consider a sample table with a single record, including an ID column and column with JSON content called "JSONColumn" with the following content:

[
	{
		"name": "Samuel",
		"email": "sam@gmail.com",
		"extrainfo": {
			"city": "Seattle"
		}
	},
	{
		"name": "Katherine",
		"email": "kat@gmail.com",
	},
	{
		"name": "George",
		"email": "george23@gmail.com",
	},
	{
		"name": "Carlos",
		"email": "carlos32@gmail.com",
	}
]

To extract all values for a certain key, specify the scope in the JSONTABLE function and provide the desired key(s) in the WITH clause.

SELECT A.ID, X.name FROM [TableWithJSONField] A CROSS APPLY JSONTABLE(A.JSONColumn) WITH (name VARCHAR(255)) AS X

-- Results: 
|ID|name|
---------
|1 |Samuel|
|1 |Katherine|
|1 |George|
|1 |Carlos|

XMLTABLE(xml_content,[xpath,child_type])

For each record in the resultset of the preceding table expression, returns one record for each of the elements and/or attributes in an XML structure (xml_content) that match the tag name(s) and/or attribute name(s) specified in the WITH clause, at the scope specified in the "xpath" input.

xml_content: A column containing an XML structure.
xpath: An optional XPath that specifies the scope within the XML structure at which the connector extracts content matching the tag/attribute name(s) specified in the WITH clause.
- When extracting the content of sub-elements, the connector can retrieve all content from tags at the root level, (depth 0) immediate children of the root (depth 1), and children of those children (depth 2).
- When extracting element attribute content, the connector can retrieve all content from tags containing the specified attribute at the root level (depth 0) and from immediate children of root-level elements (depth 1).
child_type: An optional parameter that specifies the part(s) of the parent element (specified in the xpath input) that the column(s) provided in the WITH clause are checked against to identify content.
- You can supply the following values:
  - 0: The column(s) in the WITH clause are checked for matches against the parent element's attribute names and sub-element tag names.
  - 1: The column(s) in the WITH clause are checked for matches against the parent element's attribute names.
  - 2: The column(s) in the WITH clause are checked for matches against the parent element's sub-element tag names.
- When not supplied, this defaults to 0.

Extracting Sub-Element Values

Consider a sample table with a single record, including an ID column and a column with XML content called "XMLContent" with the following content:

<shoppingList>
    <item>
        <name>Apples</name>
        <quantity>3</quantity>
        <unit>Kg</unit>
    </item>
    <item>
        <name>Bread</name>
        <quantity>2</quantity>
        <unit>Loaf</unit>
		<extrainfo>
			<Type>Whole-Grain</Type>
		</extrainfo>
    </item>
    <item>
        <name>Milk</name>
        <quantity>1</quantity>
        <unit>Carton</unit>
    </item>
    <item>
        <name>Eggs</name>
        <quantity>12</quantity>
        <unit></unit>
    </item>
</shoppingList>

To extract sub-element content, specify the scope in the XMLTABLE function and provide the desired element name(s) in the WITH clause. Note that this will not work if the XMLTABLE function's child_type input is set to 1.

SELECT A.ID, X.name FROM [TableWithXMLField] A CROSS APPLY XMLTABLE(A.XMLContent,'//*/item') WITH (name VARCHAR(255)) AS X

-- Results: 
|ID|name|
---------
|1|Apples|
|1|Bread|
|1|Milk|
|1|Eggs|

Extracting Values Using Element Tag Attributes

Suppose you have this sample table with a single record, including an ID column and a column with XML content called "XMLContent" with the following content:

<restaurant>
  <dish type="appetizer">
    <name lang="en">Caprese Salad</name>
    <chef>Chef Giovanni</chef>
    <price currency="USD">9.99</price>
  </dish>
  <dish type="main-course">
    <name lang="fr">Boeuf Bourguignon</name>
    <chef>Chef Marie</chef>
    <price currency="EUR">19.99</price>
  </dish>
  <dish type="dessert">
    <name lang="es">Tres Leches Cake</name>
    <chef>Chef Alejandro</chef>
    <price currency="MXN">89.99</price>
  </dish>
</restaurant>

To extract attribute content, specify the scope in the XMLTABLE function and provide the desired attribute name(s) in the WITH clause. Note that this will not work if the XMLTABLE function's child_type input is set to 2.

SELECT A.ID, X.type FROM [TableWithXMLField] A CROSS APPLY XMLTABLE(A.XMLContent,'//*/dish') WITH (type VARCHAR(255)) AS X

-- Results: 
|ID|type|
---------
|1|appetizer|
|1|main-course|
|1|dessert|

CSVTABLE(csv_content,[delimiter])

For each record in the resultset of the preceding table expression, reads from a column that contains a CSV table (csv_content) and for each record in that CSV table, returns one record containing the value of the CSV column(s) specified in the WITH clause.

csv_content: A column containing a CSV table.
delimiter: An optional custom delimiter (instead of a comma) which splits the CSV content contained in the csv_content input.

Consider a sample table with a single record, including an ID column and a column containing CSV table called "CSVContent" with the following content:

Name;Category;Price
Apple;Fruit;0.99
Spaghetti;Pasta;5.49
Chicken Breast;Meat;8.99
Broccoli;Vegetable;2.49

To select every value in the "Name" column and account for the custom delimiter (;):

SELECT A.ID, X.Name FROM [TableWithCSVField] A CROSS APPLY CSVTABLE(A.CSVContent,';') WITH (Name VARCHAR(255)) AS X

-- Results:
|ID|Name|
-----------
|1|Apple|
|1|Spaghetti|
|1|Chicken Breast|
|1|Broccoli|

CACHE Statements

When caching is enabled, CACHE statements provide complete control over the data that is cached and the table to which it is cached. The CACHE statement executes the SELECT statement specified and caches its results to a table with the same name in the cache database or to table specified in <cached_table_name>. The connector updates or inserts rows to the cache depending on whether or not they already exist in the cache, so the primary key, which is used to identify existing rows, must be included in the selected columns.

See Caching Data for more information on different caching strategies.

CACHE Statement Syntax

The cache statement may include the following options that alter its behavior:

CACHE [ <cached_table_name> ] [ WITH TRUNCATE | AUTOCOMMIT | SCHEMA ONLY | DROP EXISTING | ALTER SCHEMA ] <select_statement>

WITH TRUNCATE

If this option is set, the connector removes existing rows in the cache table before adding the selected rows. Use this option if you want to refresh the entire cache table but keep its existing schema.

AUTOCOMMIT

If this option is set, the connector commits each row individually. Use this option if you want to ignore the rows that could not be cached due to some reason. By default, the entire result set is cached as a single transaction.

DROP EXISTING

If this option is set, the connector drops the existing cache table before caching the new results. Use this option if you want to refresh the entire cache table, including its schema.

SCHEMA ONLY

If this option is set, the connector creates the cache table based on the SELECT statement without executing the query.

ALTER SCHEMA

If this option is set, the connector alters the schema of the existing table in the cache if it does not match the schema of the SELECT statement. This option results in new columns or dropped columns, if the schema of the SELECT statement does not match the cached table.

Common Queries

Use the following cache statement to cache all rows of a table:

CACHE SELECT * FROM Company

Use the following cache statement to cache all rows of a table into the cache table CachedCompany:

CACHE CachedCompany SELECT * FROM Company

Use the following cache statement for incremental caching. The DateModified column may not exist in all tables. The cache statement shows how incremental caching would work if there were such a column. Also, notice that, in this case, the WITH TRUNCATE and DROP EXISTING options are specifically omitted, which would have deleted all existing rows.

CACHE CachedCompany SELECT * FROM Company WHERE DateModified > '2013-04-04'

Use the following cache statements to create a table with all available columns that will then cache only a few of them. The sequence of statements cache only Name and Address even though the cache table CachedCompany has all the columns in Company.

CACHE CachedCompany SCHEMA ONLY SELECT * FROM Company
CACHE CachedCompany SELECT Name, Address FROM Company

EXECUTE Statements

To execute stored procedures, you can use EXECUTE or EXEC statements.

EXEC and EXECUTE assign stored procedure inputs, referenced by name, to values or parameter names.

Stored Procedure Syntax

To execute a stored procedure as an SQL statement, use the following syntax:

 
{ EXECUTE | EXEC } <stored_proc_name> 
{
  [ @ ] <input_name> = <expression>
} [ , ... ]

<expression> ::=
  | @ <parameter> 
  | ?
  | <literal>

Example Statements

Reference stored procedure inputs by name:

EXECUTE my_proc @second = 2, @first = 1, @third = 3;

Execute a parameterized stored procedure statement:

EXECUTE my_proc second = @p1, first = @p2, third = @p3;

PIVOT and UNPIVOT

PIVOT and UNPIVOT can be used to change a table-valued expression into another table.

PIVOT

PIVOT rotates a table-value expression by turning unique values from one column into multiple columns in the output. PIVOT can run aggregations where required on any column value.

PIVOT Synax

 
"SELECT 'AverageCost' AS Cost_Sorted_By_Production_Days, [0], [1], [2], [3], [4]
FROM
(
SELECT DaysToManufacture, StandardCost
FROM Production.Product
) AS SourceTable
PIVOT
(
AVG(StandardCost)
FOR DaysToManufacture IN ([0], [1], [2], [3], [4])
) AS PivotTable;"

UNPIVOT

UNPIVOT carries out nearly the opposite to PIVOT by rotating columns of a table-valued expressions into column values.

UNPIVOT Sytax

 
"SELECT VendorID, Employee, Orders
FROM
(SELECT VendorID, Emp1, Emp2, Emp3, Emp4, Emp5
FROM pvt) p
UNPIVOT
(Orders FOR Employee IN
(Emp1, Emp2, Emp3, Emp4, Emp5)
)AS unpvt;"

For further information on PIVOT and UNPIVOT, see FROM clause plus JOIN, APPLY, PIVOT (Transact-SQL)

Data Model

Overview

This section shows the available API objects and provides more information on executing SQL to Tally APIs.

Key Features

The connector models Tally entities like documents, folders, and groups as relational views, allowing you to write SQL to query Tally data.
Stored procedures allow you to execute operations to Tally
Live connectivity to these objects means any changes to your Tally account are immediately reflected when using the connector.

Views

Views describes the available views. Views are statically defined to entities such as Company, Employees, and Ledgers.

Stored Procedures

Stored Procedures are function-like interfaces to Tally. Stored procedures allow you to execute operations to Tally, including downloading documents and moving envelopes.

Views

Views are similar to tables in the way that data is represented; however, views are read-only.

Queries can be executed against a view as if it were a normal table.

CData Python Connector for Tally Views


Name	Description
Company	Retrieve Company Details.
Employees	Retrieve Employee Details.
Ledger	Retrieve Ledger Details.
Payhead	Retrieve Payhead Details.
PriceList	Retrieve PriceList.
Report_BalanceSheet	Balance Sheet Report of Tally
Report_BankGroupSummary	Bank Group Summary Report of Tally
Report_BillsPayable	Bills Payable Report of Tally
Report_BillsReceivable	Bills Receivable Report of Tally
Report_GodownSummary	Godown Summary Report of Tally
Report_GroupOutstandings	Group Outstandings Report of Tally
Report_GroupSummary	Group Summary Report of Tally
Report_GroupVouchers	Group Vouchers Report of Tally
Report_ItemMonthlySummary	ItemMonthlySummary Report of Tally
Report_LedgerOutstandings	Ledger Outstandings Report of Tally
Report_LedgerVouchers	Ledger Vouchers Report of Tally
Report_NegativeLedger	Negative Ledger Report of Tally
Report_NegativeStock	Negative Stock Report of Tally
Report_ProfitAndLoss	Profit and Loss Report of Tally
Report_RatioAnalysis	Ratio Analysis Report of Tally
Report_Statistics	Statistics Report of Tally
Report_StockGroupSummary	Stock Summary Report of Tally
Report_StockItemSummary	Stock Summary Report of Tally
Report_StockVouchers	StockVouchers Report of Tally
Report_TrialBalance	Trial Balance Report of Tally
Report_VoucherRegister	Voucher Register Report of Tally
StockItem	Retrieve StockItems.

Company

Retrieve Company Details.

Table Specific Information

Select

The connector will use the Tally API to process WHERE clause conditions built with the following column and operator. The rest of the filter is executed client side within the connector.

String supports the '=, !=,<, <=, >, >=, LIKE, ORDER BY' comparisons.

For example these queries are processed server side:

SELECT * FROM Company WHERE Name LIKE 'cdata%'

SELECT * FROM Company WHERE CompanyFBTAssesseeType != 'Default'

SELECT * FROM Company WHERE StateName = 'Karnataka' AND PINCode >= '560034'

SELECT * FROM Company WHERE CountryName = 'India' OR CountryName = 'US'

SELECT * FROM Company WHERE PINCode > '560034'

SELECT * FROM Company ORDER BY DBName ASC

Columns


Name	Type	Description
StartingFrom	Date	The StartingFrom value of the Company.
BooksFrom	Date	The BooksFrom value of the Company.
VatApplDate	Date	The VatApplDate value of the Company.
CompositeApplicableDate	Date	The CompositeApplicableDate value of the Company.
VATRegDate	Date	The VATRegDate value of the Company.
DeactivateExciseFrom	Date	The DeactivateExciseFrom value of the Company.
STRegDate	Date	The STRegDate value of the Company.
DeactivateServiceTaxFrom	Date	The DeactivateServiceTaxFrom value of the Company.
LBTRegnDate	Date	The LBTRegnDate value of the Company.
DeactivateVATFrom	Date	The DeactivateVATFrom value of the Company.
CSTApplDate	Date	The CSTApplDate value of the Company.
GSTApplicableDate	Date	The GSTApplicableDate value of the Company.
AuditedUpto	Date	The AuditedUpto value of the Company.
FIFOApplicableFrom	Date	The FIFOApplicableFrom value of the Company.
ReturnsStartFrom	Date	The ReturnsStartFrom value of the Company.
Name	String	The Name value of the Company.
BasicCompanyFormalName	String	The BasicCompanyFormalName value of the Company.
Guid	String	The Guid value of the Company.
Email	String	The Email value of the Company.
StateName	String	The StateName value of the Company.
PINCode	String	The PINCode value of the Company.
PhoneNumber	String	The PhoneNumber value of the Company.
CMPEmployerId	String	The CMPEmployerId value of the Company.
FaxNumber	String	The FaxNumber value of the Company.
Website	String	The Website value of the Company.
IncomeTaxNumber	String	The IncomeTaxNumber value of the Company.
SalesTaxNumber	String	The SalesTaxNumber value of the Company.
InterStateSTNumber	String	The InterStateSTNumber value of the Company.
TANumber	String	The TANumber value of the Company.
VATTINNumber	String	The VATTINNumber value of the Company.
CompositeTIN	String	The CompositeTIN value of the Company.
EECDebtors	String	The EECDebtors value of the Company.
EECCreditors	String	The EECCreditors value of the Company.
CountryName	String	The CountryName value of the Company.
VATPymtPeriod	String	The VATPymtPeriod value of the Company.
CSTPymtPeriod	String	The CSTPymtPeriod value of the Company.
STPymtPeriod	String	The STPymtPeriod value of the Company.
TDSPymtPeriod	String	The TDSPymtPeriod value of the Company.
TCSPymtPeriod	String	The TCSPymtPeriod value of the Company.
PFPymtPeriod	String	The PFPymtPeriod value of the Company.
PTPymtPeriod	String	The PTPymtPeriod value of the Company.
ESIPymtPeriod	String	The ESIPymtPeriod value of the Company.
FBTPymtPeriod	String	The FBTPymtPeriod value of the Company.
FBTYearEndPymtPeriod	String	The FBTYearEndPymtPeriod value of the Company.
ITDeductorWard	String	The ITDeductorWard value of the Company.
ITDeductorRespPersonName	String	The ITDeductorRespPersonName value of the Company.
ITDeductorRespPersonFatherName	String	The ITDeductorRespPersonFatherName value of the Company.
ITDeductorRespPersonDesig	String	The ITDeductorRespPersonDesig value of the Company.
TANRegNo	String	The TANRegNo value of the Company.
VATFilingPeriodicity	String	The VATFilingPeriodicity value of the Company.
ITDeductorBranch	String	The ITDeductorBranch value of the Company.
ExciseRegn	String	The ExciseRegn value of the Company.
ExciseRange	String	The ExciseRange value of the Company.
ExciseRangeAddress	String	The ExciseRangeAddress value of the Company.
ExciseDivision	String	The ExciseDivision value of the Company.
ExciseDivisionAddress	String	The ExciseDivisionAddress value of the Company.
CMPIECCode	String	The CMPIECCode value of the Company.
ExciseAssesseeType	String	The ExciseAssesseeType value of the Company.
ExciseCommissionerate	String	The ExciseCommissionerate value of the Company.
ExciseRangeCode	String	The ExciseRangeCode value of the Company.
ExciseDivisionCode	String	The ExciseDivisionCode value of the Company.
ExciseFocalBankCode	String	The ExciseFocalBankCode value of the Company.
ExciseFocalBankName	String	The ExciseFocalBankName value of the Company.
ExciseFocalBankAddr	String	The ExciseFocalBankAddr value of the Company.
STRegNumber	String	The STRegNumber value of the Company.
STAssesseeCode	String	The STAssesseeCode value of the Company.
STOrgType	String	The STOrgType value of the Company.
STMajorService	String	The STMajorService value of the Company.
STDivisionCode	String	The STDivisionCode value of the Company.
STDivisionName	String	The STDivisionName value of the Company.
STRangeCode	String	The STRangeCode value of the Company.
STRangeName	String	The STRangeName value of the Company.
STCommrtCode	String	The STCommrtCode value of the Company.
STCommrtName	String	The STCommrtName value of the Company.
STFocalBankCode	String	The STFocalBankCode value of the Company.
STFocalBankName	String	The STFocalBankName value of the Company.
STFocalBankAddr	String	The STFocalBankAddr value of the Company.
STAdjExpenses	String	The STAdjExpenses value of the Company.
STLargeTaxPayerUnit	String	The STLargeTaxPayerUnit value of the Company.
STPremisesCodeNo	String	The STPremisesCodeNo value of the Company.
ServiceTaxLiabilityType	String	The ServiceTaxLiabilityType value of the Company.
RevChargeType	String	The RevChargeType value of the Company.
DeductorWard	String	The DeductorWard value of the Company.
DeductorStatus	String	The DeductorStatus value of the Company.
DeductorRespPersonName	String	The DeductorRespPersonName value of the Company.
DeductorRespPersonDesig	String	The DeductorRespPersonDesig value of the Company.
DeductorRespPersonFatherName	String	The DeductorRespPersonFatherName value of the Company.
HeadOfficeTANumber	String	The HeadOfficeTANumber value of the Company.
TDSDeductorType	String	The TDSDeductorType value of the Company.
PersonResponsiblePAN	String	The PersonResponsiblePAN value of the Company.
PersonResponsibleFlatNo	String	The PersonResponsibleFlatNo value of the Company.
PersonResponsiblePremises	String	The PersonResponsiblePremises value of the Company.
PersonResponsibleRoad	String	The PersonResponsibleRoad value of the Company.
PersonResponsibleArea	String	The PersonResponsibleArea value of the Company.
PersonResponsibleCity	String	The PersonResponsibleCity value of the Company.
PersonResponsibleState	String	The PersonResponsibleState value of the Company.
PersonResponsiblePincode	String	The PersonResponsiblePincode value of the Company.
PersonResponsibleMobile	String	The PersonResponsibleMobile value of the Company.
PersonResponsibleSTDCode	String	The PersonResponsibleSTDCode value of the Company.
PersonResponsiblePhone	String	The PersonResponsiblePhone value of the Company.
PersonResponsibleEMail	String	The PersonResponsibleEMail value of the Company.
PersonResponsibleAltSTDCode	String	The PersonResponsibleAltSTDCode value of the Company.
PersonResponsibleAltPhone	String	The PersonResponsibleAltPhone value of the Company.
PersonResponsibleAltEMail	String	The PersonResponsibleAltEMail value of the Company.
PersonResponsibleAltMobile	String	The PersonResponsibleAltMobile value of the Company.
DeductorResponsibleAltSTDCode	String	The DeductorResponsibleAltSTDCode value of the Company.
DeductorResponsibleAltPhone	String	The DeductorResponsibleAltPhone value of the Company.
DeductorResponsibleAltEMail	String	The DeductorResponsibleAltEMail value of the Company.
DeductorResponsibleAltMobile	String	The DeductorResponsibleAltMobile value of the Company.
ITDeductorRespPersonPAN	String	The ITDeductorRespPersonPAN value of the Company.
DeductorBranch	String	The DeductorBranch value of the Company.
CompanyFBTAssesseeType	String	The CompanyFBTAssesseeType value of the Company.
CompanyFBTAssesseeCategory	String	The CompanyFBTAssesseeCategory value of the Company.
CMPPFCode	String	The CMPPFCode value of the Company.
CMPPFAccountGroupCode	String	The CMPPFAccountGroupCode value of the Company.
CMPPFSecurityCode	String	The CMPPFSecurityCode value of the Company.
CMPESICode	String	The CMPESICode value of the Company.
CMPESIBranchOffice	String	The CMPESIBranchOffice value of the Company.
CMPESIWorkingDays	String	The CMPESIWorkingDays value of the Company.
XBRLCIN	String	The XBRLCIN value of the Company.
XBRLIndustryType	String	The XBRLIndustryType value of the Company.
LBTRegnNo	String	The LBTRegnNo value of the Company.
LBTZone	String	The LBTZone value of the Company.
EconomicActivityCode	String	The EconomicActivityCode value of the Company.
AuthorisedPersonName	String	The AuthorisedPersonName value of the Company.
AuthorisedPersonDesignation	String	The AuthorisedPersonDesignation value of the Company.
AuthorisedPlace	String	The AuthorisedPlace value of the Company.
CircleSector	String	The CircleSector value of the Company.
CircleDivision	String	The CircleDivision value of the Company.
ExportImportCode	String	The ExportImportCode value of the Company.
TaxAuthorisedPerson	String	The TaxAuthorisedPerson value of the Company.
CircleWard	String	The CircleWard value of the Company.
VATReturnForm	String	The VATReturnForm value of the Company.
GSTRegistrationNumber	String	The GSTRegistrationNumber value of the Company.
GSTRegistrationType	String	The GSTRegistrationType value of the Company.
CmpTypeOfSupply	String	The CmpTypeOfSupply value of the Company.
CompanyNameNative	String	The CompanyNameNative value of the Company.
CompanyEmirateNative	String	The CompanyEmirateNative value of the Company.
CompanyCountryNative	String	The CompanyCountryNative value of the Company.
VATDealerType	String	The VATDealerType value of the Company.
ConnectName	String	The ConnectName value of the Company.
SMSShortCode	String	The SMSShortCode value of the Company.
SMSPrefix	String	The SMSPrefix value of the Company.
CompanyContactPerson	String	The CompanyContactPerson value of the Company.
CompanyContactNumber	String	The CompanyContactNumber value of the Company.
CompanySMSName	String	The CompanySMSName value of the Company.
LogoPath	String	The LogoPath value of the Company.
CompanyChequeName	String	The CompanyChequeName value of the Company.
TDSNatureOfPayment	String	The TDSNatureOfPayment value of the Company.
TCSNatureofGood	String	The TCSNatureofGood value of the Company.
CRNumber	String	The CRNumber value of the Company.
BranchCRNumber	String	The BranchCRNumber value of the Company.
ShowBankDetails	String	The ShowBankDetails value of the Company.
GenerateBatchesOn	String	The GenerateBatchesOn value of the Company.
UploadLastRefresh	String	The UploadLastRefresh value of the Company.
IsAggregate	String	The IsAggregate value of the Company.
IndianVat	String	The IndianVat value of the Company.
IsVATRegdDealer	String	The IsVATRegdDealer value of the Company.
IsVATCompositeDealer	String	The IsVATCompositeDealer value of the Company.
IsDaywiseCashAggregate	String	The IsDaywiseCashAggregate value of the Company.
ITDeductorType	String	The ITDeductorType value of the Company.
IsAuditWorkingPaperOn	String	The IsAuditWorkingPaperOn value of the Company.
IsAuditCategoryOn	String	The IsAuditCategoryOn value of the Company.
IsRoundOffExceOn	String	The IsRoundOffExceOn value of the Company.
IsCSTWithAddlTax	String	The IsCSTWithAddlTax value of the Company.
IsSalesTaxCessOn	String	The IsSalesTaxCessOn value of the Company.
IsExciseClassificationOn	String	The IsExciseClassificationOn value of the Company.
STIsSTLargeTaxPayer	String	The STIsSTLargeTaxPayer value of the Company.
STXIsRoundOffApplicable	String	The STXIsRoundOffApplicable value of the Company.
ServiceTaxIsSEZ	String	The ServiceTaxIsSEZ value of the Company.
STIsMultiUnit	String	The STIsMultiUnit value of the Company.
STUserDefinedClass	String	The STUserDefinedClass value of the Company.
STIsInputServDistributor	String	The STIsInputServDistributor value of the Company.
IsSTStockItemOn	String	The IsSTStockItemOn value of the Company.
IsReverseApplicable	String	The IsReverseApplicable value of the Company.
STIsMonthlyReturns	String	The STIsMonthlyReturns value of the Company.
DeductorType	String	The DeductorType value of the Company.
IgnoreITExemption	String	The IgnoreITExemption value of the Company.
IgnoreTCSITExemption	String	The IgnoreTCSITExemption value of the Company.
IsTDSStockItemOn	String	The IsTDSStockItemOn value of the Company.
IsFBTSurchargeApplicable	String	The IsFBTSurchargeApplicable value of the Company.
XBRLIsConsolidatedRepType	String	The XBRLIsConsolidatedRepType value of the Company.
IsLBTOn	String	The IsLBTOn value of the Company.
IsVATClassOn	String	The IsVATClassOn value of the Company.
IsMRPOn	String	The IsMRPOn value of the Company.
IsRevisedAnnexureOn	String	The IsRevisedAnnexureOn value of the Company.
EnableVATOnItemRate	String	The EnableVATOnItemRate value of the Company.
EnableVATOnQuantity	String	The EnableVATOnQuantity value of the Company.
IsInZRBasicServices	String	The IsInZRBasicServices value of the Company.
IsDesignatedZone	String	The IsDesignatedZone value of the Company.
STMaintainSepAccForExempt	String	The STMaintainSepAccForExempt value of the Company.
IsDeviceDetailsReq	String	The IsDeviceDetailsReq value of the Company.
CMPIsUnderNPVScheme	String	The CMPIsUnderNPVScheme value of the Company.
IsSecurityOn	String	The IsSecurityOn value of the Company.
IsAccountingOn	String	The IsAccountingOn value of the Company.
IsInventoryOn	String	The IsInventoryOn value of the Company.
IsIntegrated	String	The IsIntegrated value of the Company.
IsBillWiseOn	String	The IsBillWiseOn value of the Company.
IsAllBillWiseOn	String	The IsAllBillWiseOn value of the Company.
IsCostCentresOn	String	The IsCostCentresOn value of the Company.
IsCostCategoryOn	String	The IsCostCategoryOn value of the Company.
IsStockCategoryOn	String	The IsStockCategoryOn value of the Company.
IsBatchWiseOn	String	The IsBatchWiseOn value of the Company.
IsPerishableOn	String	The IsPerishableOn value of the Company.
IsMultiGodownOn	String	The IsMultiGodownOn value of the Company.
IsMultiCurrencyOn	String	The IsMultiCurrencyOn value of the Company.
IsInvoicingOn	String	The IsInvoicingOn value of the Company.
IsRevJrnlOn	String	The IsRevJrnlOn value of the Company.
IsRemindersOn	String	The IsRemindersOn value of the Company.
IsDCNoteOn	String	The IsDCNoteOn value of the Company.
IsRejectionOn	String	The IsRejectionOn value of the Company.
IsTrackingOn	String	The IsTrackingOn value of the Company.
IsExciseOn	String	The IsExciseOn value of the Company.
IsChqPrintingOn	String	The IsChqPrintingOn value of the Company.
DiffActualQty	String	The DiffActualQty value of the Company.
UseZeroEntries	String	The UseZeroEntries value of the Company.
AddlAmount	String	The AddlAmount value of the Company.
IsTallyAuditOn	String	The IsTallyAuditOn value of the Company.
IsBudgetsOn	String	The IsBudgetsOn value of the Company.
IsPayrollOn	String	The IsPayrollOn value of the Company.
IsTDSOn	String	The IsTDSOn value of the Company.
IsServiceTaxOn	String	The IsServiceTaxOn value of the Company.
IsJobCostingOn	String	The IsJobCostingOn value of the Company.
IsTCSOn	String	The IsTCSOn value of the Company.
IsExciseReportsOn	String	The IsExciseReportsOn value of the Company.
IsCompositeDealer	String	The IsCompositeDealer value of the Company.
IsBOMOn	String	The IsBOMOn value of the Company.
IsSalesOrdersOn	String	The IsSalesOrdersOn value of the Company.
IsPurcOrdersOn	String	The IsPurcOrdersOn value of the Company.
IsDiscountsOn	String	The IsDiscountsOn value of the Company.
CNoteAsInvoice	String	The CNoteAsInvoice value of the Company.
UKVATReturns	String	The UKVATReturns value of the Company.
UsePriceLevels	String	The UsePriceLevels value of the Company.
IsInterestOn	String	The IsInterestOn value of the Company.
IsAdvInterestOn	String	The IsAdvInterestOn value of the Company.
PurcAsInvoice	String	The PurcAsInvoice value of the Company.
UseAutoCost	String	The UseAutoCost value of the Company.
DNoteAsInvoice	String	The DNoteAsInvoice value of the Company.
PLasIncomeExpense	String	The PLasIncomeExpense value of the Company.
AllowinMobile	String	The AllowinMobile value of the Company.
IsIndentOn	String	The IsIndentOn value of the Company.
IsFBTOn	String	The IsFBTOn value of the Company.
IsExciseMfgrTraderOn	String	The IsExciseMfgrTraderOn value of the Company.
IsSalesTaxOn	String	The IsSalesTaxOn value of the Company.
IsPayrollStatOn	String	The IsPayrollStatOn value of the Company.
ConnectCompany	String	The ConnectCompany value of the Company.
ConnectCompanyOnLoad	String	The ConnectCompanyOnLoad value of the Company.
IsEntryTaxApplicable	String	The IsEntryTaxApplicable value of the Company.
RevenueLedForOpBal	String	The RevenueLedForOpBal value of the Company.
EnableSMSAccess	String	The EnableSMSAccess value of the Company.
IsRcptsPymtsOn	String	The IsRcptsPymtsOn value of the Company.
IsLogoEnabled	String	The IsLogoEnabled value of the Company.
IsXBRLOn	String	The IsXBRLOn value of the Company.
IsProprietorship	String	The IsProprietorship value of the Company.
IsYearWise	String	The IsYearWise value of the Company.
IsCmpLTUOn	String	The IsCmpLTUOn value of the Company.
IsGSTOn	String	The IsGSTOn value of the Company.
IsGSTClassifOn	String	The IsGSTClassifOn value of the Company.
IsDisallowInEduMode	String	The IsDisallowInEduMode value of the Company.
IsMultiAddressOn	String	The IsMultiAddressOn value of the Company.
IsEbankingOn	String	The IsEbankingOn value of the Company.
IsJobWorkOn	String	The IsJobWorkOn value of the Company.
IsMaterialTransferOn	String	The IsMaterialTransferOn value of the Company.
IsCostTrackingOn	String	The IsCostTrackingOn value of the Company.
EnablePwdPolicy	String	The EnablePwdPolicy value of the Company.
RestrictPwdReuse	String	The RestrictPwdReuse value of the Company.
ResetPwdOnFirstLogin	String	The ResetPwdOnFirstLogin value of the Company.
AllowPwdReset	String	The AllowPwdReset value of the Company.
NotifyOfExpiry	String	The NotifyOfExpiry value of the Company.
IsDefPwdPolicyAltered	String	The IsDefPwdPolicyAltered value of the Company.
IsBankingVchMigrated	String	The IsBankingVchMigrated value of the Company.
IsBeneficiaryCodeOn	String	The IsBeneficiaryCodeOn value of the Company.
IsTransferModeOn	String	The IsTransferModeOn value of the Company.
IsBankingforCCOn	String	The IsBankingforCCOn value of the Company.
IsImpBankDetailsOn	String	The IsImpBankDetailsOn value of the Company.
IsApprovalOn	String	The IsApprovalOn value of the Company.
IsExportOnVchCreate	String	The IsExportOnVchCreate value of the Company.
IsExportWithErrors	String	The IsExportWithErrors value of the Company.
IsResetBankStatus	String	The IsResetBankStatus value of the Company.
IsISOCurrencyApplicable	String	The IsISOCurrencyApplicable value of the Company.
IsIgnoreWithWarnings	String	The IsIgnoreWithWarnings value of the Company.
IsFIFOApplied	String	The IsFIFOApplied value of the Company.
IsTrackVouchersOn	String	The IsTrackVouchersOn value of the Company.
ResetTrackedChanges	String	The ResetTrackedChanges value of the Company.
CompanyNumber	Decimal	The CompanyNumber value of the Company.
StatutoryVersion	Decimal	The StatutoryVersion value of the Company.
VATPymtDueDate	Decimal	The VATPymtDueDate value of the Company.
CSTPymtDueDate	Decimal	The CSTPymtDueDate value of the Company.
STPymtDueDate	Decimal	The STPymtDueDate value of the Company.
TDSPymtDueDate	Decimal	The TDSPymtDueDate value of the Company.
TCSPymtDueDate	Decimal	The TCSPymtDueDate value of the Company.
PFPymtDueDate	Decimal	The PFPymtDueDate value of the Company.
PTPymtDueDate	Decimal	The PTPymtDueDate value of the Company.
ESIPymtDueDate	Decimal	The ESIPymtDueDate value of the Company.
FBTPymtDueDate	Decimal	The FBTPymtDueDate value of the Company.
FBTYearEndPymtDueDate	Decimal	The FBTYearEndPymtDueDate value of the Company.
STCrAdjPercent	Decimal	The STCrAdjPercent value of the Company.
CmpTaxAmountTolerence	Decimal	The CmpTaxAmountTolerence value of the Company.
PwdLength	Decimal	The PwdLength value of the Company.
LettersInPwd	Decimal	The LettersInPwd value of the Company.
NumeralsInPwd	Decimal	The NumeralsInPwd value of the Company.
SpclCharsInPwd	Decimal	The SpclCharsInPwd value of the Company.
PwdHistory	Decimal	The PwdHistory value of the Company.
PwdExpiry	Decimal	The PwdExpiry value of the Company.
ExpiryNotifPeriod	Decimal	The ExpiryNotifPeriod value of the Company.
NACHVersion	Decimal	The NACHVersion value of the Company.
MaxCashValue	String	The MaxCashValue value of the Company.
MinCashValue	String	The MinCashValue value of the Company.
CMPESIEligibleAmount	String	The CMPESIEligibleAmount value of the Company.
RTGSLimit	String	The RTGSLimit value of the Company.
Address	String	The Address value of the Company.
CompanyAddressNative	String	The CompanyAddressNative value of the Company.
PriceLevel	String	The PriceLevel value of the Company.
MobileNumbers	String	The MobileNumbers value of the Company.
UserAccountIds	Decimal	The UserAccountIds value of the Company.
Dbname	String	The Dbname value of the Company.
Thisyearbeg	Date	The Thisyearbeg value of the Company.
Thisyearend	Date	The Thisyearend value of the Company.
Prevyearbeg	Date	The Prevyearbeg value of the Company.
Prevyearend	Date	The Prevyearend value of the Company.
Thisquarterbeg	Date	The Thisquarterbeg value of the Company.
Thisquarterend	Date	The Thisquarterend value of the Company.
Prevquarterbeg	Date	The Prevquarterbeg value of the Company.
Prevquarterend	Date	The Prevquarterend value of the Company.
Name	String	The Name value of the Company.
Address1	String	The Address1 value of the Company.
Address2	String	The Address2 value of the Company.
Address3	String	The Address3 value of the Company.
Address4	String	The Address4 value of the Company.
Address5	String	The Address5 value of the Company.

Pseudo-Columns

Pseudo column fields are used in the WHERE clause of SELECT statements and offer more granular control over the data returned from the data source.


Name	Type	Description
Company	String	Name of the Company whose data need to be fetched. Please make sure it is selected and unlocked atleast once in the Tally tool after the tool is launched. It need not be in the selected state at the moment.

Employees

Retrieve Employee Details.

Table Specific Information

Select

The connector will use the Tally API to process WHERE clause conditions built with the following column and operator. The rest of the filter is executed client side within the connector.

String supports the '=, !=,<, <=, >, >=, LIKE, ORDER BY' comparisons.

For example these queries are processed server side:

SELECT * FROM Employees WHERE EMailID LIKE '%cdata%'

SELECT * FROM Employees WHERE BloodGroup != 'A Positive'

SELECT * FROM Employees WHERE Gender = 'Male' AND FatherName >= 'abc'

SELECT * FROM Employees WHERE BankBranch = 'Delhi' OR BankBranch = 'Bangalore'

SELECT * FROM Employees WHERE ForPayroll > 'No'

SELECT * FROM Employees ORDER BY Guid ASC

Columns


Name	Type	Description
Name	String	The Name value of the Employees.
ActiveFrom	Date	The ActiveFrom value of the Employees.
ActiveTo	Date	The ActiveTo value of the Employees.
DateOfBirth	Date	The DateOfBirth value of the Employees.
DateOfJoin	Date	The DateOfJoin value of the Employees.
DeactivationDate	Date	The DeactivationDate value of the Employees.
VisaExpiryDate	Date	The VisaExpiryDate value of the Employees.
ContractStartDate	Date	The ContractStartDate value of the Employees.
ContractExpiryDate	Date	The ContractExpiryDate value of the Employees.
PassportExpiryDate	Date	The PassportExpiryDate value of the Employees.
PFJoiningDate	Date	The PFJoiningDate value of the Employees.
PFRelievingDate	Date	The PFRelievingDate value of the Employees.
IdentityExpiryDate	Date	The IdentityExpiryDate value of the Employees.
Guid	String	The Guid value of the Employees.
Parent	String	The Parent value of the Employees.
Category	String	The Category value of the Employees.
MobileNumber	String	The MobileNumber value of the Employees.
MICRCode	String	The MICRCode value of the Employees.
IFSCode	String	The IFSCode value of the Employees.
Narration	String	The Narration value of the Employees.
RemoteGUID	String	The RemoteGUID value of the Employees.
RemoteAltGUID	String	The RemoteAltGUID value of the Employees.
RequestorRule	String	The RequestorRule value of the Employees.
BankDetails	String	The BankDetails value of the Employees.
BankDetailsBankID	String	The BankDetailsBankID value of the Employees.
Function	String	The Function value of the Employees.
Location	String	The Location value of the Employees.
Designation	String	The Designation value of the Employees.
PFAccountNumber	String	The PFAccountNumber value of the Employees.
PanNumber	String	The PanNumber value of the Employees.
ESINumber	String	The ESINumber value of the Employees.
PassportDetails	String	The PassportDetails value of the Employees.
Gender	String	The Gender value of the Employees.
BloodGroup	String	The BloodGroup value of the Employees.
FatherName	String	The FatherName value of the Employees.
ContactNumbers	String	The ContactNumbers value of the Employees.
EMailID	String	The EMailID value of the Employees.
BankAccountNumber	String	The BankAccountNumber value of the Employees.
BankBranch	String	The BankBranch value of the Employees.
VisaNumber	String	The VisaNumber value of the Employees.
WorkPermitNumber	String	The WorkPermitNumber value of the Employees.
CountryofIssue	String	The CountryofIssue value of the Employees.
SpouseName	String	The SpouseName value of the Employees.
FPFAccountNumber	String	The FPFAccountNumber value of the Employees.
ReasonsForLeaving	String	The ReasonsForLeaving value of the Employees.
ESIDispensaryName	String	The ESIDispensaryName value of the Employees.
EmpDisplayName	String	The EmpDisplayName value of the Employees.
IdentityNumber	String	The IdentityNumber value of the Employees.
PRAccountNumber	String	The PRAccountNumber value of the Employees.
AadharNumber	String	The AadharNumber value of the Employees.
UANNumber	String	The UANNumber value of the Employees.
RevenueLedForOpBal	String	The RevenueLedForOpBal value of the Employees.
IsMstFromSync	String	The IsMstFromSync value of the Employees.
IsUpdatingTargetId	String	The IsUpdatingTargetId value of the Employees.
AsOriginal	String	The AsOriginal value of the Employees.
AffectsStock	String	The AffectsStock value of the Employees.
ForPayroll	String	The ForPayroll value of the Employees.
ForJobCosting	String	The ForJobCosting value of the Employees.
IsEmployeeGroup	String	The IsEmployeeGroup value of the Employees.
SortPosition	Decimal	The SortPosition value of the Employees.
Alterid	Decimal	The Alterid value of the Employees.
RemoteAlterID	Decimal	The RemoteAlterID value of the Employees.
DefaultLanguage	Decimal	The DefaultLanguage value of the Employees.
Address	String	The Address value of the Employees.
MailingName	String	The MailingName value of the Employees.
TargetRemoteId	String	The $TargetRemoteId value of the Employees.

Pseudo-Columns

Pseudo column fields are used in the WHERE clause of SELECT statements and offer more granular control over the data returned from the data source.


Name	Type	Description
Company	String	Name of the Company whose data need to be fetched. Please make sure it is selected and unlocked atleast once in the Tally tool after the tool is launched. It need not be in the selected state at the moment.

Ledger

Retrieve Ledger Details.

Table Specific Information

Select

The connector will use the Tally API to process WHERE clause conditions built with the following column and operator. The rest of the filter is executed client side within the connector.

String supports the '=, !=,<, <=, >, >=, LIKE, ORDER BY' comparisons.

For example these queries are processed server side:

SELECT * FROM Ledger WHERE TaxType LIKE '%GST%'

SELECT * FROM Ledger WHERE GSTType != 'Applicable'

SELECT * FROM Ledger WHERE GSTTypeofSupply = 'Goods' AND GSTDutyHead = 'Central Tax'

SELECT * FROM Ledger WHERE Parent = 'Sales Accounts' OR Parent = 'Bank Accounts'

SELECT * FROM Ledger WHERE IsChequePrintingEnabled > 'No'

SELECT * FROM Ledger ORDER BY Guid Desc

Columns


Name	Type	Description
Name	String	The Name value of the Ledger.
StartingFrom	Date	The StartingFrom value of the Ledger.
STRegDate	Date	The STRegDate value of the Ledger.
LBTRegnDate	Date	The LBTRegnDate value of the Ledger.
SamplingDateOneFactor	Date	The SamplingDateOneFactor value of the Ledger.
SamplingDateTwoFactor	Date	The SamplingDateTwoFactor value of the Ledger.
ActiveFrom	Date	The ActiveFrom value of the Ledger.
ActiveTo	Date	The ActiveTo value of the Ledger.
CreatedDate	Date	The CreatedDate value of the Ledger.
AlteredOn	Date	The AlteredOn value of the Ledger.
VATApplicableDate	Date	The VATApplicableDate value of the Ledger.
ExciseRegistrationDate	Date	The ExciseRegistrationDate value of the Ledger.
PANApplicableFrom	Date	The PANApplicableFrom value of the Ledger.
PayInsRunningFileDate	Date	The PayInsRunningFileDate value of the Ledger.
VATTaxExemptionDate	Date	The VATTaxExemptionDate value of the Ledger.
Guid	String	The Guid value of the Ledger.
CurrencyName	String	The CurrencyName value of the Ledger.
Email	String	The Email value of the Ledger.
StateName	String	The StateName value of the Ledger.
PINCode	String	The PINCode value of the Ledger.
Website	String	The Website value of the Ledger.
IncomeTaxNumber	String	The IncomeTaxNumber value of the Ledger.
SalesTaxNumber	String	The SalesTaxNumber value of the Ledger.
InterStateSTNumber	String	The InterStateSTNumber value of the Ledger.
VATTINNumber	String	The VATTINNumber value of the Ledger.
CountryName	String	The CountryName value of the Ledger.
ExciseRange	String	The ExciseRange value of the Ledger.
ExciseDivision	String	The ExciseDivision value of the Ledger.
ExciseCommissionerate	String	The ExciseCommissionerate value of the Ledger.
LBTRegnNo	String	The LBTRegnNo value of the Ledger.
LBTZone	String	The LBTZone value of the Ledger.
ExportImportCode	String	The ExportImportCode value of the Ledger.
GSTRegistrationType	String	The GSTRegistrationType value of the Ledger.
VATDealerType	String	The VATDealerType value of the Ledger.
PriceLevel	String	The PriceLevel value of the Ledger.
UploadLastRefresh	String	The UploadLastRefresh value of the Ledger.
Parent	String	The Parent value of the Ledger.
SamplingMethod	String	The SamplingMethod value of the Ledger.
SamplingStrOneFactor	String	The SamplingStrOneFactor value of the Ledger.
IFSCode	String	The IFSCode value of the Ledger.
Narration	String	The Narration value of the Ledger.
RemoteGUID	String	The RemoteGUID value of the Ledger.
RemoteAltGUID	String	The RemoteAltGUID value of the Ledger.
RequestorRule	String	The RequestorRule value of the Ledger.
GrpDebitParent	String	The GrpDebitParent value of the Ledger.
GrpCreditParent	String	The GrpCreditParent value of the Ledger.
SysDebitParent	String	The SysDebitParent value of the Ledger.
SysCreditParent	String	The SysCreditParent value of the Ledger.
TDSApplicable	String	The TDSApplicable value of the Ledger.
TCSApplicable	String	The TCSApplicable value of the Ledger.
GSTApplicable	String	The GSTApplicable value of the Ledger.
CreatedBy	String	The CreatedBy value of the Ledger.
AlteredBy	String	The AlteredBy value of the Ledger.
TaxClassificationName	String	The TaxClassificationName value of the Ledger.
TaxType	String	The TaxType value of the Ledger.
BillCreditPeriod	String	The BillCreditPeriod value of the Ledger.
BankDetails	String	The BankDetails value of the Ledger.
BankBranchName	String	The BankBranchName value of the Ledger.
BankBSRCode	String	The BankBSRCode value of the Ledger.
DeducteeType	String	The DeducteeType value of the Ledger.
BusinessType	String	The BusinessType value of the Ledger.
TypeOfNotification	String	The TypeOfNotification value of the Ledger.
MSMERegNumber	String	The MSMERegNumber value of the Ledger.
CountryofResidence	String	The CountryofResidence value of the Ledger.
RelatedPartyId	String	The RelatedPartyId value of the Ledger.
RelPartyIssuingAuthority	String	The RelPartyIssuingAuthority value of the Ledger.
ImporterExporterCode	String	The ImporterExporterCode value of the Ledger.
EMailCC	String	The EMailCC value of the Ledger.
Description	String	The Description value of the Ledger.
LedAddlAllocType	String	The LedAddlAllocType value of the Ledger.
TransporterId	String	The TransporterId value of the Ledger.
LedgerPhone	String	The LedgerPhone value of the Ledger.
LedgerFax	String	The LedgerFax value of the Ledger.
LedgerContact	String	The LedgerContact value of the Ledger.
LedgerMobile	String	The LedgerMobile value of the Ledger.
RelationType	String	The RelationType value of the Ledger.
MailingNameNative	String	The MailingNameNative value of the Ledger.
StateNameNative	String	The StateNameNative value of the Ledger.
CountryNameNative	String	The CountryNameNative value of the Ledger.
BasicTypeOfDuty	String	The BasicTypeOfDuty value of the Ledger.
GSTType	String	The GSTType value of the Ledger.
ExemptionType	String	The ExemptionType value of the Ledger.
AppropriateFor	String	The AppropriateFor value of the Ledger.
SubTaxType	String	The SubTaxType value of the Ledger.
STXNatureOfParty	String	The STXNatureOfParty value of the Ledger.
NameOnPAN	String	The NameOnPAN value of the Ledger.
UsedForTaxType	String	The UsedForTaxType value of the Ledger.
eCommMerchantID	String	The eCommMerchantID value of the Ledger.
PartyGSTIN	String	The PartyGSTIN value of the Ledger.
GSTDutyHead	String	The GSTDutyHead value of the Ledger.
GSTAppropriateTo	String	The GSTAppropriateTo value of the Ledger.
GSTTypeofSupply	String	The GSTTypeofSupply value of the Ledger.
GSTNatureofSupply	String	The GSTNatureofSupply value of the Ledger.
CessValuationMethod	String	The CessValuationMethod value of the Ledger.
PayType	String	The PayType value of the Ledger.
PayslipName	String	The PayslipName value of the Ledger.
AttendanceType	String	The AttendanceType value of the Ledger.
LeaveType	String	The LeaveType value of the Ledger.
CalculationPeriod	String	The CalculationPeriod value of the Ledger.
RoundingMethod	String	The RoundingMethod value of the Ledger.
ComputationType	String	The ComputationType value of the Ledger.
CalculationType	String	The CalculationType value of the Ledger.
PayStatType	String	The PayStatType value of the Ledger.
ProfessionalTaxNumber	String	The ProfessionalTaxNumber value of the Ledger.
UserDefinedCalenderType	String	The UserDefinedCalenderType value of the Ledger.
ITNature	String	The ITNature value of the Ledger.
ITComponent	String	The ITComponent value of the Ledger.
NotificationNumber	String	The NotificationNumber value of the Ledger.
RegistrationNumber	String	The RegistrationNumber value of the Ledger.
ServiceCategory	String	The ServiceCategory value of the Ledger.
AbatementNotificationNo	String	The AbatementNotificationNo value of the Ledger.
STXDutyHead	String	The STXDutyHead value of the Ledger.
STXClassification	String	The STXClassification value of the Ledger.
NotificationSlNo	String	The NotificationSlNo value of the Ledger.
ServiceTaxApplicable	String	The ServiceTaxApplicable value of the Ledger.
ExciseLedgerClassification	String	The ExciseLedgerClassification value of the Ledger.
ExciseRegistrationNumber	String	The ExciseRegistrationNumber value of the Ledger.
ExciseAccountHead	String	The ExciseAccountHead value of the Ledger.
ExciseDutyType	String	The ExciseDutyType value of the Ledger.
ExciseDutyHeadCode	String	The ExciseDutyHeadCode value of the Ledger.
ExciseAllocType	String	The ExciseAllocType value of the Ledger.
ExciseDutyHead	String	The ExciseDutyHead value of the Ledger.
NatureOfSales	String	The NatureOfSales value of the Ledger.
ExciseNotificationNo	String	The ExciseNotificationNo value of the Ledger.
ExciseImportsRegistartionNo	String	The ExciseImportsRegistartionNo value of the Ledger.
ExciseApplicability	String	The ExciseApplicability value of the Ledger.
ExciseTypeofBranch	String	The ExciseTypeofBranch value of the Ledger.
ExciseDefaultRemoval	String	The ExciseDefaultRemoval value of the Ledger.
ExciseNotificationSlNo	String	The ExciseNotificationSlNo value of the Ledger.
TypeOfTariff	String	The TypeOfTariff value of the Ledger.
ExciseRegNo	String	The ExciseRegNo value of the Ledger.
ExciseNatureofPurchase	String	The ExciseNatureofPurchase value of the Ledger.
TDSDeducteeTypeMst	String	The TDSDeducteeTypeMst value of the Ledger.
TdsRateName	String	The TdsRateName value of the Ledger.
TDSDeducteeSectionNumber	String	The TDSDeducteeSectionNumber value of the Ledger.
PANStatus	String	The PANStatus value of the Ledger.
DeducteeReference	String	The DeducteeReference value of the Ledger.
TDSDeducteeType	String	The TDSDeducteeType value of the Ledger.
ITExemptApplicable	String	The ITExemptApplicable value of the Ledger.
TaxIdentificationNo	String	The TaxIdentificationNo value of the Ledger.
LedgerFBTCategory	String	The LedgerFBTCategory value of the Ledger.
BranchCode	String	The BranchCode value of the Ledger.
ClientCode	String	The ClientCode value of the Ledger.
BankingConfigBank	String	The BankingConfigBank value of the Ledger.
BankingConfigBankID	String	The BankingConfigBankID value of the Ledger.
BankAccHolderName	String	The BankAccHolderName value of the Ledger.
UseForPOSType	String	The UseForPOSType value of the Ledger.
PaymentGateway	String	The PaymentGateway value of the Ledger.
TypeOfInterestOn	String	The TypeOfInterestOn value of the Ledger.
BankConfigIFSC	String	The BankConfigIFSC value of the Ledger.
BankConfigMICR	String	The BankConfigMICR value of the Ledger.
BankConfigShortCode	String	The BankConfigShortCode value of the Ledger.
PymtInstoutputName	String	The PymtInstoutputName value of the Ledger.
ProductCodeType	String	The ProductCodeType value of the Ledger.
SalaryPymtProductCode	String	The SalaryPymtProductCode value of the Ledger.
OtherPymtProductCode	String	The OtherPymtProductCode value of the Ledger.
PaymentInstLocation	String	The PaymentInstLocation value of the Ledger.
EncrptionLocation	String	The EncrptionLocation value of the Ledger.
NewIMFLocation	String	The NewIMFLocation value of the Ledger.
ImportedIMFLocation	String	The ImportedIMFLocation value of the Ledger.
BankNewStatements	String	The BankNewStatements value of the Ledger.
BankImportedStatements	String	The BankImportedStatements value of the Ledger.
BankMICR	String	The BankMICR value of the Ledger.
CorporateUserNoECS	String	The CorporateUserNoECS value of the Ledger.
CorporateUserNoACH	String	The CorporateUserNoACH value of the Ledger.
CorporateUserName	String	The CorporateUserName value of the Ledger.
IMFName	String	The IMFName value of the Ledger.
PayInsBatchName	String	The PayInsBatchName value of the Ledger.
LastUsedBatchName	String	The LastUsedBatchName value of the Ledger.
PayInsFileNumPeriod	String	The PayInsFileNumPeriod value of the Ledger.
EncryptedBy	String	The EncryptedBy value of the Ledger.
EncryptedId	String	The EncryptedId value of the Ledger.
ISOCurrencyCode	String	The ISOCurrencyCode value of the Ledger.
BankCapsuleID	String	The BankCapsuleID value of the Ledger.
SalesTaxCessApplicable	String	The SalesTaxCessApplicable value of the Ledger.
BankIBAN	String	The BankIBAN value of the Ledger.
VATTaxExemptionNature	String	The VATTaxExemptionNature value of the Ledger.
VATTaxExemptionNumber	String	The VATTaxExemptionNumber value of the Ledger.
LedStateName	String	The LedStateName value of the Ledger.
VATApplicable	String	The VATApplicable value of the Ledger.
PartyBusinessType	String	The PartyBusinessType value of the Ledger.
PartyBusinessStyle	String	The PartyBusinessStyle value of the Ledger.
IsBillWiseOn	String	The IsBillWiseOn value of the Ledger.
IsCostCentresOn	String	The IsCostCentresOn value of the Ledger.
IsInterestOn	String	The IsInterestOn value of the Ledger.
AllowinMobile	String	The AllowinMobile value of the Ledger.
IsCostTrackingOn	String	The IsCostTrackingOn value of the Ledger.
IsBeneficiaryCodeOn	String	The IsBeneficiaryCodeOn value of the Ledger.
IsMstFromSync	String	The IsMstFromSync value of the Ledger.
IsUpdatingTargetId	String	The IsUpdatingTargetId value of the Ledger.
AsOriginal	String	The AsOriginal value of the Ledger.
IsCondensed	String	The IsCondensed value of the Ledger.
AffectsStock	String	The AffectsStock value of the Ledger.
IsRateInclusiveVAT	String	The IsRateInclusiveVAT value of the Ledger.
ForPayroll	String	The ForPayroll value of the Ledger.
IsABCEnabled	String	The IsABCEnabled value of the Ledger.
IsCreditDaysChkOn	String	The IsCreditDaysChkOn value of the Ledger.
InterestonBillwise	String	The InterestonBillwise value of the Ledger.
OverrideInterest	String	The OverrideInterest value of the Ledger.
OverrideAdvInterest	String	The OverrideAdvInterest value of the Ledger.
UseForVAT	String	The UseForVAT value of the Ledger.
IgnoreTDSExempt	String	The IgnoreTDSExempt value of the Ledger.
IsTCSApplicable	String	The IsTCSApplicable value of the Ledger.
IsTDSApplicable	String	The IsTDSApplicable value of the Ledger.
IsFBTApplicable	String	The IsFBTApplicable value of the Ledger.
IsGSTApplicable	String	The IsGSTApplicable value of the Ledger.
IsExciseApplicable	String	The IsExciseApplicable value of the Ledger.
IsTDSExpense	String	The IsTDSExpense value of the Ledger.
IsEDLIApplicable	String	The IsEDLIApplicable value of the Ledger.
IsRelatedParty	String	The IsRelatedParty value of the Ledger.
UseForESIEligibility	String	The UseForESIEligibility value of the Ledger.
IsInterestInclLastDay	String	The IsInterestInclLastDay value of the Ledger.
AppropriateTaxValue	String	The AppropriateTaxValue value of the Ledger.
IsBehaveAsDuty	String	The IsBehaveAsDuty value of the Ledger.
InterestInclDayOfAddition	String	The InterestInclDayOfAddition value of the Ledger.
InterestInclDayOfDeduction	String	The InterestInclDayOfDeduction value of the Ledger.
IsOthTerritoryAssessee	String	The IsOthTerritoryAssessee value of the Ledger.
OverRideCreditLimit	String	The OverRideCreditLimit value of the Ledger.
IsAgainstFormC	String	The IsAgainstFormC value of the Ledger.
IsChequePrintingEnabled	String	The IsChequePrintingEnabled value of the Ledger.
IsPayUpLoad	String	The IsPayUpLoad value of the Ledger.
IsPayBatchOnlySAL	String	The IsPayBatchOnlySAL value of the Ledger.
IsBNFCodeSupported	String	The IsBNFCodeSupported value of the Ledger.
AllowExportWithErrors	String	The AllowExportWithErrors value of the Ledger.
ConsiderPurchaseforExport	String	The ConsiderPurchaseforExport value of the Ledger.
IsTransporter	String	The IsTransporter value of the Ledger.
UseForNotionalITC	String	The UseForNotionalITC value of the Ledger.
IseCommOperator	String	The IseCommOperator value of the Ledger.
ShowinPayslip	String	The ShowinPayslip value of the Ledger.
UseForGratuity	String	The UseForGratuity value of the Ledger.
IsTDSProjected	String	The IsTDSProjected value of the Ledger.
ForServiceTax	String	The ForServiceTax value of the Ledger.
IsInputCredit	String	The IsInputCredit value of the Ledger.
IsExempted	String	The IsExempted value of the Ledger.
IsAbatementApplicable	String	The IsAbatementApplicable value of the Ledger.
IsSTXParty	String	The IsSTXParty value of the Ledger.
IsSTXNonRealizedType	String	The IsSTXNonRealizedType value of the Ledger.
IsUsedForCVD	String	The IsUsedForCVD value of the Ledger.
LedBelongsToNonTaxable	String	The LedBelongsToNonTaxable value of the Ledger.
IsExciseMerchantExporter	String	The IsExciseMerchantExporter value of the Ledger.
IsPartyExempted	String	The IsPartyExempted value of the Ledger.
IsSEZParty	String	The IsSEZParty value of the Ledger.
TDSDeducteeIsSpecialRate	String	The TDSDeducteeIsSpecialRate value of the Ledger.
IseChequeSupported	String	The IseChequeSupported value of the Ledger.
IseDDSupported	String	The IseDDSupported value of the Ledger.
HaseChequeDeliveryMode	String	The HaseChequeDeliveryMode value of the Ledger.
HaseChequeDeliveryTo	String	The HaseChequeDeliveryTo value of the Ledger.
HaseChequePrintLocation	String	The HaseChequePrintLocation value of the Ledger.
HaseChequePayableLocation	String	The HaseChequePayableLocation value of the Ledger.
HaseChequeBankLocation	String	The HaseChequeBankLocation value of the Ledger.
HaseDDDeliveryMode	String	The HaseDDDeliveryMode value of the Ledger.
HaseDDDeliveryTo	String	The HaseDDDeliveryTo value of the Ledger.
HaseDDPrintLocation	String	The HaseDDPrintLocation value of the Ledger.
HaseDDPayableLocation	String	The HaseDDPayableLocation value of the Ledger.
HaseDDBankLocation	String	The HaseDDBankLocation value of the Ledger.
IseBankingEnabled	String	The IseBankingEnabled value of the Ledger.
IsExportFileEncrypted	String	The IsExportFileEncrypted value of the Ledger.
IsBatchEnabled	String	The IsBatchEnabled value of the Ledger.
IsProductCodeBased	String	The IsProductCodeBased value of the Ledger.
HaseDDCity	String	The HaseDDCity value of the Ledger.
HaseChequeCity	String	The HaseChequeCity value of the Ledger.
IsFileNameFormatSupported	String	The IsFileNameFormatSupported value of the Ledger.
HasClientCode	String	The HasClientCode value of the Ledger.
PayInsIsBatchApplicable	String	The PayInsIsBatchApplicable value of the Ledger.
PayInsIsFileNumApp	String	The PayInsIsFileNumApp value of the Ledger.
IsSalaryTransGroupedForBRS	String	The IsSalaryTransGroupedForBRS value of the Ledger.
IseBankingSupported	String	The IseBankingSupported value of the Ledger.
IsSCBUAE	String	The IsSCBUAE value of the Ledger.
IsBankStatusApp	String	The IsBankStatusApp value of the Ledger.
IsSalaryGrouped	String	The IsSalaryGrouped value of the Ledger.
UseForPurchaseTax	String	The UseForPurchaseTax value of the Ledger.
Audited	String	The Audited value of the Ledger.
SamplingNumOneFactor	Decimal	The SamplingNumOneFactor value of the Ledger.
SamplingNumTwoFactor	Decimal	The SamplingNumTwoFactor value of the Ledger.
SortPosition	Decimal	The SortPosition value of the Ledger.
Alterid	Decimal	The Alterid value of the Ledger.
RemoteAlterID	Decimal	The RemoteAlterID value of the Ledger.
DefaultLanguage	Decimal	The DefaultLanguage value of the Ledger.
RateofTaxCalculation	Decimal	The RateofTaxCalculation value of the Ledger.
GratuityMonthDays	Decimal	The GratuityMonthDays value of the Ledger.
GratuityLimitMonths	Decimal	The GratuityLimitMonths value of the Ledger.
CalculationBasis	Decimal	The CalculationBasis value of the Ledger.
RoundingLimit	Decimal	The RoundingLimit value of the Ledger.
AbatementPercentage	Decimal	The AbatementPercentage value of the Ledger.
TDSDeducteeSpecialRate	Decimal	The TDSDeducteeSpecialRate value of the Ledger.
BeneficiaryCodeMaxLength	Decimal	The BeneficiaryCodeMaxLength value of the Ledger.
eChequePrintLocationVersion	Decimal	The eChequePrintLocationVersion value of the Ledger.
eChequePayableLocationVersion	Decimal	The eChequePayableLocationVersion value of the Ledger.
eDDPrintLocationVersion	Decimal	The eDDPrintLocationVersion value of the Ledger.
eDDPayableLocationVersion	Decimal	The eDDPayableLocationVersion value of the Ledger.
PayInsRunningFileNum	Decimal	The PayInsRunningFileNum value of the Ledger.
TransactionTypeVersion	Decimal	The TransactionTypeVersion value of the Ledger.
PayInsFileNumLength	Decimal	The PayInsFileNumLength value of the Ledger.
SamplingAmtOneFactor	String	The SamplingAmtOneFactor value of the Ledger.
SamplingAmtTwoFactor	String	The SamplingAmtTwoFactor value of the Ledger.
OpeningBalance	Decimal	The OpeningBalance value of the Ledger.
CreditLimit	String	The CreditLimit value of the Ledger.
GratuityLimitAmount	String	The GratuityLimitAmount value of the Ledger.
ODLimit	String	The ODLimit value of the Ledger.
tempGSTCGSTRate	Decimal	The tempGSTCGSTRate value of the Ledger.
tempGSTSGSTRate	Decimal	The tempGSTSGSTRate value of the Ledger.
tempGSTIGSTRate	Decimal	The tempGSTIGSTRate value of the Ledger.
tempGSTStateCessRate	Decimal	The tempGSTStateCessRate value of the Ledger.
tempIsVATfieldsEdited	String	The tempIsVATfieldsEdited value of the Ledger.
tempApplDate	Date	The tempApplDate value of the Ledger.
tempClassification	String	The tempClassification value of the Ledger.
tempNature	String	The tempNature value of the Ledger.
tempPartyEntity	String	The tempPartyEntity value of the Ledger.
tempBusinessNature	String	The tempBusinessNature value of the Ledger.
tempVATRate	Decimal	The tempVATRate value of the Ledger.
tempAddlTax	Decimal	The tempAddlTax value of the Ledger.
tempCessOnVat	Decimal	The tempCessOnVat value of the Ledger.
tempTaxType	String	The tempTaxType value of the Ledger.
tempMajorCommodityName	String	The tempMajorCommodityName value of the Ledger.
tempCommodityName	String	The tempCommodityName value of the Ledger.
tempCommodityCode	String	The tempCommodityCode value of the Ledger.
tempSubCommodityCode	String	The tempSubCommodityCode value of the Ledger.
tempUOM	String	The tempUOM value of the Ledger.
tempTypeofGoods	String	The tempTypeofGoods value of the Ledger.
tempTradeName	String	The tempTradeName value of the Ledger.
tempGoodsNature	String	The tempGoodsNature value of the Ledger.
tempSchedule	String	The tempSchedule value of the Ledger.
tempScheduleslNo	String	The tempScheduleslNo value of the Ledger.
tempIsInvDetailsEnable	String	The tempIsInvDetailsEnable value of the Ledger.
tempLocalVATRate	Decimal	The tempLocalVATRate value of the Ledger.
tempValuationType	String	The tempValuationType value of the Ledger.
tempIsCalcOnQty	String	The tempIsCalcOnQty value of the Ledger.
tempIsSaletoLocalCitizen	String	The tempIsSaletoLocalCitizen value of the Ledger.
LEDIsTDSApplicableCurrLiab	String	The LEDIsTDSApplicableCurrLiab value of the Ledger.
IsProductCodeEdited	String	The IsProductCodeEdited value of the Ledger.
Address	String	The Address value of the Ledger.
MailingName	String	The MailingName value of the Ledger.
TargetRemoteId	String	The TargetRemoteId value of the Ledger.
AddressNative	String	The AddressNative value of the Ledger.
BankUserLoginID	String	The BankUserLoginID value of the Ledger.
OldAuditEntryIds	Decimal	The OldAuditEntryIds value of the Ledger.
Closingbalance	Decimal	The Closingbalance value of the Ledger.
Address1	String	The Address1 value of the Ledger.
Address2	String	The Address2 value of the Ledger.
Address3	String	The Address3 value of the Ledger.
Address4	String	The Address4 value of the Ledger.
Address5	String	The Address5 value of the Ledger.
Primarygroup	String	The Primarygroup value of the Ledger.
Overduebills	Decimal	The Overduebills value of the Ledger.
Onaccountvalue	String	The Onaccountvalue value of the Ledger.
Cashinflow	Decimal	The Cashinflow value of the Ledger.
Cashoutflow	Decimal	The Cashoutflow value of the Ledger.
Performance	Decimal	The Performance value of the Ledger.
Drinterest	Decimal	The Drinterest value of the Ledger.
Crinterest	String	The Crinterest value of the Ledger.
Lastinterestdate	Date	The Lastinterestdate value of the Ledger.
Thisyearbalance	Decimal	The Thisyearbalance value of the Ledger.
Prevyearbalance	String	The Prevyearbalance value of the Ledger.
Thisquarterbalance	Decimal	The Thisquarterbalance value of the Ledger.
Prevquarterbalance	String	The Prevquarterbalance value of the Ledger.

Pseudo-Columns

Pseudo column fields are used in the WHERE clause of SELECT statements and offer more granular control over the data returned from the data source.


Name	Type	Description
Company	String	Name of the Company whose data need to be fetched. Please make sure it is selected and unlocked atleast once in the Tally tool after the tool is launched. It need not be in the selected state at the moment.

Payhead

Retrieve Payhead Details.

Table Specific Information

Select

The connector will use the Tally API to process WHERE clause conditions built with the following column and operator. The rest of the filter is executed client side within the connector.

String supports the '=, !=,<, <=, >, >=, LIKE, ORDER BY' comparisons.

For example these queries are processed server side:

SELECT * FROM PayHead WHERE Parent LIKE '%Maruti%'

SELECT * FROM PayHead WHERE RemoteAltGUID != NULL

SELECT * FROM PayHead WHERE TCSApplicable = 'True' AND OpeningValue > '0.00'

SELECT * FROM PayHead WHERE BaseUnits = 'Nos' OR BaseUnits = 'POS'

SELECT * FROM PayHead ORDER BY BaseUnits Desc

Columns


Name	Type	Description
StartingFrom	String	The StartingFrom value of the Payhead.
STRegDate	String	The STRegDate value of the Payhead.
LBTRegnDate	String	The LBTRegnDate value of the Payhead.
SamplingDateOneFactor	String	The SamplingDateOneFactor value of the Payhead.
SamplingDateTwoFactor	String	The SamplingDateTwoFactor value of the Payhead.
ActiveFrom	String	The ActiveFrom value of the Payhead.
ActiveTo	String	The ActiveTo value of the Payhead.
CreatedDate	String	The CreatedDate value of the Payhead.
AlteredOn	String	The AlteredOn value of the Payhead.
VATApplicableDate	String	The VATApplicableDate value of the Payhead.
ExciseRegistrationDate	String	The ExciseRegistrationDate value of the Payhead.
PANApplicableFrom	String	The PANApplicableFrom value of the Payhead.
PayInsRunningFileDate	String	The PayInsRunningFileDate value of the Payhead.
VATTaxExemptionDate	String	The VATTaxExemptionDate value of the Payhead.
Name	String	The Name value of the Payhead.
Address	String	The Address value of the Payhead.
GUID	String	The GUID value of the Payhead.
CurrencyName	String	The CurrencyName value of the Payhead.
EMail	String	The EMail value of the Payhead.
StateName	String	The StateName value of the Payhead.
PINCode	String	The PINCode value of the Payhead.
Website	String	The Website value of the Payhead.
IncomeTaxNumber	String	The IncomeTaxNumber value of the Payhead.
SalesTaxNumber	String	The SalesTaxNumber value of the Payhead.
InterStateSTNumber	String	The InterStateSTNumber value of the Payhead.
VATTINNumber	String	The VATTINNumber value of the Payhead.
CountryName	String	The CountryName value of the Payhead.
ExciseRange	String	The ExciseRange value of the Payhead.
ExciseDivision	String	The ExciseDivision value of the Payhead.
ExciseCommissionerate	String	The ExciseCommissionerate value of the Payhead.
LBTRegnNo	String	The LBTRegnNo value of the Payhead.
LBTZone	String	The LBTZone value of the Payhead.
ExportImportCode	String	The ExportImportCode value of the Payhead.
GSTRegistrationType	String	The GSTRegistrationType value of the Payhead.
VATDealerType	String	The VATDealerType value of the Payhead.
PriceLevel	String	The PriceLevel value of the Payhead.
UploadLastRefresh	String	The UploadLastRefresh value of the Payhead.
Parent	String	The Parent value of the Payhead.
MailingName	String	The MailingName value of the Payhead.
SamplingMethod	String	The SamplingMethod value of the Payhead.
SamplingStrOneFactor	String	The SamplingStrOneFactor value of the Payhead.
IFSCode	String	The IFSCode value of the Payhead.
Narration	String	The Narration value of the Payhead.
RemoteGUID	String	The RemoteGUID value of the Payhead.
RemoteAltGUID	String	The RemoteAltGUID value of the Payhead.
TargetRemoteId	String	The TargetRemoteId value of the Payhead.
RequestorRule	String	The RequestorRule value of the Payhead.
GrpDebitParent	String	The GrpDebitParent value of the Payhead.
GrpCreditParent	String	The GrpCreditParent value of the Payhead.
SysDebitParent	String	The SysDebitParent value of the Payhead.
SysCreditParent	String	The SysCreditParent value of the Payhead.
TDSApplicable	String	The TDSApplicable value of the Payhead.
TCSApplicable	String	The TCSApplicable value of the Payhead.
GSTApplicable	String	The GSTApplicable value of the Payhead.
CreatedBy	String	The CreatedBy value of the Payhead.
AlteredBy	String	The AlteredBy value of the Payhead.
TaxClassificationName	String	The TaxClassificationName value of the Payhead.
TaxType	String	The TaxType value of the Payhead.
BillCreditPeriod	String	The BillCreditPeriod value of the Payhead.
BankDetails	String	The BankDetails value of the Payhead.
BankBranchName	String	The BankBranchName value of the Payhead.
BankBSRCode	String	The BankBSRCode value of the Payhead.
DeducteeType	String	The DeducteeType value of the Payhead.
BusinessType	String	The BusinessType value of the Payhead.
TypeOfNotification	String	The TypeOfNotification value of the Payhead.
MSMERegNumber	String	The MSMERegNumber value of the Payhead.
CountryofResidence	String	The CountryofResidence value of the Payhead.
RelatedPartyId	String	The RelatedPartyId value of the Payhead.
RelPartyIssuingAuthority	String	The RelPartyIssuingAuthority value of the Payhead.
ImporterExporterCode	String	The ImporterExporterCode value of the Payhead.
EmailCC	String	The EmailCC value of the Payhead.
Description	String	The Description value of the Payhead.
LedAddlAllocType	String	The LedAddlAllocType value of the Payhead.
TransporterId	String	The TransporterId value of the Payhead.
LedgerPhone	String	The LedgerPhone value of the Payhead.
LedgerFax	String	The LedgerFax value of the Payhead.
LedgerContact	String	The LedgerContact value of the Payhead.
LedgerMobile	String	The LedgerMobile value of the Payhead.
RelationType	String	The RelationType value of the Payhead.
MailingNameNative	String	The MailingNameNative value of the Payhead.
AddressNative	String	The AddressNative value of the Payhead.
StateNameNative	String	The StateNameNative value of the Payhead.
CountryNameNative	String	The CountryNameNative value of the Payhead.
BasicTypeOfDuty	String	The BasicTypeOfDuty value of the Payhead.
GSTType	String	The GSTType value of the Payhead.
ExemptionType	String	The ExemptionType value of the Payhead.
AppropriateFor	String	The AppropriateFor value of the Payhead.
SubTaxType	String	The SubTaxType value of the Payhead.
STXNatureOfParty	String	The STXNatureOfParty value of the Payhead.
NameOnPAN	String	The NameOnPAN value of the Payhead.
UsedForTaxType	String	The UsedForTaxType value of the Payhead.
eCommMerchantID	String	The eCommMerchantID value of the Payhead.
PartyGSTIN	String	The PartyGSTIN value of the Payhead.
GSTDutyHead	String	The GSTDutyHead value of the Payhead.
GSTAppropriateTo	String	The GSTAppropriateTo value of the Payhead.
GSTTypeofSupply	String	The GSTTypeofSupply value of the Payhead.
GSTNatureofSupply	String	The GSTNatureofSupply value of the Payhead.
CessValuationMethod	String	The CessValuationMethod value of the Payhead.
PayType	String	The PayType value of the Payhead.
PayslipName	String	The PayslipName value of the Payhead.
AttendanceType	String	The AttendanceType value of the Payhead.
LeaveType	String	The LeaveType value of the Payhead.
CalculationPeriod	String	The CalculationPeriod value of the Payhead.
RoundingMethod	String	The RoundingMethod value of the Payhead.
ComputationType	String	The ComputationType value of the Payhead.
CalculationType	String	The CalculationType value of the Payhead.
PayStatType	String	The PayStatType value of the Payhead.
ProfessionalTaxNumber	String	The ProfessionalTaxNumber value of the Payhead.
UserDefinedCalenderType	String	The UserDefinedCalenderType value of the Payhead.
ITNature	String	The ITNature value of the Payhead.
ITComponent	String	The ITComponent value of the Payhead.
NotificationNumber	String	The NotificationNumber value of the Payhead.
RegistrationNumber	String	The RegistrationNumber value of the Payhead.
ServiceCategory	String	The ServiceCategory value of the Payhead.
AbatementNotificationNo	String	The AbatementNotificationNo value of the Payhead.
STXDutyHead	String	The STXDutyHead value of the Payhead.
STXClassification	String	The STXClassification value of the Payhead.
NotificationSlNo	String	The NotificationSlNo value of the Payhead.
ServiceTaxApplicable	String	The ServiceTaxApplicable value of the Payhead.
ExciseLedgerClassification	String	The ExciseLedgerClassification value of the Payhead.
ExciseRegistrationNumber	String	The ExciseRegistrationNumber value of the Payhead.
ExciseAccountHead	String	The ExciseAccountHead value of the Payhead.
ExciseDutyType	String	The ExciseDutyType value of the Payhead.
ExciseDutyHeadCode	String	The ExciseDutyHeadCode value of the Payhead.
ExciseAllocType	String	The ExciseAllocType value of the Payhead.
ExciseDutyHead	String	The ExciseDutyHead value of the Payhead.
NatureOfSales	String	The NatureOfSales value of the Payhead.
ExciseNotificationNo	String	The ExciseNotificationNo value of the Payhead.
ExciseImportsRegistartionNo	String	The ExciseImportsRegistartionNo value of the Payhead.
ExciseApplicability	String	The ExciseApplicability value of the Payhead.
ExciseTypeofBranch	String	The ExciseTypeofBranch value of the Payhead.
ExciseDefaultRemoval	String	The ExciseDefaultRemoval value of the Payhead.
ExciseNotificationSlNo	String	The ExciseNotificationSlNo value of the Payhead.
TypeOfTariff	String	The TypeOfTariff value of the Payhead.
ExciseRegNo	String	The ExciseRegNo value of the Payhead.
ExciseNatureofPurchase	String	The ExciseNatureofPurchase value of the Payhead.
TDSDeducteeTypeMst	String	The TDSDeducteeTypeMst value of the Payhead.
TDSRateName	String	The TDSRateName value of the Payhead.
TDSDeducteeSectionNumber	String	The TDSDeducteeSectionNumber value of the Payhead.
PANStatus	String	The PANStatus value of the Payhead.
DeducteeReference	String	The DeducteeReference value of the Payhead.
TDSDeducteeType	String	The TDSDeducteeType value of the Payhead.
ITExemptApplicable	String	The ITExemptApplicable value of the Payhead.
TaxIdentificationNo	String	The TaxIdentificationNo value of the Payhead.
LedgerFBTCategory	String	The LedgerFBTCategory value of the Payhead.
BranchCode	String	The BranchCode value of the Payhead.
ClientCode	String	The ClientCode value of the Payhead.
BankingConfigBank	String	The BankingConfigBank value of the Payhead.
BankingConfigBankID	String	The BankingConfigBankID value of the Payhead.
BankAccHolderName	String	The BankAccHolderName value of the Payhead.
UseForPOSType	String	The UseForPOSType value of the Payhead.
PaymentGateway	String	The PaymentGateway value of the Payhead.
TypeOfInterestOn	String	The TypeOfInterestOn value of the Payhead.
BankConfigIFSC	String	The BankConfigIFSC value of the Payhead.
BankConfigMICR	String	The BankConfigMICR value of the Payhead.
BankConfigShortCode	String	The BankConfigShortCode value of the Payhead.
PymtInstoutputName	String	The PymtInstoutputName value of the Payhead.
ProductCodeType	String	The ProductCodeType value of the Payhead.
SalaryPymtProductCode	String	The SalaryPymtProductCode value of the Payhead.
OtherPymtProductCode	String	The OtherPymtProductCode value of the Payhead.
PaymentInstLocation	String	The PaymentInstLocation value of the Payhead.
EncrptionLocation	String	The EncrptionLocation value of the Payhead.
NewIMFLocation	String	The NewIMFLocation value of the Payhead.
ImportedIMFLocation	String	The ImportedIMFLocation value of the Payhead.
BankNewStatements	String	The BankNewStatements value of the Payhead.
BankImportedStatements	String	The BankImportedStatements value of the Payhead.
BankMICR	String	The BankMICR value of the Payhead.
CorporateUserNoECS	String	The CorporateUserNoECS value of the Payhead.
CorporateUserNoACH	String	The CorporateUserNoACH value of the Payhead.
CorporateUserName	String	The CorporateUserName value of the Payhead.
BankUserLoginID	String	The BankUserLoginID value of the Payhead.
IMFName	String	The IMFName value of the Payhead.
PayInsBatchName	String	The PayInsBatchName value of the Payhead.
LastUsedBatchName	String	The LastUsedBatchName value of the Payhead.
PayInsFileNumPeriod	String	The PayInsFileNumPeriod value of the Payhead.
EncryptedBy	String	The EncryptedBy value of the Payhead.
EncryptedId	String	The EncryptedId value of the Payhead.
ISOCurrencyCode	String	The ISOCurrencyCode value of the Payhead.
BankCapsuleID	String	The BankCapsuleID value of the Payhead.
SalesTaxCessApplicable	String	The SalesTaxCessApplicable value of the Payhead.
BankIBAN	String	The BankIBAN value of the Payhead.
VATTaxExemptionNature	String	The VATTaxExemptionNature value of the Payhead.
VATTaxExemptionNumber	String	The VATTaxExemptionNumber value of the Payhead.
LedStateName	String	The LedStateName value of the Payhead.
VATApplicable	String	The VATApplicable value of the Payhead.
PartyBusinessType	String	The PartyBusinessType value of the Payhead.
PartyBusinessStyle	String	The PartyBusinessStyle value of the Payhead.
IsBillWiseOn	String	The IsBillWiseOn value of the Payhead.
IsCostCentresOn	String	The IsCostCentresOn value of the Payhead.
IsInterestOn	String	The IsInterestOn value of the Payhead.
AllowinMobile	String	The AllowinMobile value of the Payhead.
IsCostTrackingOn	String	The IsCostTrackingOn value of the Payhead.
IsBeneficiaryCodeOn	String	The IsBeneficiaryCodeOn value of the Payhead.
IsMstFromSync	String	The IsMstFromSync value of the Payhead.
IsUpdatingTargetId	String	The IsUpdatingTargetId value of the Payhead.
AsOriginal	String	The AsOriginal value of the Payhead.
IsCondensed	String	The IsCondensed value of the Payhead.
AffectsStock	String	The AffectsStock value of the Payhead.
IsRateInclusiveVAT	String	The IsRateInclusiveVAT value of the Payhead.
ForPayroll	String	The ForPayroll value of the Payhead.
IsABCEnabled	String	The IsABCEnabled value of the Payhead.
IsCreditDaysChkOn	String	The IsCreditDaysChkOn value of the Payhead.
InterestonBillwise	String	The InterestonBillwise value of the Payhead.
OverrideInterest	String	The OverrideInterest value of the Payhead.
OverrideAdvInterest	String	The OverrideAdvInterest value of the Payhead.
UseForVAT	String	The UseForVAT value of the Payhead.
IgnoreTDSExempt	String	The IgnoreTDSExempt value of the Payhead.
IsTCSApplicable	String	The IsTCSApplicable value of the Payhead.
IsTDSApplicable	String	The IsTDSApplicable value of the Payhead.
IsFBTApplicable	String	The IsFBTApplicable value of the Payhead.
IsGSTApplicable	String	The IsGSTApplicable value of the Payhead.
IsExciseApplicable	String	The IsExciseApplicable value of the Payhead.
IsTDSExpense	String	The IsTDSExpense value of the Payhead.
IsEDLIApplicable	String	The IsEDLIApplicable value of the Payhead.
IsRelatedParty	String	The IsRelatedParty value of the Payhead.
UseForESIEligibility	String	The UseForESIEligibility value of the Payhead.
IsInterestInclLastDay	String	The IsInterestInclLastDay value of the Payhead.
AppropriateTaxValue	String	The AppropriateTaxValue value of the Payhead.
IsBehaveAsDuty	String	The IsBehaveAsDuty value of the Payhead.
InterestInclDayOfAddition	String	The InterestInclDayOfAddition value of the Payhead.
InterestInclDayOfDeduction	String	The InterestInclDayOfDeduction value of the Payhead.
IsOthTerritoryAssessee	String	The IsOthTerritoryAssessee value of the Payhead.
OverRideCreditLimit	String	The OverRideCreditLimit value of the Payhead.
IsAgainstFormC	String	The IsAgainstFormC value of the Payhead.
IsChequePrintingEnabled	String	The IsChequePrintingEnabled value of the Payhead.
IsPayUpLoad	String	The IsPayUpLoad value of the Payhead.
IsPayBatchOnlySAL	String	The IsPayBatchOnlySAL value of the Payhead.
IsBNFCodeSupported	String	The IsBNFCodeSupported value of the Payhead.
AllowExportWithErrors	String	The AllowExportWithErrors value of the Payhead.
ConsiderPurchaseforExport	String	The ConsiderPurchaseforExport value of the Payhead.
IsTransporter	String	The IsTransporter value of the Payhead.
UseForNotionalITC	String	The UseForNotionalITC value of the Payhead.
IseCommOperator	String	The IseCommOperator value of the Payhead.
ShowinPayslip	String	The ShowinPayslip value of the Payhead.
UseForGratuity	String	The UseForGratuity value of the Payhead.
IsTDSProjected	String	The IsTDSProjected value of the Payhead.
ForServiceTax	String	The ForServiceTax value of the Payhead.
IsInputCredit	String	The IsInputCredit value of the Payhead.
IsExempted	String	The IsExempted value of the Payhead.
IsAbatementApplicable	String	The IsAbatementApplicable value of the Payhead.
IsSTXParty	String	The IsSTXParty value of the Payhead.
IsSTXNonRealizedType	String	The IsSTXNonRealizedType value of the Payhead.
IsUsedForCVD	String	The IsUsedForCVD value of the Payhead.
LedBelongsToNonTaxable	String	The LedBelongsToNonTaxable value of the Payhead.
IsExciseMerchantExporter	String	The IsExciseMerchantExporter value of the Payhead.
IsPartyExempted	String	The IsPartyExempted value of the Payhead.
IsSEZParty	String	The IsSEZParty value of the Payhead.
TDSDeducteeIsSpecialRate	String	The TDSDeducteeIsSpecialRate value of the Payhead.
IseChequeSupported	String	The IseChequeSupported value of the Payhead.
IseDDSupported	String	The IseDDSupported value of the Payhead.
HaseChequeDeliveryMode	String	The HaseChequeDeliveryMode value of the Payhead.
HaseChequeDeliveryTo	String	The HaseChequeDeliveryTo value of the Payhead.
HaseChequePrintLocation	String	The HaseChequePrintLocation value of the Payhead.
HaseChequePayableLocation	String	The HaseChequePayableLocation value of the Payhead.
HaseChequeBankLocation	String	The HaseChequeBankLocation value of the Payhead.
HaseDDDeliveryMode	String	The HaseDDDeliveryMode value of the Payhead.
HaseDDDeliveryTo	String	The HaseDDDeliveryTo value of the Payhead.
HaseDDPrintLocation	String	The HaseDDPrintLocation value of the Payhead.
HaseDDPayableLocation	String	The HaseDDPayableLocation value of the Payhead.
HaseDDBankLocation	String	The HaseDDBankLocation value of the Payhead.
IsEBankingEnabled	String	The IsEBankingEnabled value of the Payhead.
IsExportFileEncrypted	String	The IsExportFileEncrypted value of the Payhead.
IsBatchEnabled	String	The IsBatchEnabled value of the Payhead.
IsProductCodeBased	String	The IsProductCodeBased value of the Payhead.
HaseDDCity	String	The HaseDDCity value of the Payhead.
HaseChequeCity	String	The HaseChequeCity value of the Payhead.
IsFileNameFormatSupported	String	The IsFileNameFormatSupported value of the Payhead.
HasClientCode	String	The HasClientCode value of the Payhead.
PayInsIsBatchApplicable	String	The PayInsIsBatchApplicable value of the Payhead.
PayInsIsFileNumApp	String	The PayInsIsFileNumApp value of the Payhead.
IsSalaryTransGroupedForBRS	String	The IsSalaryTransGroupedForBRS value of the Payhead.
IseBankingSupported	String	The IseBankingSupported value of the Payhead.
IsSCBUAE	String	The IsSCBUAE value of the Payhead.
IsBankStatusApp	String	The IsBankStatusApp value of the Payhead.
IsSalaryGrouped	String	The IsSalaryGrouped value of the Payhead.
UseForPurchaseTax	String	The UseForPurchaseTax value of the Payhead.
Audited	String	The Audited value of the Payhead.
SamplingNumOneFactor	String	The SamplingNumOneFactor value of the Payhead.
SamplingNumTwoFactor	String	The SamplingNumTwoFactor value of the Payhead.
SortPosition	String	The SortPosition value of the Payhead.
AlterID	String	The AlterID value of the Payhead.
RemoteAlterID	String	The RemoteAlterID value of the Payhead.
DefaultLanguage	String	The DefaultLanguage value of the Payhead.
OldAuditEntryIds	String	The OldAuditEntryIds value of the Payhead.
RateOfTaxCalculation	String	The RateOfTaxCalculation value of the Payhead.
GratuityMonthDays	String	The GratuityMonthDays value of the Payhead.
GratuityLimitMonths	String	The GratuityLimitMonths value of the Payhead.
CalculationBasis	String	The CalculationBasis value of the Payhead.
RoundingLimit	String	The RoundingLimit value of the Payhead.
AbatementPercentage	String	The AbatementPercentage value of the Payhead.
TDSDeducteeSpecialRate	String	The TDSDeducteeSpecialRate value of the Payhead.
BeneficiaryCodeMaxLength	String	The BeneficiaryCodeMaxLength value of the Payhead.
eChequePrintLocationVersion	String	The eChequePrintLocationVersion value of the Payhead.
eChequePayableLocationVersion	String	The eChequePayableLocationVersion value of the Payhead.
eDDPrintLocationVersion	String	The eDDPrintLocationVersion value of the Payhead.
eDDPayableLocationVersion	String	The eDDPayableLocationVersion value of the Payhead.
PayInsRunningFileNum	String	The PayInsRunningFileNum value of the Payhead.
TransactionTypeVersion	String	The TransactionTypeVersion value of the Payhead.
PayInsFileNumLength	String	The PayInsFileNumLength value of the Payhead.
SamplingAmtOneFactor	String	The SamplingAmtOneFactor value of the Payhead.
SamplingAmtTwoFactor	String	The SamplingAmtTwoFactor value of the Payhead.
OpeningBalance	String	The OpeningBalance value of the Payhead.
CreditLimit	String	The CreditLimit value of the Payhead.
GratuityLimitAmount	String	The GratuityLimitAmount value of the Payhead.
ODLimit	String	The ODLimit value of the Payhead.
Closingbalance	String	The Closingbalance value of the Payhead.
Address1	String	The Address1 value of the Payhead.
Address2	String	The Address2 value of the Payhead.
Address3	String	The Address3 value of the Payhead.
Address4	String	The Address4 value of the Payhead.
Address5	String	The Address5 value of the Payhead.
Primarygroup	String	The Primarygroup value of the Payhead.
Overduebills	String	The Overduebills value of the Payhead.
Onaccountvalue	String	The Onaccountvalue value of the Payhead.
Cashinflow	String	The Cashinflow value of the Payhead.
Cashoutflow	String	The Cashoutflow value of the Payhead.
Performance	String	The Performance value of the Payhead.
Drinterest	String	The Drinterest value of the Payhead.
Crinterest	String	The Crinterest value of the Payhead.
Lastinterestdate	String	The Lastinterestdate value of the Payhead.
Thisyearbalance	String	The Thisyearbalance value of the Payhead.
Prevyearbalance	String	The Prevyearbalance value of the Payhead.
Thisquarterbalance	String	The Thisquarterbalance value of the Payhead.
Prevquarterbalance	String	The Prevquarterbalance value of the Payhead.

Pseudo-Columns

Pseudo column fields are used in the WHERE clause of SELECT statements and offer more granular control over the data returned from the data source.


Name	Type	Description
Company	String	Name of the Company whose data need to be fetched. Please make sure it is selected and unlocked atleast once in the Tally tool after the tool is launched. It need not be in the selected state at the moment.

PriceList

Retrieve PriceList.

Table Specific Information

Select

The connector will use the Tally API to process WHERE clause conditions built with the following column and operator. The rest of the filter is executed client side within the connector.

String supports the '=, !=,<, <=, >, >=, LIKE, ORDER BY' comparisons.

For example these queries are processed server side:

SELECT * FROM PriceList WHERE Guid LIKE '%4da0-b84f5%'

SELECT * FROM PriceList WHERE RemoteGUID != NULL

SELECT * FROM PriceList WHERE GSTApplicable = 'Applicable' AND CostingMethod = 'Avg. Cost'

SELECT * FROM PriceList WHERE Parent = 'Ashok Leyland' OR Parent = 'Maruti Limited'

SELECT * FROM PriceList WHERE IsBatchWiseOn > 'No'

SELECT * FROM PriceList ORDER BY Guid Asc

Columns


Name	Type	Description
Name	String	The Name value of the PriceList.
ActiveFrom	Date	The ActiveFrom value of the PriceList.
ActiveTo	Date	The ActiveTo value of the PriceList.
Guid	String	The Guid value of the PriceList.
Parent	String	The Parent value of the PriceList.
Narration	String	The Narration value of the PriceList.
RemoteGUID	String	The RemoteGUID value of the PriceList.
RemoteAltGUID	String	The RemoteAltGUID value of the PriceList.
RequestorRule	String	The RequestorRule value of the PriceList.
TDSApplicable	String	The TDSApplicable value of the PriceList.
TCSApplicable	String	The TCSApplicable value of the PriceList.
GSTApplicable	String	The GSTApplicable value of the PriceList.
CostingMethod	String	The CostingMethod value of the PriceList.
ValuationMethod	String	The ValuationMethod value of the PriceList.
BaseUnits	String	The BaseUnits value of the PriceList.
AdditionalUnits	String	The AdditionalUnits value of the PriceList.
ExciseTaxType	String	The ExciseTaxType value of the PriceList.
IsBatchWiseOn	String	The IsBatchWiseOn value of the PriceList.
IsPerishableOn	String	The IsPerishableOn value of the PriceList.
IsAddable	String	The IsAddable value of the PriceList.
IsMstFromSync	String	The IsMstFromSync value of the PriceList.
IsUpdatingTargetId	String	The IsUpdatingTargetId value of the PriceList.
AsOriginal	String	The AsOriginal value of the PriceList.
IgnorePhysicalDifference	String	The IgnorePhysicalDifference value of the PriceList.
IgnoreNegativeStock	String	The IgnoreNegativeStock value of the PriceList.
TreatSalesasManufactured	String	The TreatSalesasManufactured value of the PriceList.
TreatPurchasesasConsumed	String	The TreatPurchasesasConsumed value of the PriceList.
TreatRejectsasScrap	String	The TreatRejectsasScrap value of the PriceList.
HasMfgDate	String	The HasMfgDate value of the PriceList.
AllowUseofExpiredItems	String	The AllowUseofExpiredItems value of the PriceList.
IgnoreBatches	String	The IgnoreBatches value of the PriceList.
IgnoreGodowns	String	The IgnoreGodowns value of the PriceList.
SortPosition	Decimal	The SortPosition value of the PriceList.
Alterid	Decimal	The Alterid value of the PriceList.
RemoteAlterID	Decimal	The RemoteAlterID value of the PriceList.
Denominator	Decimal	The Denominator value of the PriceList.
Conversion	Decimal	The Conversion value of the PriceList.
tempGSTCGSTRate	Decimal	The tempGSTCGSTRate value of the PriceList.
tempGSTSGSTRate	Decimal	The tempGSTSGSTRate value of the PriceList.
tempGSTIGSTRate	Decimal	The tempGSTIGSTRate value of the PriceList.
tempGSTStateCessRate	Decimal	The tempGSTStateCessRate value of the PriceList.
tempIsVATfieldsEdited	String	The tempIsVATfieldsEdited value of the PriceList.
tempApplDate	Date	The tempApplDate value of the PriceList.
tempClassification	String	The tempClassification value of the PriceList.
tempNature	String	The tempNature value of the PriceList.
tempPartyEntity	String	The tempPartyEntity value of the PriceList.
tempBusinessNature	String	The tempBusinessNature value of the PriceList.
tempVATRate	Decimal	The tempVATRate value of the PriceList.
tempAddlTax	Decimal	The tempAddlTax value of the PriceList.
tempCessOnVat	Decimal	The tempCessOnVat value of the PriceList.
tempTaxType	String	The tempTaxType value of the PriceList.
tempMajorCommodityName	String	The tempMajorCommodityName value of the PriceList.
tempCommodityName	String	The tempCommodityName value of the PriceList.
tempCommodityCode	String	The tempCommodityCode value of the PriceList.
tempSubCommodityCode	String	The tempSubCommodityCode value of the PriceList.
tempUOM	String	The tempUOM value of the PriceList.
tempTypeofGoods	String	The tempTypeofGoods value of the PriceList.
tempTradeName	String	The tempTradeName value of the PriceList.
tempGoodsNature	String	The tempGoodsNature value of the PriceList.
tempSchedule	String	The tempSchedule value of the PriceList.
tempScheduleslNo	String	The tempScheduleslNo value of the PriceList.
tempIsInvDetailsEnable	String	The tempIsInvDetailsEnable value of the PriceList.
tempValuationType	String	The tempValuationType value of the PriceList.
tempIsCalcOnQty	String	The tempIsCalcOnQty value of the PriceList.
tempMRPRate	String	The tempMRPRate value of the PriceList.
tempMRPApplDate	Date	The tempMRPApplDate value of the PriceList.
TargetRemoteId	String	The TargetRemoteId value of the PriceList.
Closingbalance	String	The Closingbalance value of the PriceList.
Inwardquantity	String	The Inwardquantity value of the PriceList.
Outwardquantity	String	The Outwardquantity value of the PriceList.
Closingvalue	String	The Closingvalue value of the PriceList.
Inwardvalue	String	The Inwardvalue value of the PriceList.
Outwardvalue	String	The Outwardvalue value of the PriceList.
Closingrate	String	The Closingrate value of the PriceList.
Lastsaledate	String	The Lastsaledate value of the PriceList.
Lastsaleparty	String	The Lastsaleparty value of the PriceList.
Lastsaleprice	String	The Lastsaleprice value of the PriceList.
Lastsaleqty	String	The Lastsaleqty value of the PriceList.
Lastpurcdate	String	The Lastpurcdate value of the PriceList.
Lastpurcparty	String	The Lastpurcparty value of the PriceList.
Lastpurcprice	String	The Lastpurcprice value of the PriceList.
Lastpurccost	String	The Lastpurccost value of the PriceList.
Lastpurcqty	String	The Lastpurcqty value of the PriceList.
Consumption	String	The Consumption value of the PriceList.
Thisyearbalance	String	The Thisyearbalance value of the PriceList.
Prevyearbalance	String	The Prevyearbalance value of the PriceList.
Thisquarterbalance	String	The Thisquarterbalance value of the PriceList.
Prevquarterbalance	String	The Prevquarterbalance value of the PriceList.
Baseunits	String	The Baseunits value of the PriceList.
Additionalunits	String	The Additionalunits value of the PriceList.
Conversion	Decimal	The Conversion value of the PriceList.
Openingbalance	String	The Openingbalance value of the PriceList.
Credittotals	String	The Credittotals value of the PriceList.
Debittotals	String	The Debittotals value of the PriceList.
Openingvalue	String	The Openingvalue value of the PriceList.
Denominator	Decimal	The Denominator value of the PriceList.

Pseudo-Columns

Pseudo column fields are used in the WHERE clause of SELECT statements and offer more granular control over the data returned from the data source.


Name	Type	Description
Company	String	Name of the Company whose data need to be fetched. Please make sure it is selected and unlocked atleast once in the Tally tool after the tool is launched. It need not be in the selected state at the moment.

Report_BalanceSheet

Balance Sheet Report of Tally

Columns


Name	Type	Description
Name	String	Name for Report BalanceSheet.
MainAmount	Decimal	Main amount for Report BalanceSheet.
SubAmount	Decimal	Sub amount for Report BalanceSheet.
FromDate	Date	This is a mirror column.
ToDate	Date	This is a mirror column.

Pseudo-Columns

Pseudo column fields are used in the WHERE clause of SELECT statements and offer more granular control over the data returned from the data source.


Name	Type	Description
Company	String	Name of the Company whose data need to be fetched. Please make sure it is selected and unlocked atleast once in the Tally tool after the tool is launched. It need not be in the selected state at the moment.

Report_BankGroupSummary

Bank Group Summary Report of Tally

Columns


Name	Type	Description
Name	String	Name for Report BankGroupSummary.
DebitAmount	Decimal	DebitAmount for Report BankGroupSummary.
CreditAmount	Decimal	CreditAmount for Report BankGroupSummary.
FromDate	Date	This is a mirror column.
ToDate	Date	This is a mirror column.

Pseudo-Columns

Pseudo column fields are used in the WHERE clause of SELECT statements and offer more granular control over the data returned from the data source.


Name	Type	Description
Company	String	Name of the Company whose data need to be fetched. Please make sure it is selected and unlocked atleast once in the Tally tool after the tool is launched. It need not be in the selected state at the moment.

Report_BillsPayable

Bills Payable Report of Tally

Columns


Name	Type	Description
BillParty	String	Bill party for Report BillsPayable.
BillRef	String	Bill reference for Report BillsPayable.
BillDate	Date	Bill date for Report BillsPayable.
BillAmount	Decimal	Bill amount for Report BillsPayable.
BillDueDate	Date	Bill due date for Report BillsPayable.
BillOverdue	Boolean	Bill overdue for Report BillsPayable.
FromDate	Date	This is a mirror column.
ToDate	Date	This is a mirror column.

Pseudo-Columns

Pseudo column fields are used in the WHERE clause of SELECT statements and offer more granular control over the data returned from the data source.


Name	Type	Description
Company	String	Name of the Company whose data need to be fetched. Please make sure it is selected and unlocked atleast once in the Tally tool after the tool is launched. It need not be in the selected state at the moment.

Report_BillsReceivable

Bills Receivable Report of Tally

Columns


Name	Type	Description
BillParty	String	Bill party for Report BillsReceivable.
BillRef	String	Bill reference for Report BillsReceivable.
BillDate	Date	Bill date for Report BillsReceivable.
BillAmount	Decimal	Bill Amount for Report BillsReceivable.
BillDueDate	Date	Bill due date for Report BillsReceivable.
BillOverdue	Boolean	Bill overdue for Report BillsReceivable.
FromDate	Date	This is a mirror column.
ToDate	Date	This is a mirror column.

Pseudo-Columns

Pseudo column fields are used in the WHERE clause of SELECT statements and offer more granular control over the data returned from the data source.


Name	Type	Description
Company	String	Name of the Company whose data need to be fetched. Please make sure it is selected and unlocked atleast once in the Tally tool after the tool is launched. It need not be in the selected state at the moment.

Report_GodownSummary

Godown Summary Report of Tally

Table Specific Information

Select

The connector will use the Tally API to process WHERE clause conditions built with the following column and operator. The DspGodownName is required to make a request and the rest of the filter is executed client side within the connector.

DspGodownName supports the '=' comparisons.
FromDate supports the '=' comparisons.
ToDate supports the '=' comparisons.

For example these queries are processed server side:

SELECT * FROM Report_GodownSummary WHERE DspGodownName = 'Karnataka'

SELECT * FROM Report_GodownSummary WHERE DspGodownName = 'Karnataka' AND FromDate = '01/01/2019' AND ToDate = '01/01/2020'

Columns


Name	Type	Description
Name	String	Name for Report GodownSummary.
Quantity	String	Quantity for Report GodownSummary.
Rate	String	Rate for Report GodownSummary.
Amount	Decimal	Amount for Report GodownSummary.
DspGodownName	String	This is a mirror column.
FromDate	Date	This is a mirror column.
ToDate	Date	This is a mirror column.

Pseudo-Columns

Pseudo column fields are used in the WHERE clause of SELECT statements and offer more granular control over the data returned from the data source.


Name	Type	Description
Company	String	Name of the Company whose data need to be fetched. Please make sure it is selected and unlocked atleast once in the Tally tool after the tool is launched. It need not be in the selected state at the moment.

Report_GroupOutstandings

Group Outstandings Report of Tally

Table Specific Information

Select

The connector will use the Tally API to process WHERE clause conditions built with the following column and operator. The GroupName is required to make a request and the rest of the filter is executed client side within the connector.

GroupName supports the '=' comparisons.
FromDate supports the '=' comparisons.
ToDate supports the '=' comparisons.

For example these queries are processed server side:

SELECT * FROM Report_GroupOutstandings WHERE GroupName = 'Group1'

SELECT * FROM Report_GroupOutstandings WHERE GroupName = 'Group1' AND FromDate = '01/01/2019' AND ToDate = '01/01/2020'

Columns


Name	Type	Description
Name	String	Name for Report GroupOutstandings.
DebitAmount	Decimal	Debit amount for Report GroupOutstandings.
CreditAmount	Decimal	Credit amount for Report GroupOutstandings.
GroupName	String	This is a mirror column.
FromDate	Date	This is a mirror column.
ToDate	Date	This is a mirror column.

Pseudo-Columns

Pseudo column fields are used in the WHERE clause of SELECT statements and offer more granular control over the data returned from the data source.


Name	Type	Description
Company	String	Name of the Company whose data need to be fetched. Please make sure it is selected and unlocked atleast once in the Tally tool after the tool is launched. It need not be in the selected state at the moment.

Report_GroupSummary

Group Summary Report of Tally

Columns


Name	Type	Description
Name	String	Name for Report GroupSummary.
DebitAmount	Decimal	Debit amount for Report GroupSummary.
CreditAmount	Decimal	Credit amount for Report GroupSummary.
FromDate	Date	This is a mirror column.
ToDate	Date	This is a mirror column.

Pseudo-Columns

Pseudo column fields are used in the WHERE clause of SELECT statements and offer more granular control over the data returned from the data source.


Name	Type	Description
Company	String	Name of the Company whose data need to be fetched. Please make sure it is selected and unlocked atleast once in the Tally tool after the tool is launched. It need not be in the selected state at the moment.

Report_GroupVouchers

Group Vouchers Report of Tally

Table Specific Information

Select

The connector will use the Tally API to process WHERE clause conditions built with the following column and operator. The GroupName is required to make a request and the rest of the filter is executed client side within the connector.

GroupName supports the '=' comparisons.
FromDate supports the '=' comparisons.
ToDate supports the '=' comparisons.

For example these queries are processed server side:

SELECT * FROM Report_GroupVouchers WHERE GroupName = 'Group1'

SELECT * FROM Report_GroupVouchers WHERE GroupName = 'Group1' AND FromDate = '01/01/2019' AND ToDate = '01/01/2020'

Columns


Name	Type	Description
Account	String	Account for Report GroupVouchers.
Date	Date	Date for Report GroupVouchers.
Type	String	Type for Report GroupVouchers.
DebitAmount	Decimal	Debit amount for Report GroupVouchers.
CreditAmount	Decimal	Credit amount for Report GroupVouchers.
GroupName	String	This is a mirror column.
FromDate	Date	This is a mirror column.
ToDate	Date	This is a mirror column.

Pseudo-Columns

Pseudo column fields are used in the WHERE clause of SELECT statements and offer more granular control over the data returned from the data source.


Name	Type	Description
Company	String	Name of the Company whose data need to be fetched. Please make sure it is selected and unlocked atleast once in the Tally tool after the tool is launched. It need not be in selected state at the moment.

Report_ItemMonthlySummary

ItemMonthlySummary Report of Tally

Columns


Name	Type	Description
Month	String	Month for Report ItemMonthlySummary.
Quantity	String	Quantity for Report ItemMonthlySummary.
Rate	String	Rate for Report ItemMonthlySummary.
Amount	Decimal	Amount for Report ItemMonthlySummary.
FromDate	Date	This is a mirror column.
ToDate	Date	This is a mirror column.

Pseudo-Columns

Pseudo column fields are used in the WHERE clause of SELECT statements and offer more granular control over the data returned from the data source.


Name	Type	Description
Company	String	Name of the Company whose data need to be fetched. Please make sure it is selected and unlocked atleast once in the Tally tool after the tool is launched. It need not be in the selected state at the moment.

Report_LedgerOutstandings

Ledger Outstandings Report of Tally

Table Specific Information

Select

The connector will use the Tally API to process WHERE clause conditions built with the following column and operator. The LedgerName is required to make a request and the rest of the filter is executed client side within the connector.

LedgerName supports the '=' comparisons.
FromDate supports the '=' comparisons.
ToDate supports the '=' comparisons.

For example these queries are processed server side:

SELECT * FROM Report_LedgerOutstandings WHERE LedgerName = 'Ledger1'

SELECT * FROM Report_LedgerOutstandings WHERE LedgerName = 'Ledger1' AND FromDate = '01/01/2019' AND ToDate = '01/01/2020'

Columns


Name	Type	Description
BillDate	Date	Bill date for Report LedgerOutstandings.
BillRef	String	Bill reference for Report LedgerOutstandings.
BillAmount	Decimal	Bill amount for Report LedgerOutstandings.
BillDueDate	Date	Bill due date for Report LedgerOutstandings.
BillOverdue	Boolean	Bill overdue for Report LedgerOutstandings.
LedgerName	String	This is a mirror column.
FromDate	Date	This is a mirror column.
ToDate	Date	This is a mirror column.

Pseudo-Columns

Pseudo column fields are used in the WHERE clause of SELECT statements and offer more granular control over the data returned from the data source.


Name	Type	Description
Company	String	Name of the Company whose data need to be fetched. Please make sure it is selected and unlocked atleast once in the Tally tool after the tool is launched. It need not be in the selected state at the moment.

Report_LedgerVouchers

Ledger Vouchers Report of Tally

Table Specific Information

Select

The connector will use the Tally API to process WHERE clause conditions built with the following column and operator. The LedgerName is required to make a request and the rest of the filter is executed client side within the connector.

LedgerName supports the '=' comparisons.
FromDate supports the '=' comparisons.
ToDate supports the '=' comparisons.

For example these queries are processed server side:

SELECT * FROM Report_LedgerVouchers WHERE LedgerName = 'Ledger1'

SELECT * FROM Report_LedgerVouchers WHERE LedgerName = 'Ledger1' AND FromDate = '01/01/2019' AND ToDate = '01/01/2020'

Columns


Name	Type	Description
Account	String	Acoount for Report LedgerVouchers.
Date	Date	Date for Report LedgerVouchers.
Type	String	Type for Report LedgerVouchers.
DebitAmount	Decimal	Debit amount for Report LedgerVouchers.
CreditAmount	Decimal	Credit amount for Report LedgerVouchers.
LedgerName	String	This is a mirror column.
FromDate	Date	This is a mirror column.
ToDate	Date	This is a mirror column.

Pseudo-Columns

Pseudo column fields are used in the WHERE clause of SELECT statements and offer more granular control over the data returned from the data source.


Name	Type	Description
Company	String	Name of the Company whose data need to be fetched. Please make sure it is selected and unlocked atleast once in the Tally tool after the tool is launched. It need not be in the selected state at the moment.

Report_NegativeLedger

Negative Ledger Report of Tally

Columns


Name	Type	Description
Name	String	Name for Report NegativeLedger.
DebitAmount	Decimal	Debit amount Report NegativeLedger.
CreditAmount	Decimal	Credit amount Report NegativeLedger.
FromDate	Date	This is a mirror column.
ToDate	Date	This is a mirror column.

Pseudo-Columns

Pseudo column fields are used in the WHERE clause of SELECT statements and offer more granular control over the data returned from the data source.


Name	Type	Description
Company	String	Name of the Company whose data need to be fetched. Please make sure it is selected and unlocked atleast once in the Tally tool after the tool is launched. It need not be in the selected state at the moment.

Report_NegativeStock

Negative Stock Report of Tally

Columns


Name	Type	Description
Name	String	Name for Report NegativeStock.
Quantity	String	Quantity for Report NegativeStock.
Rate	String	Rate for Report NegativeStock.
Amount	Decimal	Amount for Report NegativeStock.
FromDate	Date	This is a mirror column.
ToDate	Date	This is a mirror column.

Pseudo-Columns

Pseudo column fields are used in the WHERE clause of SELECT statements and offer more granular control over the data returned from the data source.


Name	Type	Description
Company	String	Name of the Company whose data need to be fetched. Please make sure it is selected and unlocked atleast once in the Tally tool after the tool is launched. It need not be in the selected state at the moment.

Report_ProfitAndLoss

Profit and Loss Report of Tally

Columns


Name	Type	Description
Name	String	Name for Report ProfitAndLoss
MainAmount	Decimal	Main amount for Report ProfitAndLoss
SubAmount	Decimal	Sub amount for Report ProfitAndLoss
FromDate	Date	This is a mirror column.
ToDate	Date	This is a mirror column.

Pseudo-Columns

Pseudo column fields are used in the WHERE clause of SELECT statements and offer more granular control over the data returned from the data source.


Name	Type	Description
Company	String	Name of the Company whose data need to be fetched. Please make sure it is selected and unlocked atleast once in the Tally tool after the tool is launched. It need not be in the selected state at the moment.

Report_RatioAnalysis

Ratio Analysis Report of Tally

Columns


Name	Type	Description
RatioName	String	Ratio name for Report RatioAnalysis.
RatioValue	String	Ratio value for Report RatioAnalysis.
FromDate	Date	This is a mirror column.
ToDate	Date	This is a mirror column.

Pseudo-Columns

Pseudo column fields are used in the WHERE clause of SELECT statements and offer more granular control over the data returned from the data source.


Name	Type	Description
Company	String	Name of the Company whose data need to be fetched. Please make sure it is selected and unlocked atleast once in the Tally tool after the tool is launched. It need not be in the selected state at the moment.

Report_Statistics

Statistics Report of Tally

Columns


Name	Type	Description
StatisticName	String	Statistic name for Report Statistics.
StatisticDirectValue	Integer	Statistic direct value for Report Statistics.
StatisticCancelled	String	Statistic cancelled value for Report Statistics.
FromDate	Date	This is a mirror column.
ToDate	Date	This is a mirror column.

Pseudo-Columns

Pseudo column fields are used in the WHERE clause of SELECT statements and offer more granular control over the data returned from the data source.


Name	Type	Description
Company	String	Name of the Company whose data need to be fetched. Please make sure it is selected and unlocked atleast once in the Tally tool after the tool is launched. It need not be in the selected state at the moment.

Report_StockGroupSummary

Stock Summary Report of Tally

Columns


Name	Type	Description
Name	String	Name for Report StockGroupSummary.
Quantity	String	Quantity for Report StockGroupSummary.
Rate	String	Rate for Report StockGroupSummary.
Amount	Decimal	Amount for Report StockGroupSummary.
FromDate	Date	This is a mirror column.
ToDate	Date	This is a mirror column.

Pseudo-Columns

Pseudo column fields are used in the WHERE clause of SELECT statements and offer more granular control over the data returned from the data source.


Name	Type	Description
Company	String	Name of the Company whose data need to be fetched. Please make sure it is selected and unlocked atleast once in the Tally tool after the tool is launched. It need not be in the selected state at the moment.

Report_StockItemSummary

Stock Summary Report of Tally

Table Specific Information

Select

The connector will use the Tally API to process WHERE clause conditions built with the following column and operator. The STOCKGROUPNAME is required to make a request and the rest of the filter is executed client side within the connector.

STOCKGROUPNAME supports the '=' comparisons.
FromDate supports the '=' comparisons.
ToDate supports the '=' comparisons.

For example these queries are processed server side:

SELECT * FROM Report_StockItemSummary WHERE STOCKGROUPNAME = 'StockItem1'

SELECT * FROM Report_StockItemSummary WHERE STOCKGROUPNAME = 'StockItem1' AND FromDate = '01/01/2019' AND ToDate = '01/01/2020'

Columns


Name	Type	Description
Name	String	Name for Report StockItemSummary.
Quantity	String	Quantity for StockItemSummary.
Rate	String	Rate for StockItemSummary.
Amount	Decimal	Amount for StockItemSummary.
STOCKGROUPNAME	String	This is a mirror column.
FromDate	Date	This is a mirror column.
ToDate	Date	This is a mirror column.

Pseudo-Columns

Pseudo column fields are used in the WHERE clause of SELECT statements and offer more granular control over the data returned from the data source.


Name	Type	Description
Company	String	Name of the Company whose data need to be fetched. Please make sure it is selected and unlocked atleast once in the Tally tool after the tool is launched. It need not be in the selected state at the moment.

Report_StockVouchers

StockVouchers Report of Tally

Table Specific Information

Select

The connector will use the Tally API to process WHERE clause conditions built with the following column and operator. The StockItemName is required to make a request and the rest of the filter is executed client side within the connector.

StockItemName supports the '=' comparisons.
FromDate supports the '=' comparisons.
ToDate supports the '=' comparisons.

For example these queries are processed server side:

SELECT * FROM Report_StockVouchers WHERE StockItemName = 'StockItem1'

SELECT * FROM Report_StockVouchers WHERE StockItemName = 'StockItem1' AND FromDate = '01/01/2019' AND ToDate = '01/01/2020'

Columns


Name	Type	Description
Account	String	Account for Report StockVouchers.
Date	Date	Date for Report StockVouchers.
Type	String	Type for Report StockVouchers.
InQuantity	String	Quantity for Report StockVouchers.
InAmount	Decimal	Amount for Report StockVouchers.
OutQuantity	String	OutQuantity for Report StockVouchers.
OutAmount	Decimal	OutAmount for Report StockVouchers.
StockItemName	String	This is a mirror column.
FromDate	Date	This is a mirror column.
ToDate	Date	This is a mirror column.

Pseudo-Columns

Pseudo column fields are used in the WHERE clause of SELECT statements and offer more granular control over the data returned from the data source.


Name	Type	Description
Company	String	Name of the Company whose data need to be fetched. Please make sure it is selected and unlocked atleast once in the Tally tool after the tool is launched. It need not be in the selected state at the moment.

Report_TrialBalance

Trial Balance Report of Tally

Columns


Name	Type	Description
Name	String	Name for Report TrialBalance.
DebitAmount	Decimal	DebitAmount for Report TrialBalance.
CreditAmount	Decimal	CreditAmount for Report TrialBalance.
FromDate	Date	This is a mirror column.
ToDate	Date	This is a mirror column.

Pseudo-Columns

Pseudo column fields are used in the WHERE clause of SELECT statements and offer more granular control over the data returned from the data source.


Name	Type	Description
Company	String	Name of the Company whose data need to be fetched. Please make sure it is selected and unlocked atleast once in the Tally tool after the tool is launched. It need not be in the selected state at the moment.

Report_VoucherRegister

Voucher Register Report of Tally

Table Specific Information

Select

The connector will use the Tally API to process WHERE clause conditions built with the following column and operator.

VOUCHERTYPENAME supports the '=' comparisons.
FromDate supports the '=' comparisons.
ToDate supports the '=' comparisons.

For example these queries are processed server side:

SELECT * FROM Report_VoucherRegister WHERE VOUCHERTYPENAME = 'Stock Journal'

SELECT * FROM Report_VoucherRegister WHERE VOUCHERTYPENAME = 'Stock Journal' AND FromDate = '01/01/2019' AND ToDate = '01/01/2020'

Columns


Name	Type	Description
OBJVIEW	String	OBJVIEW for Report VoucherRegister
REMOTEID	String	REMOTEID for Report VoucherRegister
SENDERID	String	SENDERID for Report VoucherRegister
VCHKEY	String	VCHKEY for Report VoucherRegister
VCHTYPE	String	VCHTYPE for Report VoucherRegister
OLDAUDITENTRYIDS_LIST	String	OLDAUDITENTRYIDS_LIST for Report VoucherRegister
ACCOUNTAUDITENTRIES_LIST	String	ACCOUNTAUDITENTRIES_LIST for Report VoucherRegister
ACTIVETO	String	ACTIVETO for Report VoucherRegister
ADDITIONALNARRATION	String	ADDITIONALNARRATION for Report VoucherRegister
ADDRESS_LIST	String	ADDRESS_LIST for Report VoucherRegister
ADJFROMDATE	Date	ADJFROMDATE for Report VoucherRegister
ADJPARTYGSTIN	String	ADJPARTYGSTIN for Report VoucherRegister
ADJPARTYINVOICEDATE	Date	ADJPARTYINVOICEDATE for Report VoucherRegister
ADJPARTYINVOICENO	String	ADJPARTYINVOICENO for Report VoucherRegister
ADJPARTYINVOICEVALUE	String	ADJPARTYINVOICEVALUE for Report VoucherRegister
ADJPARTYPAYMENTDATE	Date	ADJPARTYPAYMENTDATE for Report VoucherRegister
ADJTODATE	Date	ADJTODATE for Report VoucherRegister
ADVANCERECEIPTDATE	Date	ADVANCERECEIPTDATE for Report VoucherRegister
ADVANCERECEIPTNUMBER	String	ADVANCERECEIPTNUMBER for Report VoucherRegister
AGGREMENTORDERDATE	Date	AGGREMENTORDERDATE for Report VoucherRegister
AGGREMENTORDERNO	String	AGGREMENTORDERNO for Report VoucherRegister
AIRPORTNAME	String	AIRPORTNAME for Report VoucherRegister
AIRWAYBILLDATE	Date	AIRWAYBILLDATE for Report VoucherRegister
AIRWAYBILLNO	String	AIRWAYBILLNO for Report VoucherRegister
ALLINVENTORYENTRIES_LIST	String	ALLINVENTORYENTRIES_LIST for Report VoucherRegister
ALLLEDGERENTRIES_LIST	String	ALLLEDGERENTRIES_LIST for Report VoucherRegister
ALLOWCONSUMPTION	String	ALLOWCONSUMPTION for Report VoucherRegister
ALTEREDBY	String	ALTEREDBY for Report VoucherRegister
ALTEREDON	String	ALTEREDON for Report VoucherRegister
ALTERID	String	ALTERID for Report VoucherRegister
AREFORMTYPE	String	AREFORMTYPE for Report VoucherRegister
ARESERIALMASTER	String	ARESERIALMASTER for Report VoucherRegister
ARESERIALNUMBER	String	ARESERIALNUMBER for Report VoucherRegister
ASORIGINAL	String	ASORIGINAL for Report VoucherRegister
ASPAYSLIP	String	ASPAYSLIP for Report VoucherRegister
ATTDRECORDS_LIST	String	ATTDRECORDS_LIST for Report VoucherRegister
ATTENDANCEENTRIES_LIST	String	ATTENDANCEENTRIES_LIST for Report VoucherRegister
AUDITED	String	AUDITED for Report VoucherRegister
AUDITEDON	String	AUDITEDON for Report VoucherRegister
AUDITENTRIES_LIST	String	AUDITENTRIES_LIST for Report VoucherRegister
AUTHORITYADDRESS	String	AUTHORITYADDRESS for Report VoucherRegister
AUTHORITYNAME	String	AUTHORITYNAME for Report VoucherRegister
AUTOCOSTLEVEL	String	AUTOCOSTLEVEL for Report VoucherRegister
BASICBASEPARTYNAME	String	BASICBASEPARTYNAME for Report VoucherRegister
BASICBUYERADDRESS_LIST	String	BASICBUYERADDRESS_LIST for Report VoucherRegister
BASICBUYERNAME	String	BASICBUYERNAME for Report VoucherRegister
BASICBUYERSSALESTAXNO	String	BASICBUYERSSALESTAXNO for Report VoucherRegister
BASICDATETIMEOFINVOICE	String	BASICDATETIMEOFINVOICE for Report VoucherRegister
BASICDATETIMEOFREMOVAL	String	BASICDATETIMEOFREMOVAL for Report VoucherRegister
BASICDESTINATIONCOUNTRY	String	BASICDESTINATIONCOUNTRY for Report VoucherRegister
BASICDUEDATEOFPYMT	String	BASICDUEDATEOFPYMT for Report VoucherRegister
BASICDUEDATEOFPYMT	String	BASICDUEDATEOFPYMT for Report VoucherRegister
BASICFINALDESTINATION	String	BASICFINALDESTINATION for Report VoucherRegister
BASICORDERREF	String	BASICORDERREF for Report VoucherRegister
BASICPLACEOFRECEIPT	String	BASICPLACEOFRECEIPT for Report VoucherRegister
BASICPORTOFDISCHARGE	String	BASICPORTOFDISCHARGE for Report VoucherRegister
BASICPORTOFLOADING	String	BASICPORTOFLOADING for Report VoucherRegister
BASICSERIALNUMINPLA	String	BASICSERIALNUMINPLA for Report VoucherRegister
BASICSHIPDOCUMENTNO	String	BASICSHIPDOCUMENTNO for Report VoucherRegister
BASICSHIPPEDBY	String	BASICSHIPPEDBY for Report VoucherRegister
BASICSHIPVESSELNO	String	BASICSHIPVESSELNO for Report VoucherRegister
BASICVOUCHERCHEQUENAME	String	BASICVOUCHERCHEQUENAME for Report VoucherRegister
BASICVOUCHERCROSSCOMMENT	String	BASICVOUCHERCROSSCOMMENT for Report VoucherRegister
BILLOFENTRYDATE	Date	BILLOFENTRYDATE for Report VoucherRegister
BILLOFENTRYNO	String	BILLOFENTRYNO for Report VoucherRegister
BILLOFLADINGDATE	Date	BILLOFLADINGDATE for Report VoucherRegister
BILLOFLADINGNO	String	BILLOFLADINGNO for Report VoucherRegister
BONDAMOUNT	String	BONDAMOUNT for Report VoucherRegister
BONDDATEOFISSUE	Date	BONDDATEOFISSUE for Report VoucherRegister
BONDEXPIRYDATE	Date	BONDEXPIRYDATE for Report VoucherRegister
BONDNUMBER	String	BONDNUMBER for Report VoucherRegister
BUYERADDRESSTYPE	String	BUYERADDRESSTYPE for Report VoucherRegister
BUYERPINNUMBER	String	BUYERPINNUMBER for Report VoucherRegister
BUYERSCSTNUMBER	String	BUYERSCSTNUMBER for Report VoucherRegister
CARRIERNAME	String	CARRIERNAME for Report VoucherRegister
CASHPARTYDEDTYPE	String	CASHPARTYDEDTYPE for Report VoucherRegister
CASHPARTYPAN	String	CASHPARTYPAN for Report VoucherRegister
CERTIFICATEDATE	Date	CERTIFICATEDATE for Report VoucherRegister
CERTIFICATENUMBER	String	CERTIFICATENUMBER for Report VoucherRegister
CERTIFICATETYPE	String	CERTIFICATETYPE for Report VoucherRegister
CHALLANTYPE	String	CHALLANTYPE for Report VoucherRegister
CHANGEVCHMODE	String	CHANGEVCHMODE for Report VoucherRegister
CHEQUEDEPOSITORNAME	String	CHEQUEDEPOSITORNAME for Report VoucherRegister
CLASSNAME	String	CLASSNAME for Report VoucherRegister
CLEARINGAGENTNAME	String	CLEARINGAGENTNAME for Report VoucherRegister
COMMONNATUREOFPAYMENT	String	COMMONNATUREOFPAYMENT for Report VoucherRegister
CONSIGNEECIRCLE	String	CONSIGNEECIRCLE for Report VoucherRegister
CONSIGNEECITY	String	CONSIGNEECITY for Report VoucherRegister
CONSIGNEECSTNUMBER	String	CONSIGNEECSTNUMBER for Report VoucherRegister
CONSIGNEEGSTIN	String	CONSIGNEEGSTIN for Report VoucherRegister
CONSIGNEEIECODE	String	CONSIGNEEIECODE for Report VoucherRegister
CONSIGNEELBTREGNNO	String	CONSIGNEELBTREGNNO for Report VoucherRegister
CONSIGNEELBTZONE	String	CONSIGNEELBTZONE for Report VoucherRegister
CONSIGNEEMAIL	String	CONSIGNEEMAIL for Report VoucherRegister
CONSIGNEEMOBILENUMBER	String	CONSIGNEEMOBILENUMBER for Report VoucherRegister
CONSIGNEEOTHERS	String	CONSIGNEEOTHERS for Report VoucherRegister
CONSIGNEEPINCODE	String	CONSIGNEEPINCODE for Report VoucherRegister
CONSIGNEEPINNUMBER	String	CONSIGNEEPINNUMBER for Report VoucherRegister
CONSIGNEESTATENAME	String	CONSIGNEESTATENAME for Report VoucherRegister
CONSUMERIDENTIFICATIONNUMBER	String	CONSUMERIDENTIFICATIONNUMBER for Report VoucherRegister
CONTRACTORTIN	String	CONTRACTORTIN for Report VoucherRegister
COSTCENTRENAME	String	COSTCENTRENAME for Report VoucherRegister
COUNTRYOFRESIDENCE	String	COUNTRYOFRESIDENCE for Report VoucherRegister
CREDITLETTERDATE	Date	CREDITLETTERDATE for Report VoucherRegister
CREDITLETTERREF	String	CREDITLETTERREF for Report VoucherRegister
CSTFORMISSUEDATE	Date	CSTFORMISSUEDATE for Report VoucherRegister
CSTFORMISSUENUMBER	String	CSTFORMISSUENUMBER for Report VoucherRegister
CSTFORMISSUESERIESNUM	String	CSTFORMISSUESERIESNUM for Report VoucherRegister
CSTFORMISSUETYPE	String	CSTFORMISSUETYPE for Report VoucherRegister
CSTFORMRECVDATE	Date	CSTFORMRECVDATE for Report VoucherRegister
CSTFORMRECVNUMBER	String	CSTFORMRECVNUMBER for Report VoucherRegister
CSTFORMRECVSERIESNUM	String	CSTFORMRECVSERIESNUM for Report VoucherRegister
CSTFORMRECVTYPE	String	CSTFORMRECVTYPE for Report VoucherRegister
CURBOMNAME	String	CURBOMNAME for Report VoucherRegister
CURRBASICBUYERNAME	String	CURRBASICBUYERNAME for Report VoucherRegister
CURRBASICPURCHASEORDERNO	String	CURRBASICPURCHASEORDERNO for Report VoucherRegister
CURRBASICSHIPDELIVERYNOTE	String	CURRBASICSHIPDELIVERYNOTE for Report VoucherRegister
CURRBUYERADDRESSTYPE	String	CURRBUYERADDRESSTYPE for Report VoucherRegister
CURRPARTYADDRESSTYPE	String	CURRPARTYADDRESSTYPE for Report VoucherRegister
CURRPARTYLEDGERNAME	String	CURRPARTYLEDGERNAME for Report VoucherRegister
CURRPARTYNAME	String	CURRPARTYNAME for Report VoucherRegister
CURRSTATENAME	String	CURRSTATENAME for Report VoucherRegister
CUSTOMDUTYPAID	String	CUSTOMDUTYPAID for Report VoucherRegister
DATE	Date	DATE for Report VoucherRegister
DELIVERYCITY	String	DELIVERYCITY for Report VoucherRegister
DELIVERYOTHERS	String	DELIVERYOTHERS for Report VoucherRegister
DELIVERYPINCODE	String	DELIVERYPINCODE for Report VoucherRegister
DELIVERYSTATE	String	DELIVERYSTATE for Report VoucherRegister
DESTINATIONGODOWN	String	DESTINATIONGODOWN for Report VoucherRegister
DESTINATIONPERMITNUMBER	String	DESTINATIONPERMITNUMBER for Report VoucherRegister
DESTINATIONTAXUNIT	String	DESTINATIONTAXUNIT for Report VoucherRegister
DIFFACTUALQTY	String	DIFFACTUALQTY for Report VoucherRegister
DISPATCHCITY	String	DISPATCHCITY for Report VoucherRegister
DISPATCHDATE	Date	DISPATCHDATE for Report VoucherRegister
DISPATCHPINCODE	String	DISPATCHPINCODE for Report VoucherRegister
DUTYHEADDETAILS_LIST	String	DUTYHEADDETAILS_LIST for Report VoucherRegister
ECDATE	Date	ECDATE for Report VoucherRegister
ECFEEAMOUNT	String	ECFEEAMOUNT for Report VoucherRegister
ECFEEDEPOSITBYAWARDER	String	ECFEEDEPOSITBYAWARDER for Report VoucherRegister
ECFEEDEPOSITBYCONTRACTOR	String	ECFEEDEPOSITBYCONTRACTOR for Report VoucherRegister
ECFEERATE	String	ECFEERATE for Report VoucherRegister
ECISSUINGAUTHORITY	String	ECISSUINGAUTHORITY for Report VoucherRegister
ECNUMBER	String	ECNUMBER for Report VoucherRegister
EFFECTIVEDATE	Date	EFFECTIVEDATE for Report VoucherRegister
EICHECKPOST	String	EICHECKPOST for Report VoucherRegister
EIDEFAULTLED_CLASSADDLRATE	String	EIDEFAULTLED_CLASSADDLRATE for Report VoucherRegister
EIDEFAULTLED_CLASSNAME	String	EIDEFAULTLED_CLASSNAME for Report VoucherRegister
EIDEFAULTLED_CLASSRATE	String	EIDEFAULTLED_CLASSRATE for Report VoucherRegister
EIDEFAULTLED_ISUSERDEFINED	String	EIDEFAULTLED_ISUSERDEFINED for Report VoucherRegister
EIDEFAULTLED_ISZRBASICSERVICE	String	EIDEFAULTLED_ISZRBASICSERVICE for Report VoucherRegister
EMIRATEPOS	String	EMIRATEPOS for Report VoucherRegister
ENTEREDBY	String	ENTEREDBY for Report VoucherRegister
ENTRYCHECKPOSTLOCATION	String	ENTRYCHECKPOSTLOCATION for Report VoucherRegister
EWAYBILLDETAILS_LIST	String	EWAYBILLDETAILS_LIST for Report VoucherRegister
EXCHGCURRENCYNAME	String	EXCHGCURRENCYNAME for Report VoucherRegister
EXCHGRATE	String	EXCHGRATE for Report VoucherRegister
EXCISECLASSIFICATIONNAME	String	EXCISECLASSIFICATIONNAME for Report VoucherRegister
EXCISENOTIFICATIONNO	String	EXCISENOTIFICATIONNO for Report VoucherRegister
EXCISENOTIFICATIONSERIALNO	String	EXCISENOTIFICATIONSERIALNO for Report VoucherRegister
EXCISEOPENING	String	EXCISEOPENING for Report VoucherRegister
EXCISETARIFFTYPE	String	EXCISETARIFFTYPE for Report VoucherRegister
EXCISETAXOVERRIDE	String	EXCISETAXOVERRIDE for Report VoucherRegister
EXCISETREASURYNAME	String	EXCISETREASURYNAME for Report VoucherRegister
EXCISETREASURYNUMBER	String	EXCISETREASURYNUMBER for Report VoucherRegister
EXCISEUNITNAME	String	EXCISEUNITNAME for Report VoucherRegister
EXCLUDEDTAXATIONS_LIST	String	EXCLUDEDTAXATIONS_LIST for Report VoucherRegister
EXITCHECKPOSTLOCATION	String	EXITCHECKPOSTLOCATION for Report VoucherRegister
EXPORTERCOUNTRY	String	EXPORTERCOUNTRY for Report VoucherRegister
FBTFROMDATE	Date	FBTFROMDATE for Report VoucherRegister
FBTPAYMENTTYPE	String	FBTPAYMENTTYPE for Report VoucherRegister
FBTTODATE	Date	FBTTODATE for Report VoucherRegister
FOREIGNSELLERNAME	String	FOREIGNSELLERNAME for Report VoucherRegister
FORJOBCOSTING	String	FORJOBCOSTING for Report VoucherRegister
FORM16ISSUEDATE	Date	FORM16ISSUEDATE for Report VoucherRegister
FWDAGENTNAME	String	FWDAGENTNAME for Report VoucherRegister
GOODSRCPTDATE	Date	GOODSRCPTDATE for Report VoucherRegister
GOODSVEHICLENUMBER	String	GOODSVEHICLENUMBER for Report VoucherRegister
GSTACTIVITYSTATUS	String	GSTACTIVITYSTATUS for Report VoucherRegister
GSTADDITIONALDETAILS	String	GSTADDITIONALDETAILS for Report VoucherRegister
GSTBANKACCOUNTHOLDER	String	GSTBANKACCOUNTHOLDER for Report VoucherRegister
GSTBANKACCOUNTNUMBER	String	GSTBANKACCOUNTNUMBER for Report VoucherRegister
GSTBANKACCOUNTTYPE	String	GSTBANKACCOUNTTYPE for Report VoucherRegister
GSTBANKBRANCHADDRESS	String	GSTBANKBRANCHADDRESS for Report VoucherRegister
GSTBANKBRANCHNAME	String	GSTBANKBRANCHNAME for Report VoucherRegister
GSTBANKIFSCCODE	String	GSTBANKIFSCCODE for Report VoucherRegister
GSTBANKMICRCODE	String	GSTBANKMICRCODE for Report VoucherRegister
GSTBANKNAME	String	GSTBANKNAME for Report VoucherRegister
GSTCHALLANDATE	Date	GSTCHALLANDATE for Report VoucherRegister
GSTCHALLANEXPIRYDATE	Date	GSTCHALLANEXPIRYDATE for Report VoucherRegister
GSTCHALLANNUMBER	String	GSTCHALLANNUMBER for Report VoucherRegister
GSTCINNUMBER	String	GSTCINNUMBER for Report VoucherRegister
GSTCPINNUMBER	String	GSTCPINNUMBER for Report VoucherRegister
GSTDEBITDOCNUMBER	String	GSTDEBITDOCNUMBER for Report VoucherRegister
GSTEWAYCONSIGNEEADDRESS_LIST	String	GSTEWAYCONSIGNEEADDRESS_LIST for Report VoucherRegister
GSTEWAYCONSIGNORADDRESS_LIST	String	GSTEWAYCONSIGNORADDRESS_LIST for Report VoucherRegister
GSTINSTRUMENTNUMBER	String	GSTINSTRUMENTNUMBER for Report VoucherRegister
GSTINVASSESSABLEVALUE	String	GSTINVASSESSABLEVALUE for Report VoucherRegister
GSTITCDOCUMENTTYPE	String	GSTITCDOCUMENTTYPE for Report VoucherRegister
GSTITCREVERSALDETAILS	String	GSTITCREVERSALDETAILS for Report VoucherRegister
GSTMERCHANTID	String	GSTMERCHANTID for Report VoucherRegister
GSTNATUREOFRETURN	String	GSTNATUREOFRETURN for Report VoucherRegister
GSTNOTEXPORTED	String	GSTNOTEXPORTED for Report VoucherRegister
GSTPYMTMODEOFDEPOSIT	String	GSTPYMTMODEOFDEPOSIT for Report VoucherRegister
GSTREASONFORREJECTION	String	GSTREASONFORREJECTION for Report VoucherRegister
GSTRECONSTATUS	String	GSTRECONSTATUS for Report VoucherRegister
GSTREGISTRATIONTYPE	String	GSTREGISTRATIONTYPE for Report VoucherRegister
GUID	String	GUID for Report VoucherRegister
HASCASHFLOW	String	HASCASHFLOW for Report VoucherRegister
HASDISCOUNTS	String	HASDISCOUNTS for Report VoucherRegister
HOLDREFERENCE	String	HOLDREFERENCE for Report VoucherRegister
IGNOREGSTINVALIDATION	String	IGNOREGSTINVALIDATION for Report VoucherRegister
IGNOREORIGVCHDATE	String	IGNOREORIGVCHDATE for Report VoucherRegister
IGNOREPOSVALIDATION	String	IGNOREPOSVALIDATION for Report VoucherRegister
IMPORTEREXPORTERCODE	String	IMPORTEREXPORTERCODE for Report VoucherRegister
INCLUDEADVPYMTVCH	String	INCLUDEADVPYMTVCH for Report VoucherRegister
INSPDOCDATE	Date	INSPDOCDATE for Report VoucherRegister
INSPDOCNO	String	INSPDOCNO for Report VoucherRegister
INVDELIVERYDATE	Date	INVDELIVERYDATE for Report VoucherRegister
INVENTORYENTRIESIN_LIST	String	INVENTORYENTRIESIN_LIST for Report VoucherRegister
INVENTORYENTRIESOUT_LIST	String	INVENTORYENTRIESOUT_LIST for Report VoucherRegister
INVOICEDELNOTES_LIST	String	INVOICEDELNOTES_LIST for Report VoucherRegister
INVOICEEXPORTLIST_LIST	String	INVOICEEXPORTLIST_LIST for Report VoucherRegister
INVOICEINDENTLIST_LIST	String	INVOICEINDENTLIST_LIST for Report VoucherRegister
INVOICEORDERLIST_LIST	String	INVOICEORDERLIST_LIST for Report VoucherRegister
ISATTDDATAPRESERVED	String	ISATTDDATAPRESERVED for Report VoucherRegister
ISBLANKCHEQUE	String	ISBLANKCHEQUE for Report VoucherRegister
ISBOENOTAPPLICABLE	String	ISBOENOTAPPLICABLE for Report VoucherRegister
ISCANCELLED	String	ISCANCELLED for Report VoucherRegister
ISCOSTCENTRE	String	ISCOSTCENTRE for Report VoucherRegister
ISCSTAGTFORMC	String	ISCSTAGTFORMC for Report VoucherRegister
ISDECLAREDTOCUSTOMS	String	ISDECLAREDTOCUSTOMS for Report VoucherRegister
ISDELETED	String	ISDELETED for Report VoucherRegister
ISDELIVERYSAMEASCONSIGNEE	String	ISDELIVERYSAMEASCONSIGNEE for Report VoucherRegister
ISDESIGNATEDZONEPARTY	String	ISDESIGNATEDZONEPARTY for Report VoucherRegister
ISDISPATCHSAMEASCONSIGNOR	String	ISDISPATCHSAMEASCONSIGNOR for Report VoucherRegister
ISEXCISEMANUFACTURERON	String	ISEXCISEMANUFACTURERON for Report VoucherRegister
ISEXCISEOVERRIDDEN	String	ISEXCISEOVERRIDDEN for Report VoucherRegister
ISEXCISESUPPLYVCH	String	ISEXCISESUPPLYVCH for Report VoucherRegister
ISEXCISEVOUCHER	String	ISEXCISEVOUCHER for Report VoucherRegister
ISFORJOBWORKIN	String	ISFORJOBWORKIN for Report VoucherRegister
ISGSTOVERRIDDEN	String	ISGSTOVERRIDDEN for Report VoucherRegister
ISINVOICE	String	ISINVOICE for Report VoucherRegister
ISISDVOUCHER	String	ISISDVOUCHER for Report VoucherRegister
ISMSTFROMSYNC	String	ISMSTFROMSYNC for Report VoucherRegister
ISONHOLD	String	ISONHOLD for Report VoucherRegister
ISOPTIONAL	String	ISOPTIONAL for Report VoucherRegister
ISOVERSEASTOURISTTRANS	String	ISOVERSEASTOURISTTRANS for Report VoucherRegister
ISPOSTDATED	String	ISPOSTDATED for Report VoucherRegister
ISSERVICETAXOVERRIDDEN	String	ISSERVICETAXOVERRIDDEN for Report VoucherRegister
ISSHIPPINGWITHINSTATE	String	ISSHIPPINGWITHINSTATE for Report VoucherRegister
ISSTXNONREALIZEDVCH	String	ISSTXNONREALIZEDVCH for Report VoucherRegister
ISSUBWORKSCONTRACT	String	ISSUBWORKSCONTRACT for Report VoucherRegister
ISTCSOVERRIDDEN	String	ISTCSOVERRIDDEN for Report VoucherRegister
ISTDSOVERRIDDEN	String	ISTDSOVERRIDDEN for Report VoucherRegister
ISTDSTCSCASHVCH	String	ISTDSTCSCASHVCH for Report VoucherRegister
ISVATDUTYPAID	String	ISVATDUTYPAID for Report VoucherRegister
ISVATOVERRIDDEN	String	ISVATOVERRIDDEN for Report VoucherRegister
ISVATPAIDATCUSTOMS	String	ISVATPAIDATCUSTOMS for Report VoucherRegister
ISVATPRINCIPALACCOUNT	String	ISVATPRINCIPALACCOUNT for Report VoucherRegister
ISVATRESTAXINVOICE	String	ISVATRESTAXINVOICE for Report VoucherRegister
ISVOID	String	ISVOID for Report VoucherRegister
LBTMAPPEDCATEGORY	String	LBTMAPPEDCATEGORY for Report VoucherRegister
LBTMAPPEDZONE	String	LBTMAPPEDZONE for Report VoucherRegister
LBTNATUREOFLIABILITY	String	LBTNATUREOFLIABILITY for Report VoucherRegister
LEDGERENTRIES_LIST	String	LEDGERENTRIES_LIST for Report VoucherRegister
LORRYRECPTDATE	Date	LORRYRECPTDATE for Report VoucherRegister
LORRYRECPTNO	String	LORRYRECPTNO for Report VoucherRegister
LUTDATEOFISSUE	Date	LUTDATEOFISSUE for Report VoucherRegister
LUTEXPIRYDATE	Date	LUTEXPIRYDATE for Report VoucherRegister
LUTNUMBER	String	LUTNUMBER for Report VoucherRegister
MASTERID	String	MASTERID for Report VoucherRegister
MFGJOURNAL	String	MFGJOURNAL for Report VoucherRegister
MFGRADDRESSTYPE	String	MFGRADDRESSTYPE for Report VoucherRegister
NARRATION	String	NARRATION for Report VoucherRegister
NATUREOFSALES	String	NATUREOFSALES for Report VoucherRegister
OLDAUDITENTRIES_LIST	String	OLDAUDITENTRIES_LIST for Report VoucherRegister
ORDERLINESTATUS	String	ORDERLINESTATUS for Report VoucherRegister
ORIGINVOICEDETAILS_LIST	String	ORIGINVOICEDETAILS_LIST for Report VoucherRegister
PARTYADDRESSTYPE	String	PARTYADDRESSTYPE for Report VoucherRegister
PARTYGSTIN	String	PARTYGSTIN for Report VoucherRegister
PARTYINVDATE	Date	PARTYINVDATE for Report VoucherRegister
PARTYINVNO	String	PARTYINVNO for Report VoucherRegister
PARTYLEDGERNAME	String	PARTYLEDGERNAME for Report VoucherRegister
PARTYNAME	String	PARTYNAME for Report VoucherRegister
PARTYORDERDATE	Date	PARTYORDERDATE for Report VoucherRegister
PARTYORDERNO	String	PARTYORDERNO for Report VoucherRegister
PAYROLLMODEOFPAYMENT_LIST	String	PAYROLLMODEOFPAYMENT_LIST for Report VoucherRegister
PERSISTEDVIEW	String	PERSISTEDVIEW for Report VoucherRegister
PLACEOFSUPPLY	String	PLACEOFSUPPLY for Report VoucherRegister
PLACEOFSUPPLYCOUNTRY	String	PLACEOFSUPPLYCOUNTRY for Report VoucherRegister
PLACEOFSUPPLYSTATE	String	PLACEOFSUPPLYSTATE for Report VoucherRegister
POINTOFTRANSACTION	String	POINTOFTRANSACTION for Report VoucherRegister
PORTCODE	String	PORTCODE for Report VoucherRegister
PORTNAME	String	PORTNAME for Report VoucherRegister
POSCARDLEDGER	String	POSCARDLEDGER for Report VoucherRegister
POSCARDNUMBER	String	POSCARDNUMBER for Report VoucherRegister
POSCASHLEDGER	String	POSCASHLEDGER for Report VoucherRegister
POSCASHRECEIVED	String	POSCASHRECEIVED for Report VoucherRegister
POSCHEQUEBANKNAME	String	POSCHEQUEBANKNAME for Report VoucherRegister
POSCHEQUELEDGER	String	POSCHEQUELEDGER for Report VoucherRegister
POSCHEQUENUMBER	String	POSCHEQUENUMBER for Report VoucherRegister
POSGIFTLEDGER	String	POSGIFTLEDGER for Report VoucherRegister
POSSTAXPARTYLEDGERNAME	String	POSSTAXPARTYLEDGERNAME for Report VoucherRegister
PREVBOMNAME	String	PREVBOMNAME for Report VoucherRegister
PRICELEVEL	String	PRICELEVEL for Report VoucherRegister
PRIORITYSTATECONFLICT	String	PRIORITYSTATECONFLICT for Report VoucherRegister
PROCESSINGDURATION	String	PROCESSINGDURATION for Report VoucherRegister
PURPOSEOFPURCHASE	String	PURPOSEOFPURCHASE for Report VoucherRegister
RECONCILATIONDATE	Date	RECONCILATIONDATE for Report VoucherRegister
REFERENCE	String	REFERENCE for Report VoucherRegister
REFERENCEDATE	Date	REFERENCEDATE for Report VoucherRegister
REFUNDVOUCHERDATE	Date	REFUNDVOUCHERDATE for Report VoucherRegister
REFUNDVOUCHERNUMBER	String	REFUNDVOUCHERNUMBER for Report VoucherRegister
REQUESTORRULE	String	REQUESTORRULE for Report VoucherRegister
RETURNINVOICEDATE	Date	RETURNINVOICEDATE for Report VoucherRegister
SERIALMASTER	String	SERIALMASTER for Report VoucherRegister
SERIALNUMBER	String	SERIALNUMBER for Report VoucherRegister
SETTLEMENTTYPE	String	SETTLEMENTTYPE for Report VoucherRegister
SHIPAGENTNAME	String	SHIPAGENTNAME for Report VoucherRegister
SHIPNAME	String	SHIPNAME for Report VoucherRegister
SHIPPINGBILLDATE	Date	SHIPPINGBILLDATE for Report VoucherRegister
SHIPPINGBILLNO	String	SHIPPINGBILLNO for Report VoucherRegister
SRVTREGNUMBER	String	SRVTREGNUMBER for Report VoucherRegister
STATADJUSTMENTTYPE	String	STATADJUSTMENTTYPE for Report VoucherRegister
STATENAME	String	STATENAME for Report VoucherRegister
STATPAYMENTTYPE	String	STATPAYMENTTYPE for Report VoucherRegister
STTAXBANKCHALLANNUMBER	String	STTAXBANKCHALLANNUMBER for Report VoucherRegister
STTAXCHALLANDATE	Date	STTAXCHALLANDATE for Report VoucherRegister
STTVCHRHANDLE	String	STTVCHRHANDLE for Report VoucherRegister
SUMAUTOVCHNUM	String	SUMAUTOVCHNUM for Report VoucherRegister
SUPPLEMENTARYDUTYHEADDETAILS_LIST	String	SUPPLEMENTARYDUTYHEADDETAILS_LIS for Report VoucherRegister
SUPPLIERIECODE	String	SUPPLIERIECODE for Report VoucherRegister
SUPPLIERLBTREGNNO	String	SUPPLIERLBTREGNNO for Report VoucherRegister
SUPPLIERLBTZONE	String	SUPPLIERLBTZONE for Report VoucherRegister
TAXADJUSTMENT	String	TAXADJUSTMENT for Report VoucherRegister
TAXBANKACCOUNTNUMBER	String	TAXBANKACCOUNTNUMBER for Report VoucherRegister
TAXBANKBRANCHNAME	String	TAXBANKBRANCHNAME for Report VoucherRegister
TAXBANKCHALLANNUMBER	String	TAXBANKCHALLANNUMBER for Report VoucherRegister
TAXBANKNAME	String	TAXBANKNAME for Report VoucherRegister
TAXCHALLANBSRCODE	String	TAXCHALLANBSRCODE for Report VoucherRegister
TAXCHALLANDATE	Date	TAXCHALLANDATE for Report VoucherRegister
TAXCHEQUEDATE	Date	TAXCHEQUEDATE for Report VoucherRegister
TAXCHEQUENUMBER	String	TAXCHEQUENUMBER for Report VoucherRegister
TAXPAYMENTTYPE	String	TAXPAYMENTTYPE for Report VoucherRegister
TAXPAYPERIODFROMDATE	Date	TAXPAYPERIODFROMDATE for Report VoucherRegister
TAXPAYPERIODTODATE	Date	TAXPAYPERIODTODATE for Report VoucherRegister
TAXUNITNAME	String	TAXUNITNAME for Report VoucherRegister
TDNOFAWARDER	String	TDNOFAWARDER for Report VoucherRegister
TDSDEDNSTATUS	String	TDSDEDNSTATUS for Report VoucherRegister
TDSDEDUCTED	String	TDSDEDUCTED for Report VoucherRegister
TDSNATUREOFPAYMENT	String	TDSNATUREOFPAYMENT for Report VoucherRegister
TDSSECTIONNO	String	TDSSECTIONNO for Report VoucherRegister
TEMPCLASSNATURE	String	TEMPCLASSNATURE for Report VoucherRegister
TEMPCONSIGNEEPINCODENUMBER	String	TEMPCONSIGNEEPINCODENUMBER for Report VoucherRegister
TEMPCONSIGNORPINCODENUMBER	String	TEMPCONSIGNORPINCODENUMBER for Report VoucherRegister
TEMPGSTEWAYBILLDATE	Date	TEMPGSTEWAYBILLDATE for Report VoucherRegister
TEMPGSTEWAYBILLNUMBER	String	TEMPGSTEWAYBILLNUMBER for Report VoucherRegister
TEMPGSTEWAYCONSADDRESS	String	TEMPGSTEWAYCONSADDRESS for Report VoucherRegister
TEMPGSTEWAYCONSBILLDATE	Date	TEMPGSTEWAYCONSBILLDATE for Report VoucherRegister
TEMPGSTEWAYCONSBILLNUMBER	String	TEMPGSTEWAYCONSBILLNUMBER for Report VoucherRegister
TEMPGSTEWAYCONSFROMPLACE	String	TEMPGSTEWAYCONSFROMPLACE for Report VoucherRegister
TEMPGSTEWAYCONSIGNEE	String	TEMPGSTEWAYCONSIGNEE for Report VoucherRegister
TEMPGSTEWAYCONSIGNEEADDRESSTYPE	String	TEMPGSTEWAYCONSIGNEEADDRESSTYPE for Report VoucherRegister
TEMPGSTEWAYCONSIGNOR	String	TEMPGSTEWAYCONSIGNOR for Report VoucherRegister
TEMPGSTEWAYCONSIGNORADDRESS	String	TEMPGSTEWAYCONSIGNORADDRESS for Report VoucherRegister
TEMPGSTEWAYCONSIGNORADDRESSTYPE	String	TEMPGSTEWAYCONSIGNORADDRESSTYPE for Report VoucherRegister
TEMPGSTEWAYCONSIGNORSTATE	String	TEMPGSTEWAYCONSIGNORSTATE for Report VoucherRegister
TEMPGSTEWAYCONSIGNORTIN	String	TEMPGSTEWAYCONSIGNORTIN for Report VoucherRegister
TEMPGSTEWAYCONSPINCODE	String	TEMPGSTEWAYCONSPINCODE for Report VoucherRegister
TEMPGSTEWAYCONSPINCODENUMBER	String	TEMPGSTEWAYCONSPINCODENUMBER for Report VoucherRegister
TEMPGSTEWAYCONSSHIPFROMSTATE	String	TEMPGSTEWAYCONSSHIPFROMSTATE for Report VoucherRegister
TEMPGSTEWAYCONSSHIPTOSTATE	String	TEMPGSTEWAYCONSSHIPTOSTATE for Report VoucherRegister
TEMPGSTEWAYCONSSTATE	String	TEMPGSTEWAYCONSSTATE for Report VoucherRegister
TEMPGSTEWAYCONSTIN	String	TEMPGSTEWAYCONSTIN for Report VoucherRegister
TEMPGSTEWAYDISTANCE	String	TEMPGSTEWAYDISTANCE for Report VoucherRegister
TEMPGSTEWAYDOCUMENTTYPE	String	TEMPGSTEWAYDOCUMENTTYPE for Report VoucherRegister
TEMPGSTEWAYFROMPLACE	String	TEMPGSTEWAYFROMPLACE for Report VoucherRegister
TEMPGSTEWAYPINCODE	String	TEMPGSTEWAYPINCODE for Report VoucherRegister
TEMPGSTEWAYPINCODENUMBER	String	TEMPGSTEWAYPINCODENUMBER for Report VoucherRegister
TEMPGSTEWAYSTATUS	String	TEMPGSTEWAYSTATUS for Report VoucherRegister
TEMPGSTEWAYSUBTYPE	String	TEMPGSTEWAYSUBTYPE for Report VoucherRegister
TEMPGSTEWAYTRANSPORTERDOCDATE	Date	TEMPGSTEWAYTRANSPORTERDOCDATE for Report VoucherRegister
TEMPGSTEWAYTRANSPORTERDOCNO	String	TEMPGSTEWAYTRANSPORTERDOCNO for Report VoucherRegister
TEMPGSTEWAYTRANSPORTERID	String	TEMPGSTEWAYTRANSPORTERID for Report VoucherRegister
TEMPGSTEWAYTRANSPORTERNAME	String	TEMPGSTEWAYTRANSPORTERNAME for Report VoucherRegister
TEMPGSTEWAYTRANSPORTMODE	String	TEMPGSTEWAYTRANSPORTMODE for Report VoucherRegister
TEMPGSTEWAYVEHICLENUMBER	String	TEMPGSTEWAYVEHICLENUMBER for Report VoucherRegister
TEMPGSTEWAYVEHICLETYPE	String	TEMPGSTEWAYVEHICLETYPE for Report VoucherRegister
TEMPGSTOVRDNINELIGIBLEITC	String	TEMPGSTOVRDNINELIGIBLEITC for Report VoucherRegister
TEMPGSTOVRDNINELIGIBLEITCSTR	String	TEMPGSTOVRDNINELIGIBLEITCSTR for Report VoucherRegister
TEMPGSTOVRDNISREVCHARGEAPPL	String	TEMPGSTOVRDNISREVCHARGEAPPL for Report VoucherRegister
TEMPGSTOVRDNISREVCHARGEAPPLSTR	String	TEMPGSTOVRDNISREVCHARGEAPPLSTR for Report VoucherRegister
TEMPGSTOVRDNTAXABILITY	String	TEMPGSTOVRDNTAXABILITY for Report VoucherRegister
TEMPGSTRATEDETAILS.LIST	String	TEMPGSTRATEDETAILS.LIST for Report VoucherRegister
TEMPISUSERDEFINEDCLASS	String	TEMPISUSERDEFINEDCLASS for Report VoucherRegister
TEMPISVCHSUPPLFILLED	String	TEMPISVCHSUPPLFILLED for Report VoucherRegister
TEMPVATCLASSIFICATION	String	TEMPVATCLASSIFICATION for Report VoucherRegister
TRANSBUYERLANDINGDATE	Date	TRANSBUYERLANDINGDATE for Report VoucherRegister
TRANSCATEGORY	String	TRANSCATEGORY for Report VoucherRegister
TRANSPORTERADDRAREA	String	TRANSPORTERADDRAREA for Report VoucherRegister
TRANSPORTERADDRBLDG	String	TRANSPORTERADDRBLDG for Report VoucherRegister
TRANSPORTERADDRDIST	String	TRANSPORTERADDRDIST for Report VoucherRegister
TRANSPORTERADDRFAX	String	TRANSPORTERADDRFAX for Report VoucherRegister
TRANSPORTERADDRPHONE	String	TRANSPORTERADDRPHONE for Report VoucherRegister
TRANSPORTERADDRPINCODE	String	TRANSPORTERADDRPINCODE for Report VoucherRegister
TRANSPORTERADDRROAD	String	TRANSPORTERADDRROAD for Report VoucherRegister
TRANSPORTERADDRROOM	String	TRANSPORTERADDRROOM for Report VoucherRegister
TRANSPORTERADDRSTATE	String	TRANSPORTERADDRSTATE for Report VoucherRegister
TRANSPORTERADDRTOWN	String	TRANSPORTERADDRTOWN for Report VoucherRegister
TRANSPORTERNAME	String	TRANSPORTERNAME for Report VoucherRegister
TRANSPORTERVEHICLE2	String	TRANSPORTERVEHICLE2 for Report VoucherRegister
TRANSPORTLOCALTIN	String	TRANSPORTLOCALTIN for Report VoucherRegister
TRANSPORTMODE	String	TRANSPORTMODE for Report VoucherRegister
TRANSSALELANDINGDATE	Date	TRANSSALELANDINGDATE for Report VoucherRegister
TRANSSOURCEPLACE	String	TRANSSOURCEPLACE for Report VoucherRegister
TYPEOFEXCISEVOUCHER	String	TYPEOFEXCISEVOUCHER for Report VoucherRegister
URDORIGINALSALEVALUE	String	URDORIGINALSALEVALUE for Report VoucherRegister
USEFORCOMPOUND	String	USEFORCOMPOUND for Report VoucherRegister
USEFOREXCISE	String	USEFOREXCISE for Report VoucherRegister
USEFORFINALPRODUCTION	String	USEFORFINALPRODUCTION for Report VoucherRegister
USEFORGAINLOSS	String	USEFORGAINLOSS for Report VoucherRegister
USEFORGODOWNTRANSFER	String	USEFORGODOWNTRANSFER for Report VoucherRegister
USEFORINTEREST	String	USEFORINTEREST for Report VoucherRegister
USEFORSERVICETAX	String	USEFORSERVICETAX for Report VoucherRegister
USEFORTAXUNITTRANSFER	String	USEFORTAXUNITTRANSFER for Report VoucherRegister
USETRACKINGNUMBER	String	USETRACKINGNUMBER for Report VoucherRegister
VALUEOFSUBWORKSCONT	String	VALUEOFSUBWORKSCONT for Report VoucherRegister
VALUEOFWORKSCONTRACT	String	VALUEOFWORKSCONTRACT for Report VoucherRegister
VATADJADDLDETAILS	String	VATADJADDLDETAILS for Report VoucherRegister
VATADJUSTMENTTYPE	String	VATADJUSTMENTTYPE for Report VoucherRegister
VATBANKACCNUMBER	String	VATBANKACCNUMBER for Report VoucherRegister
VATBANKBRANCH	String	VATBANKBRANCH for Report VoucherRegister
VATBANKNAME	String	VATBANKNAME for Report VoucherRegister
VATBRANCHCODE	String	VATBRANCHCODE for Report VoucherRegister
VATBRANCHNAME	String	VATBRANCHNAME for Report VoucherRegister
VATBRIEFDESCRIPTION	String	VATBRIEFDESCRIPTION for Report VoucherRegister
VATCANCINVDATE	Date	VATCANCINVDATE for Report VoucherRegister
VATCANCINVNO	String	VATCANCINVNO for Report VoucherRegister
VATCANCPURCNAME	String	VATCANCPURCNAME for Report VoucherRegister
VATCANCPURCTIN	String	VATCANCPURCTIN for Report VoucherRegister
VATCERTIFICATENO	String	VATCERTIFICATENO for Report VoucherRegister
VATCFORMISSUESTATE	String	VATCFORMISSUESTATE for Report VoucherRegister
VATCHALLANDATE	Date	VATCHALLANDATE for Report VoucherRegister
VATCHALLANNUMBER	String	VATCHALLANNUMBER for Report VoucherRegister
VATCONSIGNMENTNO	String	VATCONSIGNMENTNO for Report VoucherRegister
VATCONTRACTEEDISTRICT	String	VATCONTRACTEEDISTRICT for Report VoucherRegister
VATCONTRACTEENAME	String	VATCONTRACTEENAME for Report VoucherRegister
VATCONTRACTEETDN	String	VATCONTRACTEETDN for Report VoucherRegister
VATCSTE1DATE	Date	VATCSTE1DATE for Report VoucherRegister
VATCSTE1SERIALNO	String	VATCSTE1SERIALNO for Report VoucherRegister
VATCSTE1SERIESNO	String	VATCSTE1SERIESNO for Report VoucherRegister
VATDDCHEQUEDATE	Date	VATDDCHEQUEDATE for Report VoucherRegister
VATDDCHEQUENO	String	VATDDCHEQUENO for Report VoucherRegister
VATDEALERTYPE	String	VATDEALERTYPE for Report VoucherRegister
VATDEPOSITDATE	Date	VATDEPOSITDATE for Report VoucherRegister
VATDESIGOFPURCHASER	String	VATDESIGOFPURCHASER for Report VoucherRegister
VATDESTINATIONPLACE	String	VATDESTINATIONPLACE for Report VoucherRegister
VATDESTINATIONSTATE	String	VATDESTINATIONSTATE for Report VoucherRegister
VATDEVICENO	String	VATDEVICENO for Report VoucherRegister
VATDISPATCHTIME	String	VATDISPATCHTIME for Report VoucherRegister
VATDOCUMENTDATE	Date	VATDOCUMENTDATE for Report VoucherRegister
VATDOCUMENTNUMBER	String	VATDOCUMENTNUMBER for Report VoucherRegister
VATDOCUMENTTYPE	String	VATDOCUMENTTYPE for Report VoucherRegister
VATEFORMAPPLICABLE	String	VATEFORMAPPLICABLE for Report VoucherRegister
VATEFORMAPPLICABLENO	String	VATEFORMAPPLICABLENO for Report VoucherRegister
VATEXEMPTCERTIFICATENO	String	VATEXEMPTCERTIFICATENO for Report VoucherRegister
VATEXPORTENTRYNO	String	VATEXPORTENTRYNO for Report VoucherRegister
VATFORMSTATUS	String	VATFORMSTATUS for Report VoucherRegister
VATGOODSRCPTNO	String	VATGOODSRCPTNO for Report VoucherRegister
VATGOODSRECEIPTDATE	Date	VATGOODSRECEIPTDATE for Report VoucherRegister
VATGOODSRECEIPTNUMBER	String	VATGOODSRECEIPTNUMBER for Report VoucherRegister
VATGOODSVALUE	String	VATGOODSVALUE for Report VoucherRegister
VATINCOURSEOF	String	VATINCOURSEOF for Report VoucherRegister
VATISAGNSTCANCSALES	String	VATISAGNSTCANCSALES for Report VoucherRegister
VATISASSESABLECALCVCH	String	VATISASSESABLECALCVCH for Report VoucherRegister
VATISPURCEXEMPTED	String	VATISPURCEXEMPTED for Report VoucherRegister
VATMOBILENUMBER	String	VATMOBILENUMBER for Report VoucherRegister
VATORDERDATE	Date	VATORDERDATE for Report VoucherRegister
VATORDERNO	String	VATORDERNO for Report VoucherRegister
VATPAIDAGAINST	String	VATPAIDAGAINST for Report VoucherRegister
VATPARTYITCCLAIMED	String	VATPARTYITCCLAIMED for Report VoucherRegister
VATPARTYORGNAME	String	VATPARTYORGNAME for Report VoucherRegister
VATPARTYORGTYPE	String	VATPARTYORGTYPE for Report VoucherRegister
VATPARTYTAXLIABILITY	String	VATPARTYTAXLIABILITY for Report VoucherRegister
VATPARTYTRANSRETURNDATE	Date	VATPARTYTRANSRETURNDATE for Report VoucherRegister
VATPARTYTRANSRETURNNUMBER	String	VATPARTYTRANSRETURNNUMBER for Report VoucherRegister
VATPARTYTYPE	String	VATPARTYTYPE for Report VoucherRegister
VATPERMITFORM	String	VATPERMITFORM for Report VoucherRegister
VATPURCHASERCPTTYPE	String	VATPURCHASERCPTTYPE for Report VoucherRegister
VATPYMTMODEOFDEPOSIT	String	VATPYMTMODEOFDEPOSIT for Report VoucherRegister
VATPYMTTAXDESC	String	VATPYMTTAXDESC for Report VoucherRegister
VATSELLERTIN	String	VATSELLERTIN for Report VoucherRegister
VATSOURCESTATE	String	VATSOURCESTATE for Report VoucherRegister
VATSUBMISSIONDATE	Date	VATSUBMISSIONDATE for Report VoucherRegister
VATTDSAMT	String	VATTDSAMT for Report VoucherRegister
VATTDSBARCODE	String	VATTDSBARCODE for Report VoucherRegister
VATTDSDATE	Date	VATTDSDATE for Report VoucherRegister
VATTDSDEDUCTORNAME	String	VATTDSDEDUCTORNAME for Report VoucherRegister
VATTDSRATE	String	VATTDSRATE for Report VoucherRegister
VATTRANSBILLNO	String	VATTRANSBILLNO for Report VoucherRegister
VATTRANSBILLQTY	String	VATTRANSBILLQTY for Report VoucherRegister
VATTRANSPORTERADDRESS	String	VATTRANSPORTERADDRESS for Report VoucherRegister
VATTRANSSOURCE	String	VATTRANSSOURCE for Report VoucherRegister
VATTYPEOFDEVICE	String	VATTYPEOFDEVICE for Report VoucherRegister
VATVEHICLENUMBER	String	VATVEHICLENUMBER for Report VoucherRegister
VCHGSTCLASS	String	VCHGSTCLASS for Report VoucherRegister
VCHTAXTYPE	String	VCHTAXTYPE for Report VoucherRegister
VCHTAXUNIT	String	VCHTAXUNIT for Report VoucherRegister
VOUCHERDESTINATIONGODOWN	String	VOUCHERDESTINATIONGODOWN for Report VoucherRegister
VOUCHERKEY	Long	VOUCHERKEY for Report VoucherRegister
VOUCHERNUMBER	String	VOUCHERNUMBER for Report VoucherRegister
VOUCHERSOURCEGODOWN	String	VOUCHERSOURCEGODOWN for Report VoucherRegister
VOUCHERTIME	String	VOUCHERTIME for Report VoucherRegister
VOUCHERTYPENAME	String	VOUCHERTYPENAME for Report VoucherRegister
VOUCHERTYPEORIGNAME	String	VOUCHERTYPEORIGNAME for Report VoucherRegister
FromDate	Date	This is a mirror column.
ToDate	Date	This is a mirror column.

Pseudo-Columns

Pseudo column fields are used in the WHERE clause of SELECT statements and offer more granular control over the data returned from the data source.


Name	Type	Description
Company	String	Name of the Company whose data need to be fetched. Please make sure it is selected and unlocked atleast once in the Tally tool after the tool is launched. It need not be in the selected state at the moment.

StockItem

Retrieve StockItems.

Table Specific Information

Select

The connector will use the Tally API to process WHERE clause conditions built with the following column and operator. The rest of the filter is executed client side within the connector.

String supports the '=, !=,<, <=, >, >=, LIKE, ORDER BY' comparisons.

For example these queries are processed server side:

SELECT * FROM StockItem WHERE Narration LIKE 'Item%'

SELECT * FROM StockItem WHERE GSTApplicable != NULL

SELECT * FROM StockItem WHERE ValuationMethod = 'Default' AND CostingMethod = 'Avg. Cost'

SELECT * FROM StockItem WHERE LastSaleParty = 'OutState Party [GST Test]' OR OutwardQuantity = '0 Nos'

SELECT * FROM StockItem WHERE IsBatchWiseOn > 'No'

SELECT * FROM StockItem ORDER BY RemoteAltGUID Desc

Columns


Name	Type	Description
Name	String	The Name value of the StockItem.
ActiveFrom	Date	The ActiveFrom value of the StockItem.
ActiveTo	Date	The ActiveTo value of the StockItem.
PriceLevelDate	Date	The PriceLevelDate value of the StockItem.
Guid	String	The Guid value of the StockItem.
PriceLevel	String	The PriceLevel value of the StockItem.
Parent	String	The Parent value of the StockItem.
Category	String	The Category value of the StockItem.
Narration	String	The Narration value of the StockItem.
RemoteGUID	String	The RemoteGUID value of the StockItem.
RemoteAltGUID	String	The RemoteAltGUID value of the StockItem.
RequestorRule	String	The RequestorRule value of the StockItem.
TDSApplicable	String	The TDSApplicable value of the StockItem.
TCSApplicable	String	The TCSApplicable value of the StockItem.
GSTApplicable	String	The GSTApplicable value of the StockItem.
TaxClassificationName	String	The TaxClassificationName value of the StockItem.
Description	String	The Description value of the StockItem.
GSTTypeofSupply	String	The GSTTypeofSupply value of the StockItem.
ServiceTaxApplicable	String	The ServiceTaxApplicable value of the StockItem.
ExciseApplicability	String	The ExciseApplicability value of the StockItem.
SalesTaxCessApplicable	String	The SalesTaxCessApplicable value of the StockItem.
VATApplicable	String	The VATApplicable value of the StockItem.
LedgerName	String	The LedgerName value of the StockItem.
CostingMethod	String	The CostingMethod value of the StockItem.
ValuationMethod	String	The ValuationMethod value of the StockItem.
BaseUnits	String	The BaseUnits value of the StockItem.
AdditionalUnits	String	The AdditionalUnits value of the StockItem.
ExciseTaxType	String	The ExciseTaxType value of the StockItem.
NatureofItem	String	The NatureofItem value of the StockItem.
ExciseItemClassification	String	The ExciseItemClassification value of the StockItem.
OldBasicTariffType	String	The OldBasicTariffType value of the StockItem.
TCSCategory	String	The TCSCategory value of the StockItem.
BasicTariffType	String	The BasicTariffType value of the StockItem.
VatCommodity	String	The VatCommodity value of the StockItem.
EntryTaxCommodity	String	The EntryTaxCommodity value of the StockItem.
VatBaseUnit	String	The VatBaseUnit value of the StockItem.
VatTrailUnit	String	The VatTrailUnit value of the StockItem.
ReOrderPeriod	String	The ReOrderPeriod value of the StockItem.
ReOrderRoundType	String	The ReOrderRoundType value of the StockItem.
MinOrderPeriod	String	The MinOrderPeriod value of the StockItem.
MinOrderRoundType	String	The MinOrderRoundType value of the StockItem.
GSTRepUoM	String	The GSTRepUoM value of the StockItem.
GSTConvUnit	String	The GSTConvUnit value of the StockItem.
IsCostCentresOn	String	The IsCostCentresOn value of the StockItem.
IsBatchWiseOn	String	The IsBatchWiseOn value of the StockItem.
IsPerishableOn	String	The IsPerishableOn value of the StockItem.
IsEntryTaxApplicable	String	The IsEntryTaxApplicable value of the StockItem.
IsCostTrackingOn	String	The IsCostTrackingOn value of the StockItem.
IsMstFromSync	String	The IsMstFromSync value of the StockItem.
IsUpdatingTargetId	String	The IsUpdatingTargetId value of the StockItem.
AsOriginal	String	The AsOriginal value of the StockItem.
IsRateInclusiveVAT	String	The IsRateInclusiveVAT value of the StockItem.
IgnorePhysicalDifference	String	The IgnorePhysicalDifference value of the StockItem.
IgnoreNegativeStock	String	The IgnoreNegativeStock value of the StockItem.
TreatSalesasManufactured	String	The TreatSalesasManufactured value of the StockItem.
TreatPurchasesasConsumed	String	The TreatPurchasesasConsumed value of the StockItem.
TreatRejectsasScrap	String	The TreatRejectsasScrap value of the StockItem.
HasMfgDate	String	The HasMfgDate value of the StockItem.
AllowUseofExpiredItems	String	The AllowUseofExpiredItems value of the StockItem.
IgnoreBatches	String	The IgnoreBatches value of the StockItem.
IgnoreGodowns	String	The IgnoreGodowns value of the StockItem.
CalcOnMRP	String	The CalcOnMRP value of the StockItem.
ExcludeJrnlForValuation	String	The ExcludeJrnlForValuation value of the StockItem.
IsMRPInclOfTax	String	The IsMRPInclOfTax value of the StockItem.
IsAddlTaxExempt	String	The IsAddlTaxExempt value of the StockItem.
IsSupplementryDutyOn	String	The IsSupplementryDutyOn value of the StockItem.
GVATIsExciseAppl	String	The GVATIsExciseAppl value of the StockItem.
ReOrderAsHigher	String	The ReOrderAsHigher value of the StockItem.
MinOrderAsHigher	String	The MinOrderAsHigher value of the StockItem.
IsExciseCalculateonMRP	String	The IsExciseCalculateonMRP value of the StockItem.
InclusiveTax	String	The InclusiveTax value of the StockItem.
GSTCalcSlabOnMRP	String	The GSTCalcSlabOnMRP value of the StockItem.
ModifyMRPRate	String	The ModifyMRPRate value of the StockItem.
SortPosition	Decimal	The SortPosition value of the StockItem.
Alterid	Decimal	The Alterid value of the StockItem.
RemoteAlterID	Decimal	The RemoteAlterID value of the StockItem.
Denominator	Decimal	The Denominator value of the StockItem.
Conversion	Decimal	The Conversion value of the StockItem.
RateofMRP	Decimal	The RateofMRP value of the StockItem.
BasicRateOfExcise	Decimal	The BasicRateOfExcise value of the StockItem.
RateOfEntryTax	Decimal	The RateOfEntryTax value of the StockItem.
RateofVAT	Decimal	The RateofVAT value of the StockItem.
RateofSAT	Decimal	The RateofSAT value of the StockItem.
VatBaseNo	Decimal	The VatBaseNo value of the StockItem.
VatTrailNo	Decimal	The VatTrailNo value of the StockItem.
VatActualRatio	Decimal	The VatActualRatio value of the StockItem.
ReOrderPeriodLength	Decimal	The ReOrderPeriodLength value of the StockItem.
ReOrderRoundLimit	Decimal	The ReOrderRoundLimit value of the StockItem.
MinOrderPeriodLength	Decimal	The MinOrderPeriodLength value of the StockItem.
MinOrderRoundLimit	Decimal	The MinOrderRoundLimit value of the StockItem.
GSTItemUnits	Decimal	The GSTItemUnits value of the StockItem.
GSTRepUnits	Decimal	The GSTRepUnits value of the StockItem.
OpeningBalance	String	The OpeningBalance value of the StockItem.
OpeningValue	Decimal	The OpeningValue value of the StockItem.
BasicValue	String	The BasicValue value of the StockItem.
BasicQty	String	The BasicQty value of the StockItem.
ReorderBase	String	The ReorderBase value of the StockItem.
MinimumOrderBase	String	The MinimumOrderBase value of the StockItem.
OpeningRate	String	The OpeningRate value of the StockItem.
tempGSTCGSTRate	Decimal	The tempGSTCGSTRate value of the StockItem.
tempGSTSGSTRate	Decimal	The tempGSTSGSTRate value of the StockItem.
tempGSTIGSTRate	Decimal	The tempGSTIGSTRate value of the StockItem.
tempGSTStateCessRate	Decimal	The tempGSTStateCessRate value of the StockItem.
tempIsVATfieldsEdited	String	The tempIsVATfieldsEdited value of the StockItem.
tempApplDate	Date	The tempApplDate value of the StockItem.
tempClassification	String	The tempClassification value of the StockItem.
tempNature	String	The tempNature value of the StockItem.
tempPartyEntity	String	The tempPartyEntity value of the StockItem.
tempBusinessNature	String	The tempBusinessNature value of the StockItem.
tempVATRate	Decimal	The tempVATRate value of the StockItem.
tempAddlTax	Decimal	The tempAddlTax value of the StockItem.
tempCessOnVat	Decimal	The tempCessOnVat value of the StockItem.
tempTaxType	String	The tempTaxType value of the StockItem.
tempMajorCommodityName	String	The tempMajorCommodityName value of the StockItem.
tempCommodityName	String	The tempCommodityName value of the StockItem.
tempCommodityCode	String	The tempCommodityCode value of the StockItem.
tempSubCommodityCode	String	The tempSubCommodityCode value of the StockItem.
tempUOM	String	The tempUOM value of the StockItem.
tempTypeofGoods	String	The tempTypeofGoods value of the StockItem.
tempTradeName	String	The tempTradeName value of the StockItem.
tempGoodsNature	String	The tempGoodsNature value of the StockItem.
tempSchedule	String	The tempSchedule value of the StockItem.
tempScheduleslNo	String	The tempScheduleslNo value of the StockItem.
tempIsInvDetailsEnable	String	The tempIsInvDetailsEnable value of the StockItem.
tempValuationType	String	The tempValuationType value of the StockItem.
tempIsCalcOnQty	String	The tempIsCalcOnQty value of the StockItem.
tempMRPRate	String	The tempMRPRate value of the StockItem.
tempMRPApplDate	Date	The tempMRPApplDate value of the StockItem.
MailingName	String	The MailingName value of the StockItem.
TargetRemoteId	String	The TargetRemoteId value of the StockItem.
OldAuditEntryIds	Decimal	The OldAuditEntryIds value of the StockItem.
Closingbalance	String	The Closingbalance value of the StockItem.
Inwardquantity	String	The Inwardquantity value of the StockItem.
Outwardquantity	String	The Outwardquantity value of the StockItem.
Closingvalue	Decimal	The Closingvalue value of the StockItem.
Inwardvalue	String	The Inwardvalue value of the StockItem.
Outwardvalue	Decimal	The Outwardvalue value of the StockItem.
Closingrate	String	The Closingrate value of the StockItem.
Lastsaledate	Date	The Lastsaledate value of the StockItem.
Lastsaleparty	String	The Lastsaleparty value of the StockItem.
Lastsaleprice	String	The Lastsaleprice value of the StockItem.
Lastsaleqty	String	The Lastsaleqty value of the StockItem.
Lastpurcdate	Date	The Lastpurcdate value of the StockItem.
Lastpurcparty	String	The Lastpurcparty value of the StockItem.
Lastpurcprice	String	The Lastpurcprice value of the StockItem.
Lastpurccost	String	The Lastpurccost value of the StockItem.
Lastpurcqty	String	The Lastpurcqty value of the StockItem.
Consumption	Decimal	The Consumption value of the StockItem.
Thisyearbalance	Decimal	The Thisyearbalance value of the StockItem.
Prevyearbalance	Decimal	The Prevyearbalance value of the StockItem.
Thisquarterbalance	Decimal	The Thisquarterbalance value of the StockItem.
Prevquarterbalance	Decimal	The Prevquarterbalance value of the StockItem.

Pseudo-Columns

Pseudo column fields are used in the WHERE clause of SELECT statements and offer more granular control over the data returned from the data source.


Name	Type	Description
Company	String	Name of the Company whose data need to be fetched. Please make sure it is selected and unlocked atleast once in the Tally tool after the tool is launched. It need not be in the selected state at the moment.

Stored Procedures

Stored procedures are function-like interfaces that extend the functionality of the connector beyond simple SELECT operations with Tally.

Stored procedures accept a list of parameters, perform their intended function, and then return any relevant response data from Tally, along with an indication of whether the procedure succeeded or failed.

CData Python Connector for Tally Stored Procedures


Name	Description
CreateSchema	Creates a schema definition of a table in Tally.
ExportReport	Export Report.
ImportData	Imports Data into Tally

CreateSchema

Creates a schema definition of a table in Tally.

CreateSchema

Creates a local schema file (.rsd) from an existing table or view in the data model.

The schema file is created in the directory set in the Location connection property when this procedure is executed. You can edit the file to include or exclude columns, rename columns, or adjust column datatypes.

The connector checks the Location to determine if the names of any .rsd files match a table or view in the data model. If there is a duplicate, the schema file will take precedence over the default instance of this table in the data model. If a schema file is present in Location that does not match an existing table or view, a new table or view entry is added to the data model of the connector.

Input


Name	Type	Required	Description
TableName	String	True	The name of the table.
FileName	String	False	The full file path and name of the schema to generate, required if the location connection property is not set. Ex : 'C:\\Users\\User\\Desktop\\Tally\\company.rsd'

Result Set Columns


Name	Type	Description
Result	String	Whether or not the schema was successfully downloaded.
FileData	String	If the FileName and FileStream are not provided, this contains the content of the file.

ExportReport

Export Report.

Input


Name	Type	Required	Description
ReportName	String	True	The Name of the Report to be downloaded. The allowed values are Balance Sheet, Profit and Loss, Stock Summary, Ratio Analysis, Trial Balance, RTS FilteredVouchers, Negative Stock, Negative Ledgers, Bank Group summary, Ledger Vouchers, Group Summary, Group Vouchers, Voucher Register, Bills Receivable, Bills Payable, Ledger Outstandings, Group Outstandings, Statistics, Cost Category Summary, Cost Centre Breakup, Ledger Cost Breakup, Group Cost Breakup, Godown Summary, ITEMMONTHLYSUMMARY, STOCKVOUCHERS, STOCKSUMMARY, Prlevel.
ReportParameter	String	False	Report Parameter if required for the report eg: GROUPNAME=BANK ACCOUNTS
ReportFormat	String	False	The format of the downloaded report: XML or HTML The allowed values are XML, HTML. The default value is HTML.
ExportLocation	String	False	Download location
FromDate	Date	False	From Date
ToDate	Date	False	To Date
Company	String	False	Name of the Company whose data need to be fetched. Please make sure it is selected and unlocked atleast once in the Tally tool after the tool is launched. It need not be in the selected state at the moment.
Encoding	String	False	The FileData input encoding type. The allowed values are NONE, BASE64. The default value is BASE64.

Result Set Columns


Name	Type	Description
Status	String	The status of the operation
FileData	String	If the ExportLocation and FileStream are not provided, this contains the content of the file.

ImportData

Imports Data into Tally

Input


Name	Type	Required	Description
XMLPath	String	False	Full path of the xml file to be Imported.
XMLContent	String	False	XML Content to be imported.

Result Set Columns


Name	Type	Description
Status	String	Stored procedure execution status.

System Tables

You can query the system tables described in this section to access schema information, information on data source functionality, and batch operation statistics.

Schema Tables

The following tables return database metadata for Tally:

sys_catalogs: Lists the available databases.
sys_schemas: Lists the available schemas.
sys_tables: Lists the available tables and views.
sys_tablecolumns: Describes the columns of the available tables and views.
sys_procedures: Describes the available stored procedures.
sys_procedureparameters: Describes stored procedure parameters.
sys_keycolumns: Describes the primary and foreign keys.
sys_indexes: Describes the available indexes.

Data Source Tables

The following tables return information about how to connect to and query the data source:

sys_connection_props: Returns information on the available connection properties.
sys_sqlinfo: Describes the SELECT queries that the connector can offload to the data source.

Query Information Tables

The following table returns query statistics for data modification queries

sys_identity: Returns information about batch operations or single updates.

sys_catalogs

Lists the available databases.

The following query retrieves all databases determined by the connection string:

SELECT * FROM sys_catalogs

Columns


Name	Type	Description
CatalogName	String	The database name.

sys_schemas

Lists the available schemas.

The following query retrieves all available schemas:

          SELECT * FROM sys_schemas

Columns


Name	Type	Description
CatalogName	String	The database name.
SchemaName	String	The schema name.

sys_tables

Lists the available tables.

The following query retrieves the available tables and views:

          SELECT * FROM sys_tables

Columns


Name	Type	Description
CatalogName	String	The database containing the table or view.
SchemaName	String	The schema containing the table or view.
TableName	String	The name of the table or view.
TableType	String	The table type (table or view).
Description	String	A description of the table or view.
IsUpdateable	Boolean	Whether the table can be updated.
IsInsertable	Boolean	Whether the table can be inserted into.
IsDeleteable	Boolean	Whether rows can be deleted from the table.

sys_tablecolumns

Describes the columns of the available tables and views.

The following query returns the columns and data types for the Company table:

SELECT ColumnName, DataTypeName FROM sys_tablecolumns WHERE TableName = 'Company'

Columns


Name	Type	Description
CatalogName	String	The name of the database containing the table or view.
SchemaName	String	The schema containing the table or view.
TableName	String	The name of the table or view containing the column.
ColumnName	String	The column name.
DataTypeName	String	The data type name.
DataType	Int32	An integer indicating the data type. This value is determined at run time based on the environment.
Length	Int32	The storage size of the column.
DisplaySize	Int32	The designated column's normal maximum width in characters.
NumericPrecision	Int32	The maximum number of digits in numeric data. The column length in characters for character and date-time data.
NumericScale	Int32	The column scale or number of digits to the right of the decimal point.
IsNullable	Boolean	Whether the column can contain null.
Description	String	A brief description of the column.
Ordinal	Int32	The sequence number of the column.
IsAutoIncrement	String	Whether the column value is assigned in fixed increments.
IsGeneratedColumn	String	Whether the column is generated.
IsHidden	Boolean	Whether the column is hidden.
IsArray	Boolean	Whether the column is an array.
IsReadOnly	Boolean	Whether the column is read-only.
IsKey	Boolean	Indicates whether a field returned from sys_tablecolumns is the primary key of the table.
ColumnType	String	The role or classification of the column in the schema. Possible values include SYSTEM, LINKEDCOLUMN, NAVIGATIONKEY, REFERENCECOLUMN, and NAVIGATIONPARENTCOLUMN.
ColumnCapabilities	Int32	A bit mask denoting the column's write capabilities. The value is the sum of the following: 1 if the column is required for INSERTs, 2 if the column is allowed for INSERTs, and 4 if the column is allowed for UPDATEs. A value of 0 indicates that the write capabilities of the column are unknown or that the column is read-only.

sys_procedures

Lists the available stored procedures.

The following query retrieves the available stored procedures:

          SELECT * FROM sys_procedures

Columns


Name	Type	Description
CatalogName	String	The database containing the stored procedure.
SchemaName	String	The schema containing the stored procedure.
ProcedureName	String	The name of the stored procedure.
Description	String	A description of the stored procedure.
ProcedureType	String	The type of the procedure, such as PROCEDURE or FUNCTION.

sys_procedureparameters

Describes stored procedure parameters.

The following query returns information about all of the input parameters for the CreateSchema stored procedure:

SELECT * FROM sys_procedureparameters WHERE ProcedureName = 'CreateSchema' AND Direction = 1 OR Direction = 2

To include result set columns in addition to the parameters, set the IncludeResultColumns pseudo column to True:

SELECT * FROM sys_procedureparameters WHERE ProcedureName = 'CreateSchema' AND IncludeResultColumns='True'

Columns


Name	Type	Description
CatalogName	String	The name of the database containing the stored procedure.
SchemaName	String	The name of the schema containing the stored procedure.
ProcedureName	String	The name of the stored procedure containing the parameter.
ColumnName	String	The name of the stored procedure parameter.
Direction	Int32	An integer corresponding to the type of the parameter: input (1), input/output (2), or output(4). input/output type parameters can be both input and output parameters.
DataType	Int32	An integer indicating the data type. This value is determined at run time based on the environment.
DataTypeName	String	The name of the data type.
NumericPrecision	Int32	The maximum precision for numeric data. The column length in characters for character and date-time data.
Length	Int32	The number of characters allowed for character data. The number of digits allowed for numeric data.
NumericScale	Int32	The number of digits to the right of the decimal point in numeric data.
IsNullable	Boolean	Whether the parameter can contain null.
IsRequired	Boolean	Whether the parameter is required for execution of the procedure.
IsArray	Boolean	Whether the parameter is an array.
Description	String	The description of the parameter.
Ordinal	Int32	The index of the parameter.
Values	String	The values you can set in this parameter are limited to those shown in this column. Possible values are comma-separated.
SupportsStreams	Boolean	Whether the parameter represents a file that you can pass as either a file path or a stream.
IsPath	Boolean	Whether the parameter is a target path for a schema creation operation.
Default	String	The value used for this parameter when no value is specified.
SpecificName	String	A label that, when multiple stored procedures have the same name, uniquely identifies each identically-named stored procedure. If there's only one procedure with a given name, its name is simply reflected here.
IsCDataProvided	Boolean	Whether the procedure is added/implemented by CData, as opposed to being a native Tally procedure.

Pseudo-Columns


Name	Type	Description
IncludeResultColumns	Boolean	Whether the output should include columns from the result set in addition to parameters. Defaults to False.

sys_keycolumns

Describes the primary and foreign keys.

The following query retrieves the primary key for the Company table:

         SELECT * FROM sys_keycolumns WHERE IsKey='True' AND TableName='Company'

Columns


Name	Type	Description
CatalogName	String	The name of the database containing the key.
SchemaName	String	The name of the schema containing the key.
TableName	String	The name of the table containing the key.
ColumnName	String	The name of the key column.
IsKey	Boolean	Whether the column is a primary key in the table referenced in the TableName field.
IsForeignKey	Boolean	Whether the column is a foreign key referenced in the TableName field.
PrimaryKeyName	String	The name of the primary key.
ForeignKeyName	String	The name of the foreign key.
ReferencedCatalogName	String	The database containing the primary key.
ReferencedSchemaName	String	The schema containing the primary key.
ReferencedTableName	String	The table containing the primary key.
ReferencedColumnName	String	The column name of the primary key.

sys_foreignkeys

Describes the foreign keys.

The following query retrieves all foreign keys which refer to other tables:

         SELECT * FROM sys_foreignkeys WHERE ForeignKeyType = 'FOREIGNKEY_TYPE_IMPORT'

Columns


Name	Type	Description
CatalogName	String	The name of the database containing the key.
SchemaName	String	The name of the schema containing the key.
TableName	String	The name of the table containing the key.
ColumnName	String	The name of the key column.
PrimaryKeyName	String	The name of the primary key.
ForeignKeyName	String	The name of the foreign key.
ReferencedCatalogName	String	The database containing the primary key.
ReferencedSchemaName	String	The schema containing the primary key.
ReferencedTableName	String	The table containing the primary key.
ReferencedColumnName	String	The column name of the primary key.
ForeignKeyType	String	Designates whether the foreign key is an import (points to other tables) or export (referenced from other tables) key.

sys_primarykeys

Describes the primary keys.

The following query retrieves the primary keys from all tables and views:

         SELECT * FROM sys_primarykeys

Columns


Name	Type	Description
CatalogName	String	The name of the database containing the key.
SchemaName	String	The name of the schema containing the key.
TableName	String	The name of the table containing the key.
ColumnName	String	The name of the key column.
KeySeq	String	The sequence number of the primary key.
KeyName	String	The name of the primary key.

sys_indexes

Describes the available indexes. By filtering on indexes, you can write more selective queries with faster query response times.

The following query retrieves all indexes that are not primary keys:

          SELECT * FROM sys_indexes WHERE IsPrimary='false'

Columns


Name	Type	Description
CatalogName	String	The name of the database containing the index.
SchemaName	String	The name of the schema containing the index.
TableName	String	The name of the table containing the index.
IndexName	String	The index name.
ColumnName	String	The name of the column associated with the index.
IsUnique	Boolean	True if the index is unique. False otherwise.
IsPrimary	Boolean	True if the index is a primary key. False otherwise.
Type	Int16	An integer value corresponding to the index type: statistic (0), clustered (1), hashed (2), or other (3).
SortOrder	String	The sort order: A for ascending or D for descending.
OrdinalPosition	Int16	The sequence number of the column in the index.

sys_connection_props

Returns information on the available connection properties and those set in the connection string.

The following query retrieves all connection properties that have been set in the connection string or set through a default value:

SELECT * FROM sys_connection_props WHERE Value <> ''

Columns


Name	Type	Description
Name	String	The name of the connection property.
ShortDescription	String	A brief description.
Type	String	The data type of the connection property.
Default	String	The default value if one is not explicitly set.
Values	String	A comma-separated list of possible values. A validation error is thrown if another value is specified.
Value	String	The value you set or a preconfigured default.
Required	Boolean	Whether the property is required to connect.
Category	String	The category of the connection property.
IsSessionProperty	String	Whether the property is a session property, used to save information about the current connection.
Sensitivity	String	The sensitivity level of the property. This informs whether the property is obfuscated in logging and authentication forms.
PropertyName	String	A camel-cased truncated form of the connection property name.
Ordinal	Int32	The index of the parameter.
CatOrdinal	Int32	The index of the parameter category.
Hierarchy	String	Shows dependent properties associated that need to be set alongside this one.
Visible	Boolean	Informs whether the property is visible in the connection UI.
ETC	String	Various miscellaneous information about the property.

sys_sqlinfo

Describes the SELECT query processing that the connector can offload to the data source.

See SQL Compliance for SQL syntax details.

Discovering the Data Source's SELECT Capabilities

Below is an example data set of SQL capabilities. Some aspects of SELECT functionality are returned in a comma-separated list if supported; otherwise, the column contains NO.


Name	Description	Possible Values
AGGREGATE_FUNCTIONS	Supported aggregation functions.	AVG, COUNT, MAX, MIN, SUM, DISTINCT
COUNT	Whether COUNT function is supported.	YES, NO
IDENTIFIER_QUOTE_OPEN_CHAR	The opening character used to escape an identifier.	[
IDENTIFIER_QUOTE_CLOSE_CHAR	The closing character used to escape an identifier.	]
SUPPORTED_OPERATORS	A list of supported SQL operators.	=, >, <, >=, <=, <>, !=, LIKE, NOT LIKE, IN, NOT IN, IS NULL, IS NOT NULL, AND, OR
GROUP_BY	Whether GROUP BY is supported, and, if so, the degree of support.	NO, NO_RELATION, EQUALS_SELECT, SQL_GB_COLLATE
OJ_CAPABILITIES	The supported varieties of outer joins supported.	NO, LEFT, RIGHT, FULL, INNER, NOT_ORDERED, ALL_COMPARISON_OPS
OUTER_JOINS	Whether outer joins are supported.	YES, NO
SUBQUERIES	Whether subqueries are supported, and, if so, the degree of support.	NO, COMPARISON, EXISTS, IN, CORRELATED_SUBQUERIES, QUANTIFIED
STRING_FUNCTIONS	Supported string functions.	LENGTH, CHAR, LOCATE, REPLACE, SUBSTRING, RTRIM, LTRIM, RIGHT, LEFT, UCASE, SPACE, SOUNDEX, LCASE, CONCAT, ASCII, REPEAT, OCTET, BIT, POSITION, INSERT, TRIM, UPPER, REGEXP, LOWER, DIFFERENCE, CHARACTER, SUBSTR, STR, REVERSE, PLAN, UUIDTOSTR, TRANSLATE, TRAILING, TO, STUFF, STRTOUUID, STRING, SPLIT, SORTKEY, SIMILAR, REPLICATE, PATINDEX, LPAD, LEN, LEADING, KEY, INSTR, INSERTSTR, HTML, GRAPHICAL, CONVERT, COLLATION, CHARINDEX, BYTE
NUMERIC_FUNCTIONS	Supported numeric functions.	ABS, ACOS, ASIN, ATAN, ATAN2, CEILING, COS, COT, EXP, FLOOR, LOG, MOD, SIGN, SIN, SQRT, TAN, PI, RAND, DEGREES, LOG10, POWER, RADIANS, ROUND, TRUNCATE
TIMEDATE_FUNCTIONS	Supported date/time functions.	NOW, CURDATE, DAYOFMONTH, DAYOFWEEK, DAYOFYEAR, MONTH, QUARTER, WEEK, YEAR, CURTIME, HOUR, MINUTE, SECOND, TIMESTAMPADD, TIMESTAMPDIFF, DAYNAME, MONTHNAME, CURRENT_DATE, CURRENT_TIME, CURRENT_TIMESTAMP, EXTRACT
REPLICATION_SKIP_TABLES	Indicates tables skipped during replication.
REPLICATION_TIMECHECK_COLUMNS	A string array containing a list of columns which will be used to check for (in the given order) to use as a modified column during replication.
IDENTIFIER_PATTERN	String value indicating what string is valid for an identifier.
SUPPORT_TRANSACTION	Indicates if the provider supports transactions such as commit and rollback.	YES, NO
DIALECT	Indicates the SQL dialect to use.
KEY_PROPERTIES	Indicates the properties which identify the uniform database.
SUPPORTS_MULTIPLE_SCHEMAS	Indicates if multiple schemas may exist for the provider.	YES, NO
SUPPORTS_MULTIPLE_CATALOGS	Indicates if multiple catalogs may exist for the provider.	YES, NO
DATASYNCVERSION	The CData Data Sync version needed to access this driver.	Standard, Starter, Professional, Enterprise
DATASYNCCATEGORY	The CData Data Sync category of this driver.	Source, Destination, Cloud Destination
SUPPORTSENHANCEDSQL	Whether enhanced SQL functionality beyond what is offered by the API is supported.	TRUE, FALSE
SUPPORTS_BATCH_OPERATIONS	Whether batch operations are supported.	YES, NO
SQL_CAP	All supported SQL capabilities for this driver.	SELECT, INSERT, DELETE, UPDATE, TRANSACTIONS, ORDERBY, OAUTH, ASSIGNEDID, LIMIT, LIKE, BULKINSERT, COUNT, BULKDELETE, BULKUPDATE, GROUPBY, HAVING, AGGS, OFFSET, REPLICATE, COUNTDISTINCT, JOINS, DROP, CREATE, DISTINCT, INNERJOINS, SUBQUERIES, ALTER, MULTIPLESCHEMAS, GROUPBYNORELATION, OUTERJOINS, UNIONALL, UNION, UPSERT, GETDELETED, CROSSJOINS, GROUPBYCOLLATE, MULTIPLECATS, FULLOUTERJOIN, MERGE, JSONEXTRACT, BULKUPSERT, SUM, SUBQUERIESFULL, MIN, MAX, JOINSFULL, XMLEXTRACT, AVG, MULTISTATEMENTS, FOREIGNKEYS, CASE, LEFTJOINS, COMMAJOINS, WITH, LITERALS, RENAME, NESTEDTABLES, EXECUTE, BATCH, BASIC, INDEX
PREFERRED_CACHE_OPTIONS	A string value specifies the preferred cacheOptions.
ENABLE_EF_ADVANCED_QUERY	Indicates if the driver directly supports advanced queries coming from Entity Framework. If not, queries will be handled client side.	YES, NO
PSEUDO_COLUMNS	A string array indicating the available pseudo columns.
MERGE_ALWAYS	If the value is true, The Merge Mode is forcibly executed in Data Sync.	TRUE, FALSE
REPLICATION_MIN_DATE_QUERY	A select query to return the replicate start datetime.
REPLICATION_MIN_FUNCTION	Allows a provider to specify the formula name to use for executing a server side min.
REPLICATION_START_DATE	Allows a provider to specify a replicate startdate.
REPLICATION_MAX_DATE_QUERY	A select query to return the replicate end datetime.
REPLICATION_MAX_FUNCTION	Allows a provider to specify the formula name to use for executing a server side max.
IGNORE_INTERVALS_ON_INITIAL_REPLICATE	A list of tables which will skip dividing the replicate into chunks on the initial replicate.
CHECKCACHE_USE_PARENTID	Indicates whether the CheckCache statement should be done against the parent key column.	TRUE, FALSE
CREATE_SCHEMA_PROCEDURES	Indicates stored procedures that can be used for generating schema files.

The following query retrieves the operators that can be used in the WHERE clause:

SELECT * FROM sys_sqlinfo WHERE Name = 'SUPPORTED_OPERATORS'

Note that individual tables may have different limitations or requirements on the WHERE clause; refer to the Data Model section for more information.

Columns


Name	Type	Description
NAME	String	A component of SQL syntax, or a capability that can be processed on the server.
VALUE	String	Detail on the supported SQL or SQL syntax.

sys_identity

Returns information about attempted modifications.

The following query retrieves the Ids of the modified rows in a batch operation:

         SELECT * FROM sys_identity

Columns


Name	Type	Description
Id	String	The database-generated Id returned from a data modification operation.
Batch	String	An identifier for the batch. 1 for a single operation.
Operation	String	The result of the operation in the batch: INSERTED, UPDATED, or DELETED.
Message	String	SUCCESS or an error message if the update in the batch failed.

sys_information

Describes the available system information.

The following query retrieves all columns:

SELECT * FROM sys_information

Columns


Name	Type	Description
Product	String	The name of the product.
Version	String	The version number of the product.
Datasource	String	The name of the datasource the product connects to.
NodeId	String	The unique identifier of the machine where the product is installed.
HelpURL	String	The URL to the product's help documentation.
License	String	The license information for the product. (If this information is not available, the field may be left blank or marked as 'N/A'.)
Location	String	The file path location where the product's library is stored.
Environment	String	The version of the environment or rumtine the product is currently running under.
DataSyncVersion	String	The tier of CData Sync required to use this connector.
DataSyncCategory	String	The category of CData Sync functionality (e.g., Source, Destination).

Connection String Options

The connection string properties are the various options that can be used to establish a connection. This section provides a complete list of the options you can configure in the connection string for this provider. Click the links for further details.

For more information on establishing a connection, see Establishing a Connection.

Authentication

Property	Description
URL	The URL of the Tally instance. Default value is http://{hostname or server ip}:9000.
Company	The Name of the Company in Tally.

SSL

Property	Description
SSLServerCert	Specifies the certificate to be accepted from the server when connecting using TLS/SSL.

Firewall

Property	Description
FirewallType	Specifies the protocol the provider uses to tunnel traffic through a proxy-based firewall.
FirewallServer	Identifies the IP address, DNS name, or host name of a proxy used to traverse a firewall and relay user queries to network resources.
FirewallPort	Specifies the TCP port to be used for a proxy-based firewall.
FirewallUser	Identifies the user ID of the account authenticating to a proxy-based firewall.
FirewallPassword	Specifies the password of the user account authenticating to a proxy-based firewall.

Proxy

Property	Description
ProxyAutoDetect	Specifies whether the provider checks your system proxy settings for existing proxy server configurations, rather than using a manually specified proxy server.
ProxyServer	Identifies the hostname or IP address of the proxy server through which you want to route HTTP traffic.
ProxyPort	Identifies the TCP port on your specified proxy server that has been reserved for routing HTTP traffic to and from the client.
ProxyAuthScheme	Specifies the authentication method the provider uses when authenticating to the proxy server specified in the ProxyServer connection property.
ProxyUser	Provides the username of a user account registered with the proxy server specified in the ProxyServer connection property.
ProxyPassword	Specifies the password of the user specified in the ProxyUser connection property.
ProxySSLType	Specifies the SSL type to use when connecting to the proxy server specified in the ProxyServer connection property.
ProxyExceptions	Specifies a semicolon-separated list of destination hostnames or IPs that are exempt from connecting through the proxy server set in the ProxyServer connection property.

Logging

Property	Description
Logfile	Specifies the file path to the log file where the provider records its activities, such as authentication, query execution, and connection details.
Verbosity	Specifies the verbosity level of the log file, which controls the amount of detail logged. Supported values range from 1 to 5.
LogModules	Specifies the core modules to include in the log file. Use a semicolon-separated list of module names. By default, all modules are logged.
MaxLogFileSize	Specifies the maximum size of a single log file in bytes. For example, '10 MB'. When the file reaches the limit, the provider creates a new log file with the date and time appended to the name.
MaxLogFileCount	Specifies the maximum number of log files the provider retains. When the limit is reached, the oldest log file is deleted to make space for a new one.

Schema

Property	Description
Location	Specifies the location of a directory containing schema files that define tables, views, and stored procedures. Depending on your service's requirements, this may be expressed as either an absolute path or a relative path.
BrowsableSchemas	Optional setting that restricts the schemas reported to a subset of all available schemas. For example, BrowsableSchemas=SchemaA,SchemaB,SchemaC .
Tables	Optional setting that restricts the tables reported to a subset of all available tables. For example, Tables=TableA,TableB,TableC .
Views	Optional setting that restricts the views reported to a subset of the available tables. For example, Views=ViewA,ViewB,ViewC .

Caching

Property	Description
AutoCache	Specifies whether the content of tables targeted by SELECT queries is automatically cached to the specified cache database.
CacheProvider	The namespace of an ADO.NET provider. The specified provider is used as the target database for all caching operations.
CacheDriver	The driver class of a JDBC driver. The specified driver is used to connect to the target database for all caching operations.
CacheConnection	Specifies the connection string for the specified cache database.
CacheLocation	Specifies the path to the cache when caching to a file.
CacheTolerance	Notes the tolerance, in seconds, for stale data in the specified cache database. Requires AutoCache to be set to True.
Offline	Gets the data from the specified cache database instead of live Tally data.
CacheMetadata	Determines whether the provider caches table metadata to a file-based cache database.

Miscellaneous

Property	Description
MaxRows	Specifies the maximum number of rows returned for queries that do not include either aggregation or GROUP BY.
Other	Specifies advanced connection properties for specialized scenarios. Use this property only under the guidance of our Support team to address specific issues.
PseudoColumns	Specifies the pseudocolumns to expose as table columns, expressed as a string in the format 'TableName=ColumnName;TableName=ColumnName'.
RTK	Specifies the runtime key for licensing the provider. If unset or invalid, the provider defaults to the standard licensing method. This property is only required in environments where the standard licensing method is unsupported or requires a runtime key.
Timeout	Specifies the maximum time, in seconds, that the provider waits for a server response before throwing a timeout error.
UserDefinedViews	Specifies a filepath to a JSON configuration file that defines custom views. The provider automatically detects and uses the views specified in this file.

Authentication

This section provides a complete list of the Authentication properties you can configure in the connection string for this provider.

Property	Description
URL	The URL of the Tally instance. Default value is http://{hostname or server ip}:9000.
Company	The Name of the Company in Tally.

URL

The URL of the Tally instance. Default value is http://{hostname or server ip}:9000.

Data Type

string

Default Value

""

Remarks

The URL of the Tally instance. Default value is http://{hostname or server ip}:9000

Company

The Name of the Company in Tally.

Data Type

string

Default Value

""

Remarks

Enter the Name of the Company if you want to fetch data of the Company which is not selected in the tool at the moment. Please make sure that Company is selected and unlocked atleast once in the Tally tool after the tool is launched. It need not be in the selected state at the moment. Default value is blank. In case of blank it will fetch data of the Company that is selected in the Tally Tool.

SSL

This section provides a complete list of the SSL properties you can configure in the connection string for this provider.

Property	Description
SSLServerCert	Specifies the certificate to be accepted from the server when connecting using TLS/SSL.

SSLServerCert

Specifies the certificate to be accepted from the server when connecting using TLS/SSL.

Data Type

string

Default Value

""

Remarks

If you are using a TLS/SSL connection, use this property to specify the TLS/SSL certificate to be accepted from the server. If you specify a value for this property, all other certificates that are not trusted by the machine are rejected.

This property can take the following forms:


Description	Example
A full PEM Certificate (example shortened for brevity)	`-----BEGIN CERTIFICATE----- MIIChTCCAe4CAQAwDQYJKoZIhv......Qw== -----END CERTIFICATE-----`
A path to a local file containing the certificate	C:\cert.cer
The public key (example shortened for brevity)	`-----BEGIN RSA PUBLIC KEY----- MIGfMA0GCSq......AQAB -----END RSA PUBLIC KEY-----`
The MD5 Thumbprint (hex values can also be either space- or colon-separated)	`ecadbdda5a1529c58a1e9e09828d70e4`
The SHA1 Thumbprint (hex values can also be either space- or colon-separated)	`34a929226ae0819f2ec14b4a3d904f801cbb150d`

Note: It is possible to use '*' to signify that all certificates should be accepted, but due to security concerns this is not recommended.

Firewall

This section provides a complete list of the Firewall properties you can configure in the connection string for this provider.

Property	Description
FirewallType	Specifies the protocol the provider uses to tunnel traffic through a proxy-based firewall.
FirewallServer	Identifies the IP address, DNS name, or host name of a proxy used to traverse a firewall and relay user queries to network resources.
FirewallPort	Specifies the TCP port to be used for a proxy-based firewall.
FirewallUser	Identifies the user ID of the account authenticating to a proxy-based firewall.
FirewallPassword	Specifies the password of the user account authenticating to a proxy-based firewall.

FirewallType

Specifies the protocol the provider uses to tunnel traffic through a proxy-based firewall.

Possible Values

NONE, TUNNEL, SOCKS4, SOCKS5

Data Type

string

Default Value

"NONE"

Remarks

A proxy-based firewall (or proxy firewall) is a network security device that acts as an intermediary between user requests and the resources they access. The proxy accepts the request of an authenticated user, tunnels through the firewall, and transmits the request to the appropriate server.

Because the proxy evaluates and transfers data backets on behalf of the requesting users, the users never connect directly with the servers, only with the proxy.

Note: By default, the connector connects to the system proxy. To disable this behavior and connect to one of the following proxy types, set ProxyAutoDetect to false.

The following table provides port number information for each of the supported protocols.


Protocol	Default Port	Description
TUNNEL	80	The port where the connector opens a connection to Tally. Traffic flows back and forth via the proxy at this location.
SOCKS4	1080	The port where the connector opens a connection to Tally. SOCKS 4 then passes theFirewallUser value to the proxy, which determines whether the connection request should be granted.
SOCKS5	1080	The port where the connector sends data to Tally. If the SOCKS 5 proxy requires authentication, set FirewallUser and FirewallPassword to credentials the proxy recognizes.

To connect to HTTP proxies, use ProxyServer and ProxyPort. To authenticate to HTTP proxies, use ProxyAuthScheme, ProxyUser, and ProxyPassword.

FirewallServer

Identifies the IP address, DNS name, or host name of a proxy used to traverse a firewall and relay user queries to network resources.

Data Type

string

Default Value

""

Remarks

A proxy-based firewall (or proxy firewall) is a network security device that acts as an intermediary between user requests and the resources they access. The proxy accepts the request of an authenticated user, tunnels through the firewall, and transmits the request to the appropriate server.

Because the proxy evaluates and transfers data backets on behalf of the requesting users, the users never connect directly with the servers, only with the proxy.

FirewallPort

Specifies the TCP port to be used for a proxy-based firewall.

Data Type

int

Default Value

0

Remarks

A proxy-based firewall (or proxy firewall) is a network security device that acts as an intermediary between user requests and the resources they access. The proxy accepts the request of an authenticated user, tunnels through the firewall, and transmits the request to the appropriate server.

Because the proxy evaluates and transfers data backets on behalf of the requesting users, the users never connect directly with the servers, only with the proxy.

FirewallUser

Identifies the user ID of the account authenticating to a proxy-based firewall.

Data Type

string

Default Value

""

Remarks

A proxy-based firewall (or proxy firewall) is a network security device that acts as an intermediary between user requests and the resources they access. The proxy accepts the request of an authenticated user, tunnels through the firewall, and transmits the request to the appropriate server.

Because the proxy evaluates and transfers data backets on behalf of the requesting users, the users never connect directly with the servers, only with the proxy.

FirewallPassword

Specifies the password of the user account authenticating to a proxy-based firewall.

Data Type

string

Default Value

""

Remarks

A proxy-based firewall (or proxy firewall) is a network security device that acts as an intermediary between user requests and the resources they access. The proxy accepts the request of an authenticated user, tunnels through the firewall, and transmits the request to the appropriate server.

Because the proxy evaluates and transfers data backets on behalf of the requesting users, the users never connect directly with the servers, only with the proxy.

Proxy

This section provides a complete list of the Proxy properties you can configure in the connection string for this provider.

Property	Description
ProxyAutoDetect	Specifies whether the provider checks your system proxy settings for existing proxy server configurations, rather than using a manually specified proxy server.
ProxyServer	Identifies the hostname or IP address of the proxy server through which you want to route HTTP traffic.
ProxyPort	Identifies the TCP port on your specified proxy server that has been reserved for routing HTTP traffic to and from the client.
ProxyAuthScheme	Specifies the authentication method the provider uses when authenticating to the proxy server specified in the ProxyServer connection property.
ProxyUser	Provides the username of a user account registered with the proxy server specified in the ProxyServer connection property.
ProxyPassword	Specifies the password of the user specified in the ProxyUser connection property.
ProxySSLType	Specifies the SSL type to use when connecting to the proxy server specified in the ProxyServer connection property.
ProxyExceptions	Specifies a semicolon-separated list of destination hostnames or IPs that are exempt from connecting through the proxy server set in the ProxyServer connection property.

ProxyAutoDetect

Specifies whether the provider checks your system proxy settings for existing proxy server configurations, rather than using a manually specified proxy server.

Data Type

bool

Default Value

true

Remarks

When this connection property is set to True, the connector checks your system proxy settings for existing proxy server configurations (no need to manually supply proxy server details).

This connection property takes precedence over other proxy settings. If you want to configure the connector to connect to a specific proxy server, set ProxyAutoDetect to False.

On Windows, the connector reads the proxy settings from the Internet Options in the registry, specifically the registry key HKCU\SOFTWARE\Microsoft\Windows\CurrentVersion\Internet Settings\. On Windows 10 and later, this corresponds to the Proxy Settings found in the Windows Settings.

Note that these settings apply only to the current user of the machine. If you're running an application as a service, the connector does not read your own user's settings. You must instead manually supply the proxy settings in the connector's connection properties.

On Mac, the connector reads proxy settings from the system-configured CFNetwork settings.

On Linux, this property is unsupported, and is set to False by default.

To connect to an HTTP proxy, see ProxyServer. For other proxies, such as SOCKS or tunneling, see FirewallType.

ProxyServer

Identifies the hostname or IP address of the proxy server through which you want to route HTTP traffic.

Data Type

string

Default Value

""

Remarks

The connector only routes HTTP traffic through the proxy server specified in this connection property when ProxyAutoDetect is set to False.

If ProxyAutoDetect is set to True (the default), the connector instead routes HTTP traffic through the proxy server specified in your system proxy settings.

ProxyPort

Identifies the TCP port on your specified proxy server that has been reserved for routing HTTP traffic to and from the client.

Data Type

int

Default Value

80

Remarks

The connector only routes HTTP traffic through the ProxyServer port specified in this connection property when ProxyAutoDetect is set to False.

If ProxyAutoDetect is set to True (the default), the connector instead routes HTTP traffic through the proxy server port specified in your system proxy settings.

For other proxy types, see FirewallType.

ProxyAuthScheme

Specifies the authentication method the provider uses when authenticating to the proxy server specified in the ProxyServer connection property.

Possible Values

BASIC, DIGEST, NONE, NEGOTIATE, NTLM

Data Type

string

Default Value

"BASIC"

Remarks

Note: The connector only uses this ProxyAuthScheme when ProxyAutoDetect is set to False. If ProxyAutoDetect is set to True (the default), the connector instead uses the authentication method specified in your system proxy settings.

Supported authentication types :

BASIC: The connector performs HTTP basic authentication.
DIGEST: The connector performs HTTP digest authentication.
NTLM: The connector retrieves an NTLM token.
NEGOTIATE: The connector retrieves an NTLM or Kerberos token based on the applicable protocol for authentication.
NONE: Signifies that the ProxyServer does not require authentication.

For all values other than NONE, you must also set the ProxyUser and ProxyPassword connection properties.

If you need to use another authentication type, such as SOCKS 5 authentication, see FirewallType.

ProxyUser

Provides the username of a user account registered with the proxy server specified in the ProxyServer connection property.

Data Type

string

Default Value

""

Remarks

The ProxyUser and ProxyPassword connection properties are used to connect and authenticate against the HTTP proxy specified in ProxyServer.

After selecting one of the available authentication types in ProxyAuthScheme, set this property as follows:


ProxyAuthScheme Value	Value to set for ProxyUser
BASIC	The username of a user registered with the proxy server.
DIGEST	The username of a user registered with the proxy server.
NEGOTIATE	The username of a Windows user who is a valid user in the domain or trusted domain that the proxy server is part of, in the format `user@domain` or `domain\user`.
NTLM	The username of a Windows user who is a valid user in the domain or trusted domain that the proxy server is part of, in the format `user@domain` or `domain\user`.
NONE	Do not set the ProxyPassword connection property.

Note: The connector only uses this username if ProxyAutoDetect is set to False. If ProxyAutoDetect is set to True (the default), the connector instead uses the username specified in your system proxy settings.

ProxyPassword

Specifies the password of the user specified in the ProxyUser connection property.

Data Type

string

Default Value

""

Remarks

The ProxyUser and ProxyPassword connection properties are used to connect and authenticate against the HTTP proxy specified in ProxyServer.

After selecting one of the available authentication types in ProxyAuthScheme, set this property as follows:


ProxyAuthScheme Value	Value to set for ProxyPassword
BASIC	The password associated with the proxy server user specified in ProxyUser.
DIGEST	The password associated with the proxy server user specified in ProxyUser.
NEGOTIATE	The password associated with the Windows user account specified in ProxyUser.
NTLM	The password associated with the Windows user account specified in ProxyUser.
NONE	Do not set the ProxyPassword connection property.

For SOCKS 5 authentication or tunneling, see FirewallType.

Note: The connector only uses this password if ProxyAutoDetect is set to False. If ProxyAutoDetect is set to True (the default), the connector instead uses the password specified in your system proxy settings.

ProxySSLType

Specifies the SSL type to use when connecting to the proxy server specified in the ProxyServer connection property.

Possible Values

AUTO, ALWAYS, NEVER, TUNNEL

Data Type

string

Default Value

"AUTO"

Remarks

This property determines when to use SSL for the connection to the HTTP proxy specified by ProxyServer. You can set this connection property to the following values :


AUTO	Default setting. If ProxyServer is set to an HTTPS URL, the connector uses the TUNNEL option. If ProxyServer is set to an HTTP URL, the component uses the NEVER option.
ALWAYS	The connection is always SSL enabled.
NEVER	The connection is not SSL enabled.
TUNNEL	The connection is made through a tunneling proxy. The proxy server opens a connection to the remote host and traffic flows back and forth through the proxy.

ProxyExceptions

Specifies a semicolon-separated list of destination hostnames or IPs that are exempt from connecting through the proxy server set in the ProxyServer connection property.

Data Type

string

Default Value

""

Remarks

The ProxyServer is used for all addresses, except for addresses defined in this property. Use semicolons to separate entries.

Note: The connector uses the system proxy settings by default, without further configuration needed. If you want to explicitly configure proxy exceptions for this connection, set ProxyAutoDetect to False.

Logging

This section provides a complete list of the Logging properties you can configure in the connection string for this provider.

Property	Description
Logfile	Specifies the file path to the log file where the provider records its activities, such as authentication, query execution, and connection details.
Verbosity	Specifies the verbosity level of the log file, which controls the amount of detail logged. Supported values range from 1 to 5.
LogModules	Specifies the core modules to include in the log file. Use a semicolon-separated list of module names. By default, all modules are logged.
MaxLogFileSize	Specifies the maximum size of a single log file in bytes. For example, '10 MB'. When the file reaches the limit, the provider creates a new log file with the date and time appended to the name.
MaxLogFileCount	Specifies the maximum number of log files the provider retains. When the limit is reached, the oldest log file is deleted to make space for a new one.

Logfile

Specifies the file path to the log file where the provider records its activities, such as authentication, query execution, and connection details.

Data Type

string

Default Value

""

Remarks

This property specifies the location and name of the log file where the connector records its operations, including authentication events, query execution, and connection details. If the specified file does not exist, the connector creates it. Ensure that the user or the service running the connector has write access to the specified path or file. Without sufficient permissions, the log file is not created.

Sensitive information from the connection string, such as passwords and tokens, is automatically masked in the logs. However, sensitive information present in the data itself may not be masked.

If you specify a relative path for Logfile, and if the Location property is set, that directory is used as the base path for the log file.

Additional properties allow you to customize logging behavior:

Use Verbosity to control the level of detail of the log file.
Manage log file size with MaxLogFileSize and control the number of retained log files with MaxLogFileCount.
Filter specific log modules by adjusting the LogModules property.

Verbosity

Specifies the verbosity level of the log file, which controls the amount of detail logged. Supported values range from 1 to 5.

Data Type

string

Default Value

"1"

Remarks

This property defines the level of detail the connector includes in the log file. Higher verbosity levels increase the detail of the logged information, but may also result in larger log files and slower performance due to the additional data being captured.

The default verbosity level is 1, which is recommended for regular operation. Higher verbosity levels are primarily intended for debugging purposes. For more information on each level, refer to Logging.

When combined with the LogModules property, Verbosity can refine logging to specific categories of information.

LogModules

Specifies the core modules to include in the log file. Use a semicolon-separated list of module names. By default, all modules are logged.

Data Type

string

Default Value

""

Remarks

The connector writes details about each operation it performs into the logfile specified by the Logfile connection property.

Each of these logged operations are assigned to a themed category called a module, and each module has a corresponding short code used to labels individual connector operations as belonging to that module.

When this connection property is set to a semicolon-separated list of module codes, only operations belonging to the specified modules are written to the logfile. Note that this only affects which operations are logged moving forward and doesn't retroactively alter the existing contents of the logfile. For example: INFO;EXEC;SSL;META;

By default, logged operations from all modules are included.

You can explicitly exclude a module by prefixing it with a "-". For example: -HTTP

To apply filters to submodules, identify them with the syntax <module name>.<submodule name>. For example, the following value causes the connector to only log actions belonging to the HTTP module, and further refines it to exclude actions belonging to the Res submodule of the HTTP module: HTTP;-HTTP.Res

Note that the logfile filtering triggered by the Verbosity connection property takes precedence over the filtering imposed by this connection property. This means that operations of a higher verbosity level than the level specified in the Verbosity connection property are not printed in the logfile, even if they belong to one of the modules specified in this connection property.

The available modules and submodules are:


Module Name	Module Description	Submodules
INFO	General Information. Includes the connection string, product version (build number), and initial connection messages.	Connec – Information related to creating or destroying connections. Messag – Generic label for messages pertaining to connections, the connection string, and product version. These messages are typically specific to the connector, rather than being received and passed along directly from the service.
EXEC	Query Execution. Includes execution messages for user-written SQL queries, parsed SQL queries, and normalized SQL queries. Success/failure messages for queries and query pages appear here as well.	Messag – Messages pertaining to query execution. These messages are typically specific to the connector, rather than being received and passed along directly from the service. Normlz – Query normalization steps. Query normalization is when the product takes the user-submitted query and rewrites the query to get the same results with optimal performance. Origin – This label applies to any messages recording a user's original query (the exact, unaltered, non-normalized query executed by the user). Page – Messages related to query paging. Parsed – Query parsing steps. Parsing is the process of converting the user-submitted query into a standardized format for easier processing.
HTTP	HTTP protocol messages. Includes HTTP requests/responses (including POST messages), as well as Kerberos related messages.	KERB – HTTP requests related to Kerberos. Messag – Messages pertaining to HTTP protocols. These messages are typically specific to the connector, rather than being received and passed along directly from the service. Unpack – This label applies to messages about zipped data being returned from the service API and unpacked by the product. Res – Messages containing HTTP responses. Req – Messages containing HTTP requests.
WSDL	Messages pertaining to the generation of WSDL/XSD files.	—
SSL	SSL certificate messages.	Certif – Messages pertaining to SSL certificates.
AUTH	Authentication related failure/success messages.	Messag – Messages pertaining to authentication. These messages are typically specific to the connector, rather than being received and passed along directly from the service. OAuth – Messages related to OAuth authentication. Krbros – Kerberos-related authentication messages.
SQL	Includes SQL transactions, SQL bulk transfer messages, and SQL result set messages.	Bulk – Messages pertaining to bulk query execution. Cache – Messages related to reading row data from and writing row data to the product's cache for better performance. Messag – Messages pertaining to SQL transactions. These messages are typically specific to the connector, rather than being received and passed along directly from the service. ResSet – Query resultsets. Transc – Messages related to handling transactions, including information about the number of jobs executed and backup table handling.
META	Metadata cache and schema messages.	Cache – Messages related to reading from and modifying column and table definitions in the product's cache for better performance. Schema – Messages related to retrieving metadata from or modifying the service schema. MemSto – Messages related to writing to or reading from in-memory metadata cache. Storag – Messages relating to storing metadata on disk or in an external data store, rather than in memory.
FUNC	Information related to executing SQL functions.	Errmsg – Error messages related to executing SQL functions.
TCP	Incoming and outgoing raw bytes on TCP transport layer messages.	Send – Raw data sent via the TCP protocol. Receiv – Raw data received via the TCP protocol.
FTP	Messages pertaining to the File Transfer Protocol.	Info – Status messages related to communication in the FTP protocol. Client – Messages related to actions taken by the FTP client (the product) during FTP communication. Server – Messages related to actions taken by the FTP server during FTP communication.
SFTP	Messages pertaining to the Secure File Transfer Protocol.	Info – Status messages related to communication in the SFTP protocol. To_Server – Messages related to actions taken by the SFTP client (the product) during SFTP communication. From_Server – Messages related to actions taken by the SFTP server during SFTP communication.
POP	Messages pertaining to data transferred via the Post Office Protocol.	Client – Messages related to actions taken by the POP client (the product) during POP communication. Server – Messages related to actions taken by the POP server during POP communication. Status – Status messages related to communication in the POP protocol.
SMTP	Messages pertaining to data transferred via the Simple Mail Transfer Protocol.	Client – Messages related to actions taken by the SMTP client (the product) during SMTP communication. Server – Messages related to actions taken by the SMTP server during SMTP communication. Status – Status messages related to communication in the SMTP protocol.
CORE	Messages relating to various internal product operations not covered by other modules.	—
DEMN	Messages related to SQL remoting.	—
CLJB	Messages about bulk data uploads (cloud job).	Commit – Submissions for bulk data uploads.
SRCE	Miscellaneous messages produced by the product that don't belong in any other module.	—
TRANCE	Advanced messages concerning low-level product operations.	—

MaxLogFileSize

Specifies the maximum size of a single log file in bytes. For example, '10 MB'. When the file reaches the limit, the provider creates a new log file with the date and time appended to the name.

Data Type

string

Default Value

"100MB"

Remarks

For values lower than 100 KB, the connector uses 100 KB as the minimum allowable size.

To control the total number of log files retained, use the MaxLogFileCount property in conjunction with this property. Together, these properties allow you to manage the size and retention of log files effectively.

MaxLogFileCount

Specifies the maximum number of log files the provider retains. When the limit is reached, the oldest log file is deleted to make space for a new one.

Data Type

int

Default Value

-1

Remarks

Each log file name includes the date and time for easier identification.

This property accepts the following values:

A value of 2 or higher sets the maximum number of log files retained.
A value of 1 retains only one log file. When it reaches the maximum size, the file is deleted and replaced by a new one, leaving no history beyond the current log.
A value of 0 or negative indicates no limit on the number of log files, and logging continues indefinitely.

To manage log file size, use the MaxLogFileSize property. The two properties work together to control the size and retention of log files in the logging folder.

Schema

This section provides a complete list of the Schema properties you can configure in the connection string for this provider.

Property	Description
Location	Specifies the location of a directory containing schema files that define tables, views, and stored procedures. Depending on your service's requirements, this may be expressed as either an absolute path or a relative path.
BrowsableSchemas	Optional setting that restricts the schemas reported to a subset of all available schemas. For example, BrowsableSchemas=SchemaA,SchemaB,SchemaC .
Tables	Optional setting that restricts the tables reported to a subset of all available tables. For example, Tables=TableA,TableB,TableC .
Views	Optional setting that restricts the views reported to a subset of the available tables. For example, Views=ViewA,ViewB,ViewC .

Location

Specifies the location of a directory containing schema files that define tables, views, and stored procedures. Depending on your service's requirements, this may be expressed as either an absolute path or a relative path.

Data Type

string

Default Value

"%APPDATA%\\CData\\Tally Data Provider\\Schema"

Remarks

The Location property is only needed if you want to either customize definitions (for example, change a column name, ignore a column, etc.) or extend the data model with new tables, views, or stored procedures.

If left unspecified, the default location is %APPDATA%\\CData\\Tally Data Provider\\Schema, where %APPDATA% is set to the user's configuration directory:


Platform	%APPDATA%
Windows	The value of the APPDATA environment variable
Linux	~/.config

BrowsableSchemas

Optional setting that restricts the schemas reported to a subset of all available schemas. For example, BrowsableSchemas=SchemaA,SchemaB,SchemaC .

Data Type

string

Default Value

""

Remarks

Listing all available database schemas can take extra time, thus degrading performance. Providing a list of schemas in the connection string saves time and improves performance.

Tables

Optional setting that restricts the tables reported to a subset of all available tables. For example, Tables=TableA,TableB,TableC .

Data Type

string

Default Value

""

Remarks

Listing all available tables from some databases can take extra time, thus degrading performance. Providing a list of tables in the connection string saves time and improves performance.

If there are lots of tables available and you already know which ones you want to work with, you can use this property to restrict your viewing to only those tables. To do this, specify the tables you want in a comma-separated list. Each table should be a valid SQL identifier with any special characters escaped using square brackets, double-quotes or backticks. For example, Tables=TableA,[TableB/WithSlash],WithCatalog.WithSchema.`TableC With Space`.

Note: If you are connecting to a data source with multiple schemas or catalogs, you must specify each table you want to view by its fully qualified name. This avoids ambiguity between tables that may exist in multiple catalogs or schemas.

Views

Optional setting that restricts the views reported to a subset of the available tables. For example, Views=ViewA,ViewB,ViewC .

Data Type

string

Default Value

""

Remarks

Listing all available views from some databases can take extra time, thus degrading performance. Providing a list of views in the connection string saves time and improves performance.

If there are lots of views available and you already know which ones you want to work with, you can use this property to restrict your viewing to only those views. To do this, specify the views you want in a comma-separated list. Each view should be a valid SQL identifier with any special characters escaped using square brackets, double-quotes or backticks. For example, Views=ViewA,[ViewB/WithSlash],WithCatalog.WithSchema.`ViewC With Space`.

Note: If you are connecting to a data source with multiple schemas or catalogs, you must specify each view you want to examine by its fully qualified name. This avoids ambiguity between views that may exist in multiple catalogs or schemas.

Caching

This section provides a complete list of the Caching properties you can configure in the connection string for this provider.

Property	Description
AutoCache	Specifies whether the content of tables targeted by SELECT queries is automatically cached to the specified cache database.
CacheProvider	The namespace of an ADO.NET provider. The specified provider is used as the target database for all caching operations.
CacheDriver	The driver class of a JDBC driver. The specified driver is used to connect to the target database for all caching operations.
CacheConnection	Specifies the connection string for the specified cache database.
CacheLocation	Specifies the path to the cache when caching to a file.
CacheTolerance	Notes the tolerance, in seconds, for stale data in the specified cache database. Requires AutoCache to be set to True.
Offline	Gets the data from the specified cache database instead of live Tally data.
CacheMetadata	Determines whether the provider caches table metadata to a file-based cache database.

AutoCache

Specifies whether the content of tables targeted by SELECT queries is automatically cached to the specified cache database.

Data Type

bool

Default Value

false

Remarks

When this connection property is set to True, the connector automatically caches the contents of tables targeted by SELECT queries. The content of these tables is cached to the cache database specified by the CacheConnection and CacheProvider connection properties.

CacheProvider

The namespace of an ADO.NET provider. The specified provider is used as the target database for all caching operations.

Data Type

string

Default Value

""

Remarks

You can cache to ADO.NET providers saved in your ADO.NET global assembly cache (GAC).

CData ADO.NET providers automatically register themselves with the GAC during installation, so you don't need to do so manually.

Third-party ADO.NET providers may or may not automatically register themselves with the GAC during installation. If you want to cache to a third-party ADO.NET provider, consult the documentation for that provider to determine what steps (if any) you must take to register them with the GAC. Once they have been registered, you can supply their namespace in this connection property.

You must also set the CacheConnection connection property to provide a connection string for the specified ADO.NET provider.

The following sections show connection examples and address other requirements for several popular database providers. Refer to CacheConnection for more information on typical connection properties.

SQLite

You can use the Microsoft ADO.NET Provider for SQLite to cache to SQLite databases.

CacheProvider=Microsoft.Data.Sqlite;CacheConnection='DataSource=C:\\Users\\Public\\cache.db;'Url='http://localhost:9000'

MySQL

To cache to MySQL, you can use the CData ADO.NET Provider for MySQL:

Cache Provider=System.Data.CData.MySQL;Cache Connection='Server=localhost;Port=3306;Database=cache;User=root;Password=123456';User=myUser;Password=myPassword;Security Token=myToken;

SQL Server

You can use the Microsoft .NET Framework Provider for SQL Server, included in the .NET Framework, to cache to SQL Server:

Cache Provider=System.Data.SqlClient;Cache Connection="Server=MyMACHINE\MyInstance;Database=SQLCACHE;User Id=root;Password=admin";Url='http://localhost:9000'

Oracle

To cache to Oracle, you can use the Oracle Data Provider for .NET, as shown in the following example:

Cache Provider=Oracle.DataAccess.Client;Cache Connection='User Id=scott;Password=tiger;Data Source=ORCL';Url='http://localhost:9000'

The Oracle Data Provider for .NET also requires the Oracle Database Client. When you download the Oracle Database Client, ensure that its bitness matches the bitness of your machine. When you install, select either the Runtime or Administrator installation type. The Instant Client is not sufficient.

PostgreSQL

To cache to PostgreSQL, you can use the CData ADO.NET Provider for PostgreSQL:

Cache Provider=System.Data.CData.PostgreSQL;Cache Connection='Server=localhost;Port=5432;Database=cache;User=postgres;Password=123456';User=myUser;Password=myPassword;Security Token=myToken;

CacheDriver

The driver class of a JDBC driver. The specified driver is used to connect to the target database for all caching operations.

Data Type

string

Default Value

""

Remarks

You can cache to any database for which you have a JDBC driver, including CData JDBC drivers.

Note: You must add the JAR file of the specified JDBC driver to the classpath. For CData JDBC drivers, you can find this JAR file in the "lib" subfolder of that driver's installation directory.

You must also set the CacheConnection connection property to provide a connection string for the specified JDBC driver.

For Linux systems and macOS, you need to create a config.ini file on the installation path of the driver (site-packages/cdata). The config.ini file has the following format (the driver and the path of the JDBC driver):

[salesforce.cpython-38-x86_64-linux-gnu.so]
CLASSPATH = /home/usrname/Downloads/lib/cdata.jdbc.postgresql.jar

Examples

The following examples show how to cache to several major databases. For more information on the JDBC URL syntax and typical connection properties, see CacheConnection.

Derby and Java DB

Java DB is the Oracle distribution of Derby. You must add the Derby JDBC driver's JAR file, derbytools.jar, to your classpath to cache to Java DB.

The Derby JDBC driver's JAR file is bundled in db-derby-10.17.1.0-bin.zip, which you can download from this page. You can find derbytools.jar in the "lib" subfolder of this zip file.

After adding derbytools.jar to the classpath, you can cache to a Java DB database as follows:

jdbc:tally:CacheDriver=org.apache.derby.jdbc.EmbeddedDriver;CacheConnection='jdbc:derby:sample';Url='http://localhost:9000'

To cache to an in-memory database, use a JDBC URL like the following:

jdbc:tally:CacheDriver=org.apache.derby.jdbc.EmbeddedDriver;CacheConnection='jdbc:derby:memory';Url='http://localhost:9000'

SQLite

The following is a JDBC URL for the SQLite JDBC driver:

jdbc:tally:CacheDriver=org.sqlite.JDBC;CacheConnection='jdbc:sqlite:C:/Temp/sqlite.db';Url='http://localhost:9000'

MySQL

The following is a JDBC URL for the CData JDBC Driver for MySQL:

  jdbc:tally:Cache Driver=cdata.jdbc.mysql.MySQLDriver;Cache Connection='jdbc:mysql:Server=localhost;Port=3306;Database=cache;User=root;Password=123456';Url='http://localhost:9000'

SQL Server

The following JDBC URL uses the Microsoft JDBC Driver for SQL Server:

jdbc:tally:Cache Driver=com.microsoft.sqlserver.jdbc.SQLServerDriver;Cache Connection='jdbc:sqlserver://localhost\sqlexpress:7437;user=sa;password=123456;databaseName=Cache';Url='http://localhost:9000'

Oracle

The following is a JDBC URL for the Oracle Thin Client:

jdbc:tally:Cache Driver=oracle.jdbc.OracleDriver;CacheConnection='jdbc:oracle:thin:scott/tiger@localhost:1521:orcldb';Url='http://localhost:9000'

NOTE: If using a version of Oracle older than 9i, the cache driver will instead be oracle.jdbc.driver.OracleDriver .

PostgreSQL

The following JDBC URL uses the official PostgreSQL JDBC driver:

jdbc:tally:CacheDriver=cdata.jdbc.postgresql.PostgreSQLDriver;CacheConnection='jdbc:postgresql:User=postgres;Password=admin;Database=postgres;Server=localhost;Port=5432;';Url='http://localhost:9000'

CacheConnection

Specifies the connection string for the specified cache database.

Data Type

string

Default Value

""

Remarks

The target cache database is determined by a combination of this connection property and the CacheProvider connection property. Both properties are required to use the specified cache database.

The connection string specified in this connection property is passed directly to the specified in the CacheProvider connection property. Consult the documentation for the specified for more information on its available connection properties.

Examples of common cache database settings can be found below.

SQLite

MySQL

The following are typical connection properties:

Server: The IP address or domain name of the server hosting the MySQL database that you want to cache to.
Port: The port on the specified server where your MySQL instance is running.
Database: The name of the MySQL database that you want to cache to. Must match the name of a MySQL database hosted on the specified server.
User: The username of a user registered with the selected MySQL database.
Password: The password associated with the specified MySQL user.

SQL Server

The following are typical SQL Server connection properties:

Server: The name or network address of the computer running SQL Server. To connect to a named instance instead of the default instance, specify the host name and the instance name, separated by a backslash.
Port: The port on the specified server where your SQL Server instance is running.
Database: The name of the SQL Server database you want to cache to. Must match the name of a SQL Server database hosted on the specified server.
Integrated Security: To use the current Windows account for authentication, set this option to True. To authenticate with User and Password instead, set this option to False.
User Id: The username of a user registered with the selected SQL Server database. This property is only needed if you are not using integrated security.
Password: The password associated with the specified SQL Server user. This property is only needed if you are not using integrated security.

Oracle

The following are typical connection properties:

Data Source: The connect descriptor that identifies the Oracle database. This can be a TNS connect descriptor, an Oracle Net Services name that resolves to a connect descriptor, or, after version 11g, an Easy Connect naming (the host name of the Oracle server with an optional port and service name).
User Id: The username of a user registered with the selected Oracle database.
Password: The password associated with the specified Oracle user.

PostgreSQL

The following are typical connection properties:

Host: The address of the server hosting the PostgreSQL database.
Port: The port on the specified host server where your PostgreSQL database is hosted.
Database: The name of the PostgreSQL database you want to cache to. Must match the name of a PostgreSQL database hosted on the specified server.
User name: The username of a user registered with the selected PostgreSQL database.
Password: The password associated with the specified user.

CacheLocation

Specifies the path to the cache when caching to a file.

Data Type

string

Default Value

"%APPDATA%\\CData\\Tally Data Provider"

Remarks

The CacheLocation is a simple, file-based cache.

If left unspecified, the default location is %APPDATA%\\CData\\Tally Data Provider, where %APPDATA% is set to the user's configuration directory:


Platform	%APPDATA%
Windows	The value of the APPDATA environment variable
Linux	~/.config

CacheTolerance

Notes the tolerance, in seconds, for stale data in the specified cache database. Requires AutoCache to be set to True.

Data Type

int

Default Value

600

Remarks

When you execute a query for tables in the cache, the connector checks the time elapsed since the last update to the cache.

If the last update to the cache is older than the value of this connection property (measured in seconds), the connector refreshes the cache.

Otherwise, the connector returns data directly from the cache.

Offline

Gets the data from the specified cache database instead of live Tally data.

Data Type

bool

Default Value

false

Remarks

When this connection property is set to True, all queries execute against the cache database instead of the live Tally data.

In this mode, some SQL operations like INSERT, UPDATE, DELETE, and CACHE are disabled.

CacheMetadata

Determines whether the provider caches table metadata to a file-based cache database.

Data Type

bool

Default Value

false

Remarks

When this connection property is set to True, as you execute queries, table metadata in the Tally catalog is cached to the cache database specified by CacheConnection and CacheProvider, or, if those connection properties are not set, to the user's home directory.

The location of your home directory varies by platform:


Platform	Home Directory
Windows	%APPDATA%\\CData\\Tally Data Provider
Mac	~/Library/Application Support/CData/Tally Data Provider
Unix	~/.config/CData/Tally Data Provider

A table's metadata is retrieved only once, when the table is queried for the first time.

When to Use CacheMetadata

When there are a large number of Tally tables and columns for the connector to retrieve during metadata discovery, the connector may take a while to list all table metadata.

You may experience slow metadata retrieval when:

Your Tally instance naturally has a large table count.
The connector has been configured, via its connection properties, to discover more tables than it would under its default configuration.
You make many short-lived connections to the connector.

With CacheMetadata enabled, all retrieved metadata is mirrored in the cache database. This means that any subsequent attempts by the connector to discover metadata are much faster, as this metadata is then read directly from the cache database, without needing to spend time requesting metadata from Tally.

When Not to Use CacheMetadata

The connector automatically persists metadata in memory for up to an hour when you first discover the metadata for a table or view, so CacheMetadata is generally not necessary.

CacheMetadata is not ideal in scenarios where you are working with volatile metadata. The first time you query a table, the connector caches its metadata to the cache database file. This cache is not dynamically updated to reflect updates to the table schema, so you must delete and rebuild the cache database file to pick up new, changed, or deleted columns.

Miscellaneous

This section provides a complete list of the Miscellaneous properties you can configure in the connection string for this provider.

Property	Description
MaxRows	Specifies the maximum number of rows returned for queries that do not include either aggregation or GROUP BY.
Other	Specifies advanced connection properties for specialized scenarios. Use this property only under the guidance of our Support team to address specific issues.
PseudoColumns	Specifies the pseudocolumns to expose as table columns, expressed as a string in the format 'TableName=ColumnName;TableName=ColumnName'.
RTK	Specifies the runtime key for licensing the provider. If unset or invalid, the provider defaults to the standard licensing method. This property is only required in environments where the standard licensing method is unsupported or requires a runtime key.
Timeout	Specifies the maximum time, in seconds, that the provider waits for a server response before throwing a timeout error.
UserDefinedViews	Specifies a filepath to a JSON configuration file that defines custom views. The provider automatically detects and uses the views specified in this file.

MaxRows

Specifies the maximum number of rows returned for queries that do not include either aggregation or GROUP BY.

Data Type

int

Default Value

-1

Remarks

The default value for this property, -1, means that no row limit is enforced unless the query explicitly includes a LIMIT clause. (When a query includes a LIMIT clause, the value specified in the query takes precedence over the MaxRows setting.)

Setting MaxRows to a whole number greater than 0 ensures that queries do not return excessively large result sets by default.

This property is useful for optimizing performance and preventing excessive resource consumption when executing queries that could otherwise return very large datasets.

Other

Specifies advanced connection properties for specialized scenarios. Use this property only under the guidance of our Support team to address specific issues.

Data Type

string

Default Value

""

Remarks

This property allows advanced users to configure hidden properties for specialized situations, with the advice of our Support team. These settings are not required for normal use cases but can address unique requirements or provide additional functionality. To define multiple properties, use a semicolon-separated list.

Note: It is strongly recommended to set these properties only when advised by the Support team to address specific scenarios or issues.

Caching Configuration


Property	Description
CachePartial=True	Caches only a subset of columns, which you can specify in your query.
QueryPassthrough=True	Passes the specified query to the cache database instead of using the SQL parser of the connector.

Integration and Formatting


Property	Description
DefaultColumnSize	Sets the default length of string fields when the data source does not provide column length in the metadata. The default value is 2000.
ConvertDateTimeToGMT=True	Converts date-time values to GMT, instead of the local time of the machine. The default value is False (use local time).
RecordToFile=filename	Records the underlying socket data transfer to the specified file.

PseudoColumns

Specifies the pseudocolumns to expose as table columns, expressed as a string in the format 'TableName=ColumnName;TableName=ColumnName'.

Data Type

string

Default Value

""

Remarks

This property allows you to define which pseudocolumns the connector exposes as table columns.

To specify individual pseudocolumns, use the following format:

Table1=Column1;Table1=Column2;Table2=Column3

To include all pseudocolumns for all tables use:

*=*

RTK

Specifies the runtime key for licensing the provider. If unset or invalid, the provider defaults to the standard licensing method. This property is only required in environments where the standard licensing method is unsupported or requires a runtime key.

Data Type

string

Default Value

""

Remarks

This property is typically unnecessary, as most configurations support a standard licensing mechanism.

Warning: The value of this property takes precedence over all existing licensing information. To avoid licensing errors, ensure the provided runtime key is correct.

Timeout

Specifies the maximum time, in seconds, that the provider waits for a server response before throwing a timeout error.

Data Type

int

Default Value

60

Remarks

The timeout applies to each individual communication with the server rather than the entire query or operation. For example, a query could continue running beyond 60 seconds if each paging call completes within the timeout limit.

Timeout is set to 60 seconds by default. To disable timeouts, set this property to 0.

Disabling the timeout allows operations to run indefinitely until they succeed or fail due to other conditions such as server-side timeouts, network interruptions, or resource limits on the server.

Note: Use this property cautiously to avoid long-running operations that could degrade performance or result in unresponsive behavior.

UserDefinedViews

Specifies a filepath to a JSON configuration file that defines custom views. The provider automatically detects and uses the views specified in this file.

Data Type

string

Default Value

""

Remarks

UserDefinedViews allows you to define and manage custom views through a JSON-formatted configuration file called UserDefinedViews.json. These views are automatically recognized by the connector and enable you to execute custom SQL queries as if they were standard database views. The JSON file defines each view as a root element with a child element called "query", which contains the SQL query for the view.

For example:

{
	"MyView": {
		"query": "SELECT * FROM Company WHERE MyColumn = 'value'"
	},
	"MyView2": {
		"query": "SELECT * FROM MyTable WHERE Id IN (1,2,3)"
	}
}

You can use this property to define multiple views in a single file and specify the filepath. For example:

UserDefinedViews=C:\Path\To\UserDefinedViews.json

When you specify a view in UserDefinedViews, the connector only sees that view.

For further information, see User Defined Views.

Third Party Copyrights

LZMA from 7Zip LZMA SDK

LZMA SDK is placed in the public domain.

Anyone is free to copy, modify, publish, use, compile, sell, or distribute the original LZMA SDK code, either in source code form or as a compiled binary, for any purpose, commercial or non-commercial, and by any means.

LZMA2 from XZ SDK

Version 1.9 and older are in the public domain.

Xamarin.Forms

Xamarin SDK

The MIT License (MIT)

Copyright (c) .NET Foundation Contributors

Permission is hereby granted, free of charge, to any person obtaining a copy of this software and associated documentation files (the "Software"), to deal in the Software without restriction, including without limitation the rights to use, copy, modify, merge, publish, distribute, sublicense, and/or sell copies of the Software, and to permit persons to whom the Software is furnished to do so, subject to the following conditions:

The above copyright notice and this permission notice shall be included in all copies or substantial portions of the Software.

THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.

NSIS 3.10

Copyright (C) 1999-2025 Contributors THE ACCOMPANYING PROGRAM IS PROVIDED UNDER THE TERMS OF THIS COMMON PUBLIC LICENSE ("AGREEMENT"). ANY USE, REPRODUCTION OR DISTRIBUTION OF THE PROGRAM CONSTITUTES RECIPIENT'S ACCEPTANCE OF THIS AGREEMENT.

1. DEFINITIONS

"Contribution" means:

a) in the case of the initial Contributor, the initial code and documentation distributed under this Agreement, and b) in the case of each subsequent Contributor:

i) changes to the Program, and

ii) additions to the Program;

where such changes and/or additions to the Program originate from and are distributed by that particular Contributor. A Contribution 'originates' from a Contributor if it was added to the Program by such Contributor itself or anyone acting on such Contributor's behalf. Contributions do not include additions to the Program which: (i) are separate modules of software distributed in conjunction with the Program under their own license agreement, and (ii) are not derivative works of the Program.

"Contributor" means any person or entity that distributes the Program.

"Licensed Patents " mean patent claims licensable by a Contributor which are necessarily infringed by the use or sale of its Contribution alone or when combined with the Program.

"Program" means the Contributions distributed in accordance with this Agreement.

"Recipient" means anyone who receives the Program under this Agreement, including all Contributors.

2. GRANT OF RIGHTS

a) Subject to the terms of this Agreement, each Contributor hereby grants Recipient a non-exclusive, worldwide, royalty-free copyright license to reproduce, prepare derivative works of, publicly display, publicly perform, distribute and sublicense the Contribution of such Contributor, if any, and such derivative works, in source code and object code form.

b) Subject to the terms of this Agreement, each Contributor hereby grants Recipient a non-exclusive, worldwide, royalty-free patent license under Licensed Patents to make, use, sell, offer to sell, import and otherwise transfer the Contribution of such Contributor, if any, in source code and object code form. This patent license shall apply to the combination of the Contribution and the Program if, at the time the Contribution is added by the Contributor, such addition of the Contribution causes such combination to be covered by the Licensed Patents. The patent license shall not apply to any other combinations which include the Contribution. No hardware per se is licensed hereunder.

c) Recipient understands that although each Contributor grants the licenses to its Contributions set forth herein, no assurances are provided by any Contributor that the Program does not infringe the patent or other intellectual property rights of any other entity. Each Contributor disclaims any liability to Recipient for claims brought by any other entity based on infringement of intellectual property rights or otherwise. As a condition to exercising the rights and licenses granted hereunder, each Recipient hereby assumes sole responsibility to secure any other intellectual property rights needed, if any. For example, if a third party patent license is required to allow Recipient to distribute the Program, it is Recipient's responsibility to acquire that license before distributing the Program.

d) Each Contributor represents that to its knowledge it has sufficient copyright rights in its Contribution, if any, to grant the copyright license set forth in this Agreement.

3. REQUIREMENTS

A Contributor may choose to distribute the Program in object code form under its own license agreement, provided that:

a) it complies with the terms and conditions of this Agreement; and

b) its license agreement:

i) effectively disclaims on behalf of all Contributors all warranties and conditions, express and implied, including warranties or conditions of title and non-infringement, and implied warranties or conditions of merchantability and fitness for a particular purpose;

ii) effectively excludes on behalf of all Contributors all liability for damages, including direct, indirect, special, incidental and consequential damages, such as lost profits;

iii) states that any provisions which differ from this Agreement are offered by that Contributor alone and not by any other party; and

iv) states that source code for the Program is available from such Contributor, and informs licensees how to obtain it in a reasonable manner on or through a medium customarily used for software exchange.

When the Program is made available in source code form:

a) it must be made available under this Agreement; and

b) a copy of this Agreement must be included with each copy of the Program.

Contributors may not remove or alter any copyright notices contained within the Program.

Each Contributor must identify itself as the originator of its Contribution, if any, in a manner that reasonably allows subsequent Recipients to identify the originator of the Contribution.

4. COMMERCIAL DISTRIBUTION

Commercial distributors of software may accept certain responsibilities with respect to end users, business partners and the like. While this license is intended to facilitate the commercial use of the Program, the Contributor who includes the Program in a commercial product offering should do so in a manner which does not create potential liability for other Contributors. Therefore, if a Contributor includes the Program in a commercial product offering, such Contributor ("Commercial Contributor") hereby agrees to defend and indemnify every other Contributor ("Indemnified Contributor") against any losses, damages and costs (collectively "Losses") arising from claims, lawsuits and other legal actions brought by a third party against the Indemnified Contributor to the extent caused by the acts or omissions of such Commercial Contributor in connection with its distribution of the Program in a commercial product offering. The obligations in this section do not apply to any claims or Losses relating to any actual or alleged intellectual property infringement. In order to qualify, an Indemnified Contributor must: a) promptly notify the Commercial Contributor in writing of such claim, and b) allow the Commercial Contributor to control, and cooperate with the Commercial Contributor in, the defense and any related settlement negotiations. The Indemnified Contributor may participate in any such claim at its own expense.

For example, a Contributor might include the Program in a commercial product offering, Product X. That Contributor is then a Commercial Contributor. If that Commercial Contributor then makes performance claims, or offers warranties related to Product X, those performance claims and warranties are such Commercial Contributor's responsibility alone. Under this section, the Commercial Contributor would have to defend claims against the other Contributors related to those performance claims and warranties, and if a court requires any other Contributor to pay any damages as a result, the Commercial Contributor must pay those damages.

5. NO WARRANTY

EXCEPT AS EXPRESSLY SET FORTH IN THIS AGREEMENT, THE PROGRAM IS PROVIDED ON AN "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED INCLUDING, WITHOUT LIMITATION, ANY WARRANTIES OR CONDITIONS OF TITLE, NON-INFRINGEMENT, MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. Each Recipient is solely responsible for determining the appropriateness of using and distributing the Program and assumes all risks associated with its exercise of rights under this Agreement, including but not limited to the risks and costs of program errors, compliance with applicable laws, damage to or loss of data, programs or equipment, and unavailability or interruption of operations.

6. DISCLAIMER OF LIABILITY

EXCEPT AS EXPRESSLY SET FORTH IN THIS AGREEMENT, NEITHER RECIPIENT NOR ANY CONTRIBUTORS SHALL HAVE ANY LIABILITY FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING WITHOUT LIMITATION LOST PROFITS), HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OR DISTRIBUTION OF THE PROGRAM OR THE EXERCISE OF ANY RIGHTS GRANTED HEREUNDER, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGES.

7. GENERAL

If any provision of this Agreement is invalid or unenforceable under applicable law, it shall not affect the validity or enforceability of the remainder of the terms of this Agreement, and without further action by the parties hereto, such provision shall be reformed to the minimum extent necessary to make such provision valid and enforceable.

If Recipient institutes patent litigation against a Contributor with respect to a patent applicable to software (including a cross-claim or counterclaim in a lawsuit), then any patent licenses granted by that Contributor to such Recipient under this Agreement shall terminate as of the date such litigation is filed. In addition, if Recipient institutes patent litigation against any entity (including a cross-claim or counterclaim in a lawsuit) alleging that the Program itself (excluding combinations of the Program with other software or hardware) infringes such Recipient's patent(s), then such Recipient's rights granted under Section 2(b) shall terminate as of the date such litigation is filed.

All Recipient's rights under this Agreement shall terminate if it fails to comply with any of the material terms or conditions of this Agreement and does not cure such failure in a reasonable period of time after becoming aware of such noncompliance. If all Recipient's rights under this Agreement terminate, Recipient agrees to cease use and distribution of the Program as soon as reasonably practicable. However, Recipient's obligations under this Agreement and any licenses granted by Recipient relating to the Program shall continue and survive.

Everyone is permitted to copy and distribute copies of this Agreement, but in order to avoid inconsistency the Agreement is copyrighted and may only be modified in the following manner. The Agreement Steward reserves the right to publish new versions (including revisions) of this Agreement from time to time. No one other than the Agreement Steward has the right to modify this Agreement. IBM is the initial Agreement Steward. IBM may assign the responsibility to serve as the Agreement Steward to a suitable separate entity. Each new version of the Agreement will be given a distinguishing version number. The Program (including Contributions) may always be distributed subject to the version of the Agreement under which it was received. In addition, after a new version of the Agreement is published, Contributor may elect to distribute the Program (including its Contributions) under the new version. Except as expressly stated in Sections 2(a) and 2(b) above, Recipient receives no rights or licenses to the intellectual property of any Contributor under this Agreement, whether expressly, by implication, estoppel or otherwise. All rights in the Program not expressly granted under this Agreement are reserved.

This Agreement is governed by the laws of the State of New York and the intellectual property laws of the United States of America. No party to this Agreement will bring a legal action under this Agreement more than one year after the cause of action arose. Each party waives its rights to a jury trial in any resulting litigation.

AdoptOpenJDK / Adoptium Temurin JRE 17.0.18_8

Apache License, Version 2.0

TERMS AND CONDITIONS FOR USE, REPRODUCTION, AND DISTRIBUTION

1. Definitions. "License" shall mean the terms and conditions for use, reproduction, and distribution as defined by Sections 1 through 9 of this document.

"Licensor" shall mean the copyright owner or entity authorized by the copyright owner that is granting the License.

"Legal Entity" shall mean the union of the acting entity and all other entities that control, are controlled by, or are under common control with that entity. For the purposes of this definition, "control" means (i) the power, direct or indirect, to cause the direction or management of such entity, whether by contract or otherwise, or (ii) ownership of fifty percent (50%) or more of the outstanding shares, or (iii) beneficial ownership of such entity.

"You" (or "Your") shall mean an individual or Legal Entity exercising permissions granted by this License.

"Source" form shall mean the preferred form for making modifications, including but not limited to software source code, documentation source, and configuration files.

"Object" form shall mean any form resulting from mechanical transformation or translation of a Source form, including but not limited to compiled object code, generated documentation, and conversions to other media types.

"Work" shall mean the work of authorship, whether in Source or Object form, made available under the License, as indicated by a copyright notice that is included in or attached to the work (an example is provided in the Appendix below).

"Derivative Works" shall mean any work, whether in Source or Object form, that is based on (or derived from) the Work and for which the editorial revisions, annotations, elaborations, or other modifications represent, as a whole, an original work of authorship. For the purposes of this License, Derivative Works shall not include works that remain separable from, or merely link (or bind by name) to the interfaces of, the Work and Derivative Works thereof.

"Contribution" shall mean any work of authorship, including the original version of the Work and any modifications or additions to that Work or Derivative Works thereof, that is intentionally submitted to Licensor for inclusion in the Work by the copyright owner or by an individual or Legal Entity authorized to submit on behalf of the copyright owner. For the purposes of this definition, "submitted" means any form of electronic, verbal, or written communication sent to the Licensor or its representatives, including but not limited to communication on electronic mailing lists, source code control systems, and issue tracking systems that are managed by, or on behalf of, the Licensor for the purpose of discussing and improving the Work, but excluding communication that is conspicuously marked or otherwise designated in writing by the copyright owner as "Not a Contribution."

"Contributor" shall mean Licensor and any individual or Legal Entity on behalf of whom a Contribution has been received by Licensor and subsequently incorporated within the Work.

2. Grant of Copyright License. Subject to the terms and conditions of this License, each Contributor hereby grants to You a perpetual, worldwide, non-exclusive, no-charge, royalty-free, irrevocable copyright license to reproduce, prepare Derivative Works of, publicly display, publicly perform, sublicense, and distribute the Work and such Derivative Works in Source or Object form.

3. Grant of Patent License. Subject to the terms and conditions of this License, each Contributor hereby grants to You a perpetual, worldwide, non-exclusive, no-charge, royalty-free, irrevocable (except as stated in this section) patent license to make, have made, use, offer to sell, sell, import, and otherwise transfer the Work, where such license applies only to those patent claims licensable by such Contributor that are necessarily infringed by their Contribution(s) alone or by combination of their Contribution(s) with the Work to which such Contribution(s) was submitted. If You institute patent litigation against any entity (including a cross-claim or counterclaim in a lawsuit) alleging that the Work or a Contribution incorporated within the Work constitutes direct or contributory patent infringement, then any patent licenses granted to You under this License for that Work shall terminate as of the date such litigation is filed.

4. Redistribution. You may reproduce and distribute copies of the Work or Derivative Works thereof in any medium, with or without modifications, and in Source or Object form, provided that You meet the following conditions:

You must give any other recipients of the Work or Derivative Works a copy of this License; and
You must cause any modified files to carry prominent notices stating that You changed the files; and
You must retain, in the Source form of any Derivative Works that You distribute, all copyright, patent, trademark, and attribution notices from the Source form of the Work, excluding those notices that do not pertain to any part of the Derivative Works; and
If the Work includes a "NOTICE" text file as part of its distribution, then any Derivative Works that You distribute must include a readable copy of the attribution notices contained within such NOTICE file, excluding those notices that do not pertain to any part of the Derivative Works, in at least one of the following places: within a NOTICE text file distributed as part of the Derivative Works; within the Source form or documentation, if provided along with the Derivative Works; or, within a display generated by the Derivative Works, if and wherever such third-party notices normally appear. The contents of the NOTICE file are for informational purposes only and do not modify the License. You may add Your own attribution notices within Derivative Works that You distribute, alongside or as an addendum to the NOTICE text from the Work, provided that such additional attribution notices cannot be construed as modifying the License.

You may add Your own copyright statement to Your modifications and may provide additional or different license terms and conditions for use, reproduction, or distribution of Your modifications, or for any such Derivative Works as a whole, provided Your use, reproduction, and distribution of the Work otherwise complies with the conditions stated in this License.

5. Submission of Contributions. Unless You explicitly state otherwise, any Contribution intentionally submitted for inclusion in the Work by You to the Licensor shall be under the terms and conditions of this License, without any additional terms or conditions. Notwithstanding the above, nothing herein shall supersede or modify the terms of any separate license agreement you may have executed with Licensor regarding such Contributions.

6. Trademarks. This License does not grant permission to use the trade names, trademarks, service marks, or product names of the Licensor, except as required for reasonable and customary use in describing the origin of the Work and reproducing the content of the NOTICE file.

7. Disclaimer of Warranty. Unless required by applicable law or agreed to in writing, Licensor provides the Work (and each Contributor provides its Contributions) on an "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied, including, without limitation, any warranties or conditions of TITLE, NON-INFRINGEMENT, MERCHANTABILITY, or FITNESS FOR A PARTICULAR PURPOSE. You are solely responsible for determining the appropriateness of using or redistributing the Work and assume any risks associated with Your exercise of permissions under this License.

8. Limitation of Liability. In no event and under no legal theory, whether in tort (including negligence), contract, or otherwise, unless required by applicable law (such as deliberate and grossly negligent acts) or agreed to in writing, shall any Contributor be liable to You for damages, including any direct, indirect, special, incidental, or consequential damages of any character arising as a result of this License or out of the use or inability to use the Work (including but not limited to damages for loss of goodwill, work stoppage, computer failure or malfunction, or any and all other commercial damages or losses), even if such Contributor has been advised of the possibility of such damages.

9. Accepting Warranty or Additional Liability. While redistributing the Work or Derivative Works thereof, You may choose to offer, and charge a fee for, acceptance of support, warranty, indemnity, or other liability obligations and/or rights consistent with this License. However, in accepting such obligations, You may act only on Your own behalf and on Your sole responsibility, not on behalf of any other Contributor, and only if You agree to indemnify, defend, and hold each Contributor harmless for any liability incurred by, or claims asserted against, such Contributor by reason of your accepting any such warranty or additional liability.

END OF TERMS AND CONDITIONS

Eclipse Distribution License - v 1.0

Redistribution and use in source and binary forms, with or without modification, are permitted provided that the following conditions are met:

Redistributions of source code must retain the above copyright notice, this list of conditions and the following disclaimer.
Redistributions in binary form must reproduce the above copyright notice, this list of conditions and the following disclaimer in the documentation and/or other materials provided with the distribution.
Neither the name of the Eclipse Foundation, Inc. nor the names of its contributors may be used to endorse or promote products derived from this software without specific prior written permission.

THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.

Eclipse Public License - v 2.0

THE ACCOMPANYING PROGRAM IS PROVIDED UNDER THE TERMS OF THIS ECLIPSE PUBLIC LICENSE ("AGREEMENT"). ANY USE, REPRODUCTION OR DISTRIBUTION OF THE PROGRAM CONSTITUTES RECIPIENT'S ACCEPTANCE OF THIS AGREEMENT.

1. DEFINITIONS "Contribution" means:

a) in the case of the initial Contributor, the initial content Distributed under this Agreement, and
b) in the case of each subsequent Contributor:
- i) changes to the Program, and
- ii) additions to the Program;
where such changes and/or additions to the Program originate from and are Distributed by that particular Contributor. A Contribution "originates" from a Contributor if it was added to the Program by such Contributor itself or anyone acting on such Contributor's behalf. Contributions do not include changes or additions to the Program that are not Modified Works.

"Contributor" means any person or entity that Distributes the Program. "Licensed Patents" mean patent claims licensable by a Contributor which are necessarily infringed by the use or sale of its Contribution alone or when combined with the Program.

"Program" means the Contributions Distributed in accordance with this Agreement.

"Recipient" means anyone who receives the Program under this Agreement or any Secondary License (as applicable), including Contributors.

"Derivative Works" shall mean any work, whether in Source Code or other form, that is based on (or derived from) the Program and for which the editorial revisions, annotations, elaborations, or other modifications represent, as a whole, an original work of authorship.

"Modified Works" shall mean any work in Source Code or other form that results from an addition to, deletion from, or modification of the contents of the Program, including, for purposes of clarity any new file in Source Code form that contains any contents of the Program. Modified Works shall not include works that contain only declarations, interfaces, types, classes, structures, or files of the Program solely in each case in order to link to, bind by name, or subclass the Program or Modified Works thereof.

"Distribute" means the acts of a) distributing or b) making available in any manner that enables the transfer of a copy.

"Source Code" means the form of a Program preferred for making modifications, including but not limited to software source code, documentation source, and configuration files.

"Secondary License" means either the GNU General Public License, Version 2.0, or any later versions of that license, including any exceptions or additional permissions as identified by the initial Contributor.

2. GRANT OF RIGHTS

a) Subject to the terms of this Agreement, each Contributor hereby grants Recipient a non-exclusive, worldwide, royalty-free copyright license to reproduce, prepare Derivative Works of, publicly display, publicly perform, Distribute and sublicense the Contribution of such Contributor, if any, and such Derivative Works.
b) Subject to the terms of this Agreement, each Contributor hereby grants Recipient a non-exclusive, worldwide, royalty-free patent license under Licensed Patents to make, use, sell, offer to sell, import and otherwise transfer the Contribution of such Contributor, if any, in Source Code or other form. This patent license shall apply to the combination of the Contribution and the Program if, at the time the Contribution is added by the Contributor, such addition of the Contribution causes such combination to be covered by the Licensed Patents. The patent license shall not apply to any other combinations which include the Contribution. No hardware per se is licensed hereunder.
c) Recipient understands that although each Contributor grants the licenses to its Contributions set forth herein, no assurances are provided by any Contributor that the Program does not infringe the patent or other intellectual property rights of any other entity. Each Contributor disclaims any liability to Recipient for claims brought by any other entity based on infringement of intellectual property rights or otherwise. As a condition to exercising the rights and licenses granted hereunder, each Recipient hereby assumes sole responsibility to secure any other intellectual property rights needed, if any. For example, if a third party patent license is required to allow Recipient to Distribute the Program, it is Recipient's responsibility to acquire that license before distributing the Program.
d) Each Contributor represents that to its knowledge it has sufficient copyright rights in its Contribution, if any, to grant the copyright license set forth in this Agreement.
e) Notwithstanding the terms of any Secondary License, no Contributor makes additional grants to any Recipient (other than those set forth in this Agreement) as a result of such Recipient's receipt of the Program under the terms of a Secondary License (if permitted under the terms of Section 3).

3. REQUIREMENTS 3.1 If a Contributor Distributes the Program in any form, then:

a) the Program must also be made available as Source Code, in accordance with section 3.2, and the Contributor must accompany the Program with a statement that the Source Code for the Program is available under this Agreement, and informs Recipients how to obtain it in a reasonable manner on or through a medium customarily used for software exchange; and
b) the Contributor may Distribute the Program under a license different than this Agreement, provided that such license:
- i) effectively disclaims on behalf of all other Contributors all warranties and conditions, express and implied, including warranties or conditions of title and non-infringement, and implied warranties or conditions of merchantability and fitness for a particular purpose;
- ii) effectively excludes on behalf of all other Contributors all liability for damages, including direct, indirect, special, incidental and consequential damages, such as lost profits;
- iii) does not attempt to limit or alter the recipients' rights in the Source Code under section 3.2; and
- iv) requires any subsequent distribution of the Program by any party to be under a license that satisfies the requirements of this section 3.

3.2 When the Program is Distributed as Source Code:

a) it must be made available under this Agreement, or if the Program (i) is combined with other material in a separate file or files made available under a Secondary License, and (ii) the initial Contributor attached to the Source Code the notice described in Exhibit A of this Agreement, then the Program may be made available under the terms of such Secondary Licenses, and
b) a copy of this Agreement must be included with each copy of the Program.

3.3 Contributors may not remove or alter any copyright, patent, trademark, attribution notices, disclaimers of warranty, or limitations of liability (‘notices') contained within the Program from any copy of the Program which they Distribute, provided that Contributors may add their own appropriate notices.

4. COMMERCIAL DISTRIBUTION Commercial distributors of software may accept certain responsibilities with respect to end users, business partners and the like. While this license is intended to facilitate the commercial use of the Program, the Contributor who includes the Program in a commercial product offering should do so in a manner which does not create potential liability for other Contributors. Therefore, if a Contributor includes the Program in a commercial product offering, such Contributor ("Commercial Contributor") hereby agrees to defend and indemnify every other Contributor ("Indemnified Contributor") against any losses, damages and costs (collectively "Losses") arising from claims, lawsuits and other legal actions brought by a third party against the Indemnified Contributor to the extent caused by the acts or omissions of such Commercial Contributor in connection with its distribution of the Program in a commercial product offering. The obligations in this section do not apply to any claims or Losses relating to any actual or alleged intellectual property infringement. In order to qualify, an Indemnified Contributor must: a) promptly notify the Commercial Contributor in writing of such claim, and b) allow the Commercial Contributor to control, and cooperate with the Commercial Contributor in, the defense and any related settlement negotiations. The Indemnified Contributor may participate in any such claim at its own expense.

For example, a Contributor might include the Program in a commercial product offering, Product X. That Contributor is then a Commercial Contributor. If that Commercial Contributor then makes performance claims, or offers warranties related to Product X, those performance claims and warranties are such Commercial Contributor's responsibility alone. Under this section, the Commercial Contributor would have to defend claims against the other Contributors related to those performance claims and warranties, and if a court requires any other Contributor to pay any damages as a result, the Commercial Contributor must pay those damages.

5. NO WARRANTY EXCEPT AS EXPRESSLY SET FORTH IN THIS AGREEMENT, AND TO THE EXTENT PERMITTED BY APPLICABLE LAW, THE PROGRAM IS PROVIDED ON AN "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED INCLUDING, WITHOUT LIMITATION, ANY WARRANTIES OR CONDITIONS OF TITLE, NON-INFRINGEMENT, MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. Each Recipient is solely responsible for determining the appropriateness of using and distributing the Program and assumes all risks associated with its exercise of rights under this Agreement, including but not limited to the risks and costs of program errors, compliance with applicable laws, damage to or loss of data, programs or equipment, and unavailability or interruption of operations.

6. DISCLAIMER OF LIABILITY EXCEPT AS EXPRESSLY SET FORTH IN THIS AGREEMENT, AND TO THE EXTENT PERMITTED BY APPLICABLE LAW, NEITHER RECIPIENT NOR ANY CONTRIBUTORS SHALL HAVE ANY LIABILITY FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING WITHOUT LIMITATION LOST PROFITS), HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OR DISTRIBUTION OF THE PROGRAM OR THE EXERCISE OF ANY RIGHTS GRANTED HEREUNDER, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGES.

7. GENERAL If any provision of this Agreement is invalid or unenforceable under applicable law, it shall not affect the validity or enforceability of the remainder of the terms of this Agreement, and without further action by the parties hereto, such provision shall be reformed to the minimum extent necessary to make such provision valid and enforceable.

If Recipient institutes patent litigation against any entity (including a cross-claim or counterclaim in a lawsuit) alleging that the Program itself (excluding combinations of the Program with other software or hardware) infringes such Recipient's patent(s), then such Recipient's rights granted under Section 2(b) shall terminate as of the date such litigation is filed.

All Recipient's rights under this Agreement shall terminate if it fails to comply with any of the material terms or conditions of this Agreement and does not cure such failure in a reasonable period of time after becoming aware of such noncompliance. If all Recipient's rights under this Agreement terminate, Recipient agrees to cease use and distribution of the Program as soon as reasonably practicable. However, Recipient's obligations under this Agreement and any licenses granted by Recipient relating to the Program shall continue and survive.

Everyone is permitted to copy and distribute copies of this Agreement, but in order to avoid inconsistency the Agreement is copyrighted and may only be modified in the following manner. The Agreement Steward reserves the right to publish new versions (including revisions) of this Agreement from time to time. No one other than the Agreement Steward has the right to modify this Agreement. The Eclipse Foundation is the initial Agreement Steward. The Eclipse Foundation may assign the responsibility to serve as the Agreement Steward to a suitable separate entity. Each new version of the Agreement will be given a distinguishing version number. The Program (including Contributions) may always be Distributed subject to the version of the Agreement under which it was received. In addition, after a new version of the Agreement is published, Contributor may elect to Distribute the Program (including its Contributions) under the new version.

Except as expressly stated in Sections 2(a) and 2(b) above, Recipient receives no rights or licenses to the intellectual property of any Contributor under this Agreement, whether expressly, by implication, estoppel or otherwise. All rights in the Program not expressly granted under this Agreement are reserved. Nothing in this Agreement is intended to be enforceable by any entity that is not a Contributor or Recipient. No third-party beneficiary rights are created under this Agreement.

Exhibit A – Form of Secondary Licenses Notice "This Source Code may also be made available under the following Secondary Licenses when the conditions for such availability set forth in the Eclipse Public License, v. 2.0 are satisfied: {name license(s), version(s), and exceptions or additional permissions here}."

Simply including a copy of this Agreement, including this Exhibit A is not sufficient to license the Source Code under Secondary Licenses.

If it is not possible or desirable to put the notice in a particular file, then You may include the notice in a location (such as a LICENSE file in a relevant directory) where a recipient would be likely to look for such a notice.

You may add additional accurate notices of copyright ownership.

GNU Classpath

Classpath is distributed under the terms of the GNU General Public License with the following clarification and special exception.

Linking this library statically or dynamically with other modules is making a combined work based on this library. Thus, the terms and conditions of the GNU General Public License cover the whole combination.

As a special exception, the copyright holders of this library give you permission to link this library with independent modules to produce an executable, regardless of the license terms of these independent modules, and to copy and distribute the resulting executable under terms of your choice, provided that you also meet, for each linked independent module, the terms and conditions of the license of that module. An independent module is a module which is not derived from or based on this library. If you modify this library, you may extend this exception to your version of the library, but you are not obligated to do so. If you do not wish to do so, delete this exception statement from your version.

As such, it can be used to run, create and distribute a large class of applications and applets. When GNU Classpath is used unmodified as the core class library for a virtual machine, compiler for the java languge, or for a program written in the java programming language it does not affect the licensing for distributing those programs directly.

OpenJDK Assembly Exception

The OpenJDK source code made available by Oracle America, Inc. (Oracle) at openjdk.java.net ("OpenJDK Code") is distributed under the terms of the GNU General Public License <http://www.gnu.org/copyleft/gpl.html> version 2 only ("GPL2"), with the following clarification and special exception.

Linking this OpenJDK Code statically or dynamically with other code is making a combined work based on this library. Thus, the terms and conditions of GPL2 cover the whole combination.

As a special exception, Oracle gives you permission to link this OpenJDK Code with certain code licensed by Oracle as indicated at http://openjdk.java.net/legal/exception-modules-2007-05-08.html ("Designated Exception Modules") to produce an executable, regardless of the license terms of the Designated Exception Modules, and to copy and distribute the resulting executable under GPL2, provided that the Designated Exception Modules continue to be governed by the licenses under which they were offered by Oracle.

As such, it allows licensees and sublicensees of Oracle's GPL2 OpenJDK Code to build an executable that includes those portions of necessary code that Oracle could not provide under GPL2 (or that Oracle has provided under GPL2 with the Classpath exception). If you modify or add to the OpenJDK code, that new GPL2 code may still be combined with Designated Exception Modules if the new code is made subject to this exception by its copyright holder.

CData Python Connector for Tally

CData Python Connector for Tally

Overview

Key Features

Getting Started

Using the Python Connector/Using from Tools

SQLAlchemy ORM

Pandas

Schema Discovery

Advanced Features

SQL Compliance

Data Model

Connection String Options

Getting Started

Connecting to Tally

Python Version Support

Tally Version Support

See Also

Package Installation

Dependencies

Installation

Upgrading

Licensing

Uninstallation

Establishing a Connection

Connecting to Tally

Configuring JNI

Configure the Config INI File

Configure Environment Variables

Custom Logger

Changelog

General Changes

Using the Connector

Connecting from Code

Executing SQL

Executing Stored Procedures

Connecting

Connecting with the cdata.tally Module:

Querying Data

Executing Queries

Parameterized Queries

Calling Stored Procedures

Calling Stored Procedures Using Execute()

Calling Stored Procedures Using Callproc()

Using from Tools

Python Integration Guides

Complete List of Tally Integration Quickstarts

From SQLAlchemy

Connecting From SQLAlchemy

Reflecting Metadata With SQLAlchemy

Querying Data From SQLAlchemy

Connecting

Connecting With a Dialect URL

Reflecting Metadata

Modeling Data Using a Mapping Class

Automatically Reflecting Metadata

Querying Data

Querying Data Using the Query Method

Querying Data Using the Execute Method

Executing JOINs

Implicit Joining

Other Join Forms

Other SQL Clauses

ORDER BY

GROUP BY

LIMIT and OFFSET

Aggregate Functions

COUNT

SUM

AVG

MAX and MIN

From Pandas

Connecting

Querying Data

From Matplotlib

Using PyPlot

From Petl

Install Required Modules

Connecting

Extract, Transform, and Load the Tally Data